So you have your new Speedloader. 8 shot spring powered pump action “Nerf” gun. Get’s pretty good range, over 25 feet at least, stock. But you want more range, and be able to fire stefans? Look no further! Here’s a Lanard Speedloader Mod that’ll do just that.
Step 1 Take out all the screws.
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader004.jpg)
Step 2 Take out the front yellow turret. Notice all those ugly air restrictors! Take out the screws in it also.
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader005.jpg)
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader006.jpg)
Step 3 Push a small screwdriver through the back end of each hole, to pop out each air restrictor.
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader008.jpg)
Step 4 Take a 12 in. Section of 17/32 brass, and cut it into 8 1.5 inch segments. That should use the whole stick of brass.
Step5 Shove each segment into the original barrel stubs. IT should create a good seal.
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader011.jpg)
Step6 Cut away the front of the turret like so.
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader012.jpg)
Step7 Put the turret back together. Don’t forget these parts.
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader012.jpg)
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader007.jpg)
It should look like this.
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader013.jpg)
Step 8 Put back all of the internals.
There you have it, your finished Speedloader.
![Posted Image](http://i2.photobucket.com/albums/y20/renegade646/speedloader015.jpg)
Range
52 feet-- longest
38 feet-- shortest
Average 45 feet
Edited by Renegade, 20 November 2005 - 05:37 PM.