Help
I think I'm posting this in the correct place. If not, let me know so I can move it to where it belongs.
side 1
side 2
the front view(ish)
This post has been edited by noodlenoggin: 31 January 2012 - 05:48 PM
Modification and Paintjob Pictures POST PICTURES ONLY. How hard is that.
#3931
noodlenoggin 
- Member
- Group: FNGs
- Posts: 2
- Joined: 11-January 12
- Location:New Jersey
- Country:United States
- State:NULL (No Answer)
Posted 31 January 2012 - 12:30 PM
This is my first post and first attempt at painting one of my Nerf blasters. I went for a simple army style with my longshot front gun.
I think I'm posting this in the correct place. If not, let me know so I can move it to where it belongs.
side 1
side 2
the front view(ish)
I think I'm posting this in the correct place. If not, let me know so I can move it to where it belongs.
side 1
side 2
the front view(ish)
just monkeying around
#3933
Eik
- Member
- Group: Members
- Posts: 76
- Joined: 22-February 10
- Location:Minneapolis, MN
- Country:United States
- State:Minnesota
Posted 31 January 2012 - 10:16 PM
Finished my "Nomad" NF
- CPVC coupler
- 'iamthatcat'-style Jolt integration
- SSPB in the handle
- Tactical stickers
Probably gonna repaint it something cooler
- CPVC coupler
- 'iamthatcat'-style Jolt integration
- SSPB in the handle
- Tactical stickers
Probably gonna repaint it something cooler
Draconis, on 03 May 2011 - 09:08 PM, said:
That seems like substantially less fun than filling it with beer.
PM me to paint your blaster!
Some work
#3934
Ambience 327
- Member
- Group: Members
- Posts: 471
- Joined: 18-April 07
- Location:Fort Wayne, IN
- Country:United States
- State:Indiana
Posted 01 February 2012 - 07:02 AM
Here is my modded Buzzbee Flintlock:
The write-up can be found right here.
Cost: $10.88 ($8.99 blaster, $1.54 springs, $0.25, $0.10 worth of Goop)
Time: Roughly 1.5 hours
Stock Ranges: 17'-22' (19' average)
Mods Done:
barrel replacement (CPVC endcap "coupler" for CPVC speed loaders)
spring addition
catch spring replacement
Modded Ranges:
Stock Darts: 25'-30' (27' average)
Slug Darts: 30'-35' (32' average)
The write-up can be found right here.
Cost: $10.88 ($8.99 blaster, $1.54 springs, $0.25, $0.10 worth of Goop)
Time: Roughly 1.5 hours
Stock Ranges: 17'-22' (19' average)
Mods Done:
barrel replacement (CPVC endcap "coupler" for CPVC speed loaders)
spring addition
catch spring replacement
Modded Ranges:
Stock Darts: 25'-30' (27' average)
Slug Darts: 30'-35' (32' average)
Foam in the Fort II
The second exciting Nerf War in Fort Wayne, IN
Saturday, August 28th, 2010
(FREE NERF SWAG! See thread for details!!!)
The second exciting Nerf War in Fort Wayne, IN
Saturday, August 28th, 2010
(FREE NERF SWAG! See thread for details!!!)
#3936
Eik
- Member
- Group: Members
- Posts: 76
- Joined: 22-February 10
- Location:Minneapolis, MN
- Country:United States
- State:Minnesota
Posted 01 February 2012 - 05:12 PM
Batch of Reflex's/Eliminator for xmas gifts
Painted the internals of my Red+Clear Maverick
Tuned up my Recon
Painted the internals of my Red+Clear Maverick
Tuned up my Recon
Draconis, on 03 May 2011 - 09:08 PM, said:
That seems like substantially less fun than filling it with beer.
PM me to paint your blaster!
Some work
#3937
TagMaster247
Posted 02 February 2012 - 10:51 AM
Enjoy!!!
This post has been edited by TagMaster247: 02 February 2012 - 06:17 PM
Want a cool paintjob or some awesome Slugs or dome darts? PM me for quotes!
#3938
ilikefish58
Posted 02 February 2012 - 05:28 PM
20:01 Talio I wish I could punch this conversation in the face
#3939
Eraser475
- Member
- Group: Members
- Posts: 62
- Joined: 17-May 11
- Location:Echo, Mn
- Country:United States
- State:Minnesota
Posted 03 February 2012 - 06:00 PM
What my nitefinder...
...looks like under a blacklight:
...looks like under a blacklight:
"That seems like substantially less fun than filling it with beer". -Draconis
"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo
"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.
"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo
"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.
#3940
iamthatcat
Posted 07 February 2012 - 07:42 PM
5 shot Jolt. It uses a light .8", looser fitting dart. It loads from the front. The 5th shot is a stroke of luck that worked when I tried shoving an extra (tight fitting) dart down the barrel. Ranges are 35',32',25',20' & 10' over grass (stock spring).
The nano is more consistent. My best, last shot (Rogue spring) landed at 24'.
Early pic of the wye.
Jolt tweaks.
A start on the sights for a Tek 3 turret. The curve added to the back of the turret allows you to prime with the o-ring exposed a bit, to get a better gulp of air & better range. The missile adapter is a piece of polyester(?). It was packing materials. The skeletonized trigger & barrel crenelation helps with aim.
This shows the removal of the stock back plate. It's slimmer & can be useful for integrations. Clear orange vinyl tubing & a shoelace for priming. Shaped up coupler. The small front profile/trigger is nice in the hand.
Turreted NF. Seal needs work.
The nano is more consistent. My best, last shot (Rogue spring) landed at 24'.
Early pic of the wye.
Jolt tweaks.
A start on the sights for a Tek 3 turret. The curve added to the back of the turret allows you to prime with the o-ring exposed a bit, to get a better gulp of air & better range. The missile adapter is a piece of polyester(?). It was packing materials. The skeletonized trigger & barrel crenelation helps with aim.
This shows the removal of the stock back plate. It's slimmer & can be useful for integrations. Clear orange vinyl tubing & a shoelace for priming. Shaped up coupler. The small front profile/trigger is nice in the hand.
Turreted NF. Seal needs work.
This post has been edited by iamthatcat: 15 February 2012 - 05:09 PM
#3941
andtheherois
- Member
- Group: Members
- Posts: 346
- Joined: 13-December 10
- Location:North Brunswick 08902
- Country:United States
- State:New Jersey
Posted 11 February 2012 - 03:51 PM
Berserker for a friend
Semi-auto Salvo for Hoongfu
Twins, One's not so pretty cause the coupler was done by someone else and replaced by me. The other one was 100% stock when I received it, and was quickly modded for a Keo.
Two Double Shots I did for a friend for a Zombie walk. They're in my possession once again to be minimized further. A lot of work went into detailing them and making them look worn and used.
Semi-auto Salvo for Hoongfu
Twins, One's not so pretty cause the coupler was done by someone else and replaced by me. The other one was 100% stock when I received it, and was quickly modded for a Keo.
Two Double Shots I did for a friend for a Zombie walk. They're in my possession once again to be minimized further. A lot of work went into detailing them and making them look worn and used.
Oh look, I have a Youtube channel - http://www.youtube.c...er/Andtheherois
#3942
ilikefish58
Posted 13 February 2012 - 01:11 PM
20:01 Talio I wish I could punch this conversation in the face
#3943
thespankerlives
Posted 13 February 2012 - 07:47 PM
This post has been edited by thespankerlives: 13 February 2012 - 07:48 PM
#3944
Eik
- Member
- Group: Members
- Posts: 76
- Joined: 22-February 10
- Location:Minneapolis, MN
- Country:United States
- State:Minnesota
Posted 16 February 2012 - 09:59 PM
Work in progress. Might make a write-up when it's complete.
Draconis, on 03 May 2011 - 09:08 PM, said:
That seems like substantially less fun than filling it with beer.
PM me to paint your blaster!
Some work
