21 replies to this topic

[man with many guns]

An alright gun stock.


Our main mod is going to be on the shell not the gun

Tools needed
Hacksaw
Needle nose pliers
Cpvc
1. Take your pliers and remove the middle posts

2. Cut off the end of shell



3. File off end
4. Cut a 2" piece of cpvc

5. Place cpvc in shell, with some e-tap on the end or for a more permient effect put hot glue on the seem

6. Enjoy!


Ranges: About 5- 10 more feet than stock

Edited by man_with_many_guns, 18 November 2005 - 08:19 PM.

[joeyaglr444]

Ya dude Thanks a million it does help range this also works on the Rapid fire lever action.

[man with many guns]

joeyaglr444, on Nov 11 2005, 07:51 PM, said:

Ya dude Thanks a million it does help range this also works on the Rapid fire lever action.

Your welcome. Glad it works for you.

[joeyaglr444]

For the Lever action buzz bee
I am in need of your help though you see ounce the round is fired It travels through the barrel sometimes it clips the edged of the barrel while exiting and makes it spiral out of control anybody up for a challenge Pvc mod anybody?

[man with many guns]

joeyaglr444, on Nov 11 2005, 09:44 PM, said:

For the Lever action buzz bee
I am in need of your help though you see ounce the round is fired It travels through the barrel sometimes it clips the edged of the barrel while exiting and makes it spiral out of control anybody up for a challenge Pvc mod anybody?

You could saw off the orange end. Mine had the same problem, so I sawed of the end. Do you want pics?

Edited by man_with_many_guns, 12 November 2005 - 08:58 AM.

[joeyaglr444]

That was the first thing i did, I removed the orange tip first but do you think the barrel can be replaced? with pvc I mean recently I found a whole Batch of industrial size PVC tubing i found it and now i will never run out but im still trying to figure out how to put in a new barrel.

[NerfMonkey]

*AHEM*

I like your mod the best though; more pictures and more accurate ranges. Nice job.

[man with many guns]

NerfMonkey, on Nov 12 2005, 10:02 AM, said:

*AHEM*

I like your mod the best though; more pictures and more accurate ranges. Nice job.

Thank you! I didn't realize that. His mod though still has the shell ejection, mine doesn't if you use hot glue, it sticks on the end and doesn't eject.

Edited by man_with_many_guns, 12 November 2005 - 05:55 PM.

[NinjZ]

Um....all the pictures show up as NF pictures for me. Not double shot pics.

[The Infinite Shindig]

NinjZ, on Nov 13 2005, 01:29 AM, said:

Um....all the pictures show up as NF pictures for me. Not double shot pics.

That's a good observation. However, I have already seen the pics previously. More than likely he overwrote his double shot pics with his NF pics. Simply renaming the files and uploading the missing pictures should clear everything up.

[man with many guns]

The Infinite Shindig, on Nov 12 2005, 10:53 PM, said:

NinjZ, on Nov 13 2005, 01:29 AM, said:

Um....all the pictures show up as NF pictures for me. Not double shot pics.

That's a good observation. However, I have already seen the pics previously. More than likely he overwrote his double shot pics with his NF pics. Simply renaming the files and uploading the missing pictures should clear everything up.

Yeah, thats what I did, sorry, it'll be a while before I get new pics. Do you know a way to get them back? I deleted the ds pics.

Edited by man_with_many_guns, 13 November 2005 - 10:01 AM.

[The Infinite Shindig]

I would call this a good example of why you should always back up your files. Believe me, you'll appreciate this advice one day.

[man with many guns]

The Infinite Shindig, on Nov 13 2005, 07:07 AM, said:

I would call this a good example of why you should always back up your files. Believe me, you'll appreciate this advice one day.

I will from now on, I just wish I would've sooner.

[Sqiggs89]

NerfMonkey, on Nov 12 2005, 10:02 AM, said:

*AHEM*

I like your mod the best though; more pictures and more accurate ranges. Nice job.

That was when I was thinking if it would work. I hadn't tried it at that time. Then I did and edited the post. I never got around to an actual write-up.

So yours doesn't eject Man_with_many_guns? That sucks but it's a good mod.

[man with many guns]

Sqiggs89, on Nov 13 2005, 09:20 AM, said:

NerfMonkey, on Nov 12 2005, 10:02 AM, said:

*AHEM*

I like your mod the best though; more pictures and more accurate ranges. Nice job.

That was when I was thinking if it would work. I hadn't tried it at that time. Then I did and edited the post. I never got around to an actual write-up.

So yours doesn't eject Man_with_many_guns? That sucks but it's a good mod.

I didn't want it to eject, and thanks. Sorry sbout the pics. Did you see them before they were screwed?

[ambushbug]

joeyaglr444, on Nov 12 2005, 07:20 AM, said:

That was the first thing i did, I removed the orange tip first but do you think the barrel can be replaced? with pvc I mean recently I found a whole Batch of industrial size PVC tubing i found it and now i will never run out but im still trying to figure out how to put in a new barrel.

I also saw off the barrel in the RFR. I'm not sure if you can completely replace the barrel as (if I recall correctly), the barrel and the chamber/ejection spring are all one piece (well, two halves). I imagine you could just jam some material down the existing barrel (depending on the diameter). Though I'm not convinced that a new barrel would make it any better as range is only mediocre and the accuracy depends alot on the dart/shell. Its worth trying though, I believe the halves of that barrel unscrew - so you could easily experiment.

[joeyaglr444]

I DID IT! AHAHAHAH I DID IT I WAS SICK FROM SCHOOL AND I DID IT!

I put Pvc down the barrel and modified the stock darts, i took off the whole purple part except the part that is apart of the dart and put domes of glue on top theyre exceptionally accurate

Edited by joeyaglr444, 15 November 2005 - 05:11 PM.

[DTReaper]

That is good, very good now you need to invent a catch for the ejected shells so you don't have to pick them up off the ground, that would be good.

-DTR

[joeyaglr444]

Done. ijust put a box on the side that thte shellll ejecter feeds into.

[man with many guns]

I fixed the pics.

[hotvietboi123]

I just want to take the plastic sticks inside the shells holding the darts, how do you take them out? I tried everything, nose pliers..etc maybe I'm too weak...


edit: ok nvm, i tried a different pair of pliers, the ones i were using didn't have a good grip (ridges)

Edited by hotvietboi123, 27 November 2005 - 06:56 PM.

[anders]

I modded a shell this way and i can't see any changes in range


very dark pic