4 replies to this topic

[Bishop]

It seemed weird to make a topic just for this but its so useful I can't leave it alone and all the topics where this wound work in are dead. So I added some pictures.

When doing any single titan mod like ompas the barrel is allways kinda flimsy and its hard to shoot straight with a flimsy barrel. So you stabilize it. Theres many things you can do but I found this super effective and realy easy, not as messy as stuffing stuff around the barrel. This is hard to mess up. You just take a cap from a Vitamin Water bottle and viola! It clips on perfectly around the titans missle barrel. Just drill a hole in the center the width of the od of youre barrel material and its perfectly straight. Im sure similar bottle caps will work like ones on sobe life water, powerade, gatorade but im %100 sure Vitamin Water is a perfect fit.

As promised:

[funkyjake]

Hey, that's actually pretty clever.

[Retiate]

How do you get the hole so centered? I would probably drill it off center then my Titan would have no accuracy.

It's a neat idea, I like it.

[Bishop]

On all the bottle caps I have (basicaly on anything that has a cap) theres a little tiny lump in the center of the rubber on the other side giving you a perfect center to drill right through. Or you can just measure legnthwise, draw a line accross where you measure and rotate the cap 90 degrees draw another line (make lie a crosshair shape) and if you do that right you should have center where the lines cross.

[CaptainSlug]

I discovered earlier today that 3/4" PVC pipe caps fit almost perfectly inside the stock barrel. You can also use a 3/4" to 1/2" PVC adapter bushing with one down at the bottom of the stock barrel to act as a coupler of sorts if you want to have a breech system that relies on the thread on the stock barrel.