[Renegade]

nerfisfun, on Oct 22 2005, 02:41 PM, said:

*snip*

Your barrels look slightly crooked.

Here's a few of my modded guns.





The Rf20's clipmodded also.

This post has been edited by Renegade: 22 October 2005 - 02:56 PM

[nerfisfun]

Renegade, on Oct 22 2005, 02:55 PM, said:

Your barrels look slightly crooked.

It is, it has to be to fit in, I'm working on a scope (Mainly a 1 inch pvc glued on the barrel
here they are: finished, but not dry:
and red one:

This post has been edited by nerfisfun: 22 October 2005 - 05:25 PM

[man_with_many_guns]

Joey, Hammer is right, thats the sm750, and thanks.

At2k with stock attatched:




At2k with stock not attatched:

This post has been edited by man_with_many_guns: 22 October 2005 - 05:46 PM

[Pico10]

NinjZ, on Oct 19 2005, 03:36 PM, said:

CPVC breach modded Crossbow/SM1500 intagration and Crossbow

Nice integretion but the pump should be where the barrelis of the sm1500, and the barrel should come out the top hole where the original Xbow's barrel was.

[BloodMoon]

Quote

Nice integretion but the pump should be where the barrelis of the sm1500, and the barrel should come out the top hole where the original Xbow's barrel was.

Uhh, then where would the crossbow's barrel be??

Here's a pic of my LBB, though I already posted the pic in some other thread:

[NinjZ]

Pico10, on Oct 22 2005, 05:52 PM, said:

Nice integretion but the pump should be where the barrelis of the sm1500, and the barrel should come out the top hole where the original Xbow's barrel was.

1) The tubing isnt long enough to reach without getting in the way of the internals.
2) I like it that way. I had tried a few moc set ups before I settled on that set up. It works much easier for me.

[Peter]

BloodMoon, on Oct 22 2005, 07:22 PM, said:

Quote

Nice integretion but the pump should be where the barrelis of the sm1500, and the barrel should come out the top hole where the original Xbow's barrel was.

Uhh, then where would the crossbow's barrel be??

Here's a pic of my LBB, though I already posted the pic in some other thread:
<snipsnipfunfun>

[SirTofu]

Here's My little collection:

This post has been edited by SirTofu: 23 October 2005 - 01:41 PM

[Peter]

Do you get better ranges with the at2k's with longer barrels SirTofu?

[SirTofu]

I believe I do. I havent really tested it, though.

[AirApache]

Haha, sorry, I didn't know this topic was going to be made into a sticky when I posted that.

But to redeem myself, I'll put two of mine up. All the rest of my guns have identical modifications to every other mod of the gun, except these two, which is why I guess I'm posting them. Enjoy.


7 inches, with 6 inch sch80PVC and 7 inches of 9/16" brass nested with two inches of 17/32" brass.


A closeup.


NiteFinder. 4 inches 9/16" brass, ppk modification and coated with gun-metal black.

AA

[Lukeinator]

What are the ranges like with nested brass on your SM1.5k Air Apache?

[Pico10]

I only have the latest guns so I'll show my favorite so far:
http://img20.imagesh...s24002980fm.jpg
An NF with a ammo holder relocation and a barrel replacement.

[man_with_many_guns]

Pico10, on Oct 24 2005, 01:08 PM, said:

[img]http://http://img20.imageshack.us/img20/4451/s24002980fm.jpg[/img]
*snip*

What is that thing where the ammo holder use to be?

This post has been edited by man_with_many_guns: 24 October 2005 - 02:25 PM

[AirApache]

Haven't tested them yet. I know that before I rebarreled it (I had done Cx's original mod), it was achieving the predicted 80-90 feet at best. I'm predicting that I'll get maybe a 5-10 foot increase, and that the initial velocity will be much more satisfying because of the nested brass. I'll test it out when I make my next batch of darts.