Homemades Picture Thread Photos of Homemade Nerf Guns
Posted 05 March 2012 - 01:52 PM
It is very sturdy for being just gooped together.
"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo
"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.
Posted 05 March 2012 - 05:32 PM
One with a +bow catch, one with a rainbow catch. They both perform the same, but the Rainbow one was much easier to build. The one with blue bow arms is going to Keo, The other is mine. Each have 7.5 inches of draw.
Also made a Tornadobow X/2 a while ago:
DCNF 3 participants know how much I like my +bow...
Added a Thumbhole stock to this bad boy.
Posted 10 March 2012 - 10:07 AM
Tubes in tubes in tubes, man!
(This was when I was looking for a zip-tie to hold the tubing. I could not find one because this place is a disaster. However, drilling holes worked!)
Even with a disaster of a plunger head (fuck you Kane), three inches of draw (fuck you Ice9), and other weird, assorted problems, it shoots out of a hopper okay.
The end goal is to make a real gun that drops all the spring bullshit and compression distance out to make things more wieldy.
Gonna call it the TOUCH MY DANGUS blaster. Everyone else has to call it that, too.
MORE IMPORTANTLY IT'S THE FIRST ONE LIKE THIS, EDWARDS.
Mod party video!
This post has been edited by Ice Nine: 10 March 2012 - 08:57 PM
Posted 10 March 2012 - 04:19 PM
Slotted Plunger Rod:
Fully compressed k18 gives it great range and a light draw weight:
Money in the bank:
PA POWER Clan Is that all ya got?
Posted 14 March 2012 - 04:59 PM
Super comfy and easy to pump. Both the EPVAT and pump are held on with copious amounts of hotglue, with zipties for the pump as well. Also, yes, I did spell Chimaera different on purpose. 1 cookie for whoever guesses the difference in the spellings. As for ranges, gets over 250' with a 2' CPVC barrel and double bb stefans, and makes single bb hotglue dome stefans spin out at 70' with the same barrel. With a 7-shot absolver, gets around 70' with a 8'-10' spread. With my long 3-shot absolver, gets 100' with 5'-7' of spread. With my 19-shot absolver, gets 50'-60' with about 15' of spread.
This post has been edited by Nurf Doctor: 14 March 2012 - 05:01 PM
Look for Bacon on MW3 Wii
Posted 15 March 2012 - 04:35 AM
-Internally seated bushing
-Cherry thumb-hole stock
-Lowered priming handle
-Single piece side plates
-Nearly every part has been modified from the original design
Soon to come:
-Square aluminum priming rod
-Custom cherry & birch case
Please excuse my terrible pictures. I only have acess to a low quality camera. I will try to upload higher quality pictures in the future.
This post has been edited by Craftsman: 15 March 2012 - 04:39 AM
It's all shits and giggles, until somebody giggles and shits.
Posted 21 March 2012 - 09:41 PM
I took bits of the PAPbow by Lt. Stefan and Ryan's Pumpbow that I liked best.
Mad props to Lt. Stefan for the catch and supa' comfy handle.
Uses 1 piece side plates and aluminum bar/UHMW priming system.
shoots a million feet.
*edit to avoid double-post*
Re-visited some old +bow related projects:
Split's +pistol design I made quite a while ago
Made a new comfy handle for my +bow
This post has been edited by alugilaC: 23 March 2012 - 05:22 PM
Posted 27 March 2012 - 01:19 PM
Multiple catch points.
Posted 02 April 2012 - 09:46 PM
PumpSNAP with Raider furniture and 18 inch ported CPVC barrel.
Hits full compression with a full k26, 7 inches of draw.
Here's the SNAPbow:
Wood thumb-hole stock and painted.
And finally an AaBow:
For those mainstream Nerfers that are wondering about the ball valve, it's supa-low resistance, Swiss-made. You've probably never heard of them.
This post has been edited by Xellah: 02 April 2012 - 09:52 PM
Member of P.O.O.N.
Posted 14 April 2012 - 07:33 PM
My new Pumpbow,
Too many thumb holes, so I'm gonna try something different.