NerfHaven: mrdarkmonkey96 - Viewing Profile - NerfHaven

Anyone who is interested in high quality, and inexpensive custom nerf gun painting, Check out my youtube channel [Removed]. send me pm for details either on the haven or youtube, and I check each one daily.

So, my first angel breech, a earlier this year, I cut everything with a dremel. I cut all of the peices to length, and all of the lips with a dremel. When I was finshed, I cursed the sloppiness. Consequently, this time I chose to use pipe cutters. Im cutting and going, hmm, nice clean cuts. then I try to fit things together......Yeah right.. . I tried to put the 19/32 and the 9/16 together, and there's a lip making the sliding rather difficult. Sanding that lip helped, but I was never able to regain the smootheness of the original uncut brass. How do you cut your brass?? Best answer( albiet that it actually works) wins bragging rights.

I just recieved the brass from Ace hardware in Hutchinson, Minnesota. They were very patient, and shipped directly to my house. For any Minnesota nerfers, there number is 1-320-587-8888. You might not have to dial the one if you are fairly close to hutch. Now that I have the materials for the breech, I need a spring. For k26 springs I typically use the link on Coops youtube, but that seems to have walked off. The person this is intended for mainly wars indoors, so would a k25 be enough power?? I tried searching K26 and K25 on mcmasters website, but to no avail. If someone could give me a part number, that would be fantastic. Also, does anybody know the compression weight of the k25/k26? I think the stock spring is around 2kg.

I recently bought a swarmfire for 30% off at a k-mart that was going out of buisness. I realized it took 6 c batteries, and thought to myself, " I wish it would run off of r/c car type batteries." I have seen Ice do this with his stampede, but I'm not sure how to hook stuff up, or what batteries to use. Links, videos, pictures, etc would be much appreciated.

I have a longshot contract, asking for an angel breech, but all of the stores (Home Depot, Menards, Runnings) don't carry brass. I live in the Spicer area of Minnesota. If anybody knows where I can buy brass, that would be great! Also any tips on the making of an angel would be much appreciated.