Jump to content


Photo

"bob"

Rapidfire 20 + Triple Strike

8 replies to this topic

#1 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 04 June 2007 - 08:01 PM

This has been a slow-going modification because it took quite a while to get around to it.
Posted Image
I mounted a leftover Triple Strike blast chamber to the front recessed area. It's triggered by a directional control valve.
Posted Image
Internally I replaced the flow/speed control valve with a coupler and replaced the tubing between that part and the trigger. I then linked the triple strike in with the rest of the tubing. The 1/2" white PVC pipe is just to reinforce the gun and add a forward handle.
Posted Image
The triple strike blast chamber has a 3/4" to 1/2" adapter glued to it so I can use a flip-around clip.

Video:
Ranges

RF20: 30-40 feet @ 40psi
Triple Strike: 90-100 feet @ 40 psi

I need to up the pressure output on the regulator to use this gun. I also need to replace the RF20 barrels with PETG.

Edit: Tried the pressure at 50psi and 60psi. 50psi was good, 60psi was FREAKING INSANE in regards to how fast it was shooting. I need to make another video tomorrow...

Edited by CaptainSlug, 04 June 2007 - 09:53 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#2 Chewbacca

Chewbacca

    Member

  • Members
  • 95 posts

Posted 04 June 2007 - 08:19 PM

That's awesome. After you replace the barrels this gun will be a beast. Oh, and one question:
Why bob?

Edited by Chewbacca, 04 June 2007 - 08:25 PM.

  • 0

#3 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 04 June 2007 - 08:23 PM

This (and most of my other guns) are setup specifically to be used with my external tank. Which you can see me wearing in the video.
"BOB" because I removed so much of the gun and as an homage to pure evil (Twin Peaks reference).

Edited by CaptainSlug, 04 June 2007 - 08:24 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#4 Chewbacca

Chewbacca

    Member

  • Members
  • 95 posts

Posted 04 June 2007 - 08:32 PM

Yes, I saw that, and thats why I edited my post. Man, I feel so stupid for not seeing your external tank. :D Anyway, great mod/integration. :)

Edited by Chewbacca, 04 June 2007 - 10:00 PM.

  • 0

#5 OfAllTheNerf

OfAllTheNerf

    Member

  • Members
  • 714 posts

Posted 04 June 2007 - 09:02 PM

Great job.

Very clean.

I really like that it will be hooked up to your backpack-tank, and that you never have to reload in a round of warring (unless you're using your Titan or something that takes alot of air).
  • 0
[color=#FF6600][Finesse]-[BitchX]

#6 Retiate

Retiate

    Member

  • Members
  • 778 posts

Posted 05 June 2007 - 12:01 AM

Man, I love that external tank. It adds so much RoF to all your guns it's rediculous. If you clip modded the RF20 and had replacement turrets you'd never be caught reloading.
Very clean, neat, and effective integration. I'm curious to see how the ranges will improve with PETG barrels.
  • 0

#7 Z-man12

Z-man12

    Member

  • Members
  • 232 posts

Posted 05 June 2007 - 10:51 PM

Looks like you beat me to gettiing an RF20 modded for external tanks. Its funny how you also took out the selector vavle and replaced it with a coupler like I did.

One thing I am thinknig might be intresting to try is get a verable flow needle valve and put it in place of the coupler. That way you can more effectivly controll the fire rate of the RF20.

As always a nice modification by the Captain. *thumbs up*
  • 0
I mod nerf guns so they look good. So leave my scopes, doodads, and trinkets alone I like them. I don't mind the weight and I started out that way on toy guns and its not going to change.

#8 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 05 June 2007 - 10:57 PM

One thing I am thinknig might be intresting to try is get a verable flow needle valve and put it in place of the coupler. That way you can more effectivly controll the fire rate of the RF20.

Actually I already have one inline on my tank setup I just never think to adjust it.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#9 Z-man12

Z-man12

    Member

  • Members
  • 232 posts

Posted 06 June 2007 - 10:19 PM

I figured you had already come up with some way to do that. I just thought I would check and see.
  • 0
I mod nerf guns so they look good. So leave my scopes, doodads, and trinkets alone I like them. I don't mind the weight and I started out that way on toy guns and its not going to change.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users