Need Help On Repairing A Tek10
Posted 04 November 2007 - 03:39 PM
Im interested to all idea's.
The problem is when I cock it back it just slides back down and nothing happens.
Posted 04 November 2007 - 04:13 PM
1) The bracing for the rod is broken. Frost vectron already covered this; because the tek ten is very similar to the maverick (the only real difference being that the turret indexes into the next position when cocking the gun rather than pulling the trigger).
2) The cocking rod runs directly through the back of the plunger ram, and your plunger ram could possibly be broken at the back. This would make it impossible to cock.
3) The locking mech is either worn or is missing the spring, which means that the plunger ram would never stay in the cocked position.
This is all I could come up with considering the information given. When you pull back on the cocking mech, is the plunger ram being pulled back as well (can you feel the tension of the spring)?
Posted 04 November 2007 - 06:59 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users