NerfHaven: Maverick Internals - NerfHaven

Jump to content

  • 3 Pages +
  • 1
  • 2
  • 3
  • You cannot start a new topic
  • You cannot reply to this topic

Maverick Internals

#1 User is offline   LiKnSmAkScOmIn 

  • Member
  • Group: Members
  • Posts: 292
  • Joined: 20-April 03

Posted 02 January 2005 - 01:18 AM

Sorry for the bad quality, I had to get these off my camera phone.
Posted Image
Posted Image

The 6 barreled piece is held by 2 orange plastic pieces connected by a metal rod, after unscrewing the 6 screws on the top and bottom of the cylinder you can go ahead and pull the two parts apart to get rid of the poles.
Posted Image
In the stubs seen there, it looks like 9/16" brass might fit inside if you sand a little bit.

Hope this helps.
Morons With Guns own you.

#2 User is offline   mayhem 

  • Member
  • Group: Members
  • Posts: 99
  • Joined: 13-September 04

Posted 02 January 2005 - 05:03 AM

Cool, I was wondering what the internals were like.

#3 User is offline   Nerfdude 

  • Member
  • Group: Members
  • Posts: 55
  • Joined: 06-January 04
  • Location:STL

Posted 02 January 2005 - 08:28 AM

aside from that grotesque color scheme, this is definitely the coolest sidearm nerf has brought out in a while... gonna go get one today. and paint it black.
-Nerfdude Classic

#4 User is offline   Spectre2689 

  • Member
  • Group: Members
  • Posts: 432
  • Joined: 10-December 03
  • Location:Toronto

Posted 02 January 2005 - 09:07 AM

How easy or hard do you figure it would be to modify the gun to have the revolving dealy (forgot the name) come out farther, so a quick-loader sort of deal could be used?
Spectre of the CFM

#5 User is offline   xedice 

  • Member
  • Group: Members
  • Posts: 306
  • Joined: 14-February 03

Posted 02 January 2005 - 09:18 AM

Why did they ever even consider this 'reverse plunger' method... so lame.
The gun is nice though.
Shmokin' weed, Shmokin' wizz
Doin' coke, drinkin' beers, Drinkin' beers beers beers
Rollin' fatties, Smokin' blunts
Who smokes the blunts? We smoke the blunts
-Jay

#6 User is offline   TheHaze 

  • Member
  • Group: Members
  • Posts: 192
  • Joined: 18-July 03

Posted 02 January 2005 - 10:26 AM

xedice, on Jan 2 2005, 11:18 AM, said:

Why did they ever even consider this 'reverse plunger' method... so lame.

No kidding, Is the plunger any bigger then the scouts? I hope so because it's already goign to lose air from the rotating.
When you die, if you get a choice between going to regular heaven or pie heaven, choose pie heaven. It might be a trick, but if it's not, mmmmmmm, boy

#7 User is offline   LiKnSmAkScOmIn 

  • Member
  • Group: Members
  • Posts: 292
  • Joined: 20-April 03

Posted 02 January 2005 - 11:32 AM

For a quickloader, It could be possible that those 2 gray pegs you see under the firing cylinder could be cut off though you might have to figure out some way for the gray pieces on the front and back of the cylinder to stay firm onto the gun until you detach.

EDIT: By quickloader, did you mean a piece that loads 6 darts into the cylinder at once? You won't be able to do that since the grey plate on the front of the cylinder which holds it to the gun will block some barrels. To get it out futher, I think you might be able to sand some ridges on the grey plates which limit how far it slides out.

Spring is about 2-3 inches long.
Also, this gun cannot fire from the titan by pressing the button like the scout.

Im not planning on messing around with mine too much since my parents won't buy another if this breaks. I'm a bit concerned since the barrels dont seem very airtight due to the fact that theyre in 2 parts and the top barrels are a little bit loose. Crayolas might work well for this gun since the plunger design is going to make it as useful with brass as a scout.

This post has been edited by LiKnSmAkScOmIn!: 02 January 2005 - 01:24 PM

Morons With Guns own you.

#8 User is offline   MattPaintballer 

  • Member
  • Group: Members
  • Posts: 369
  • Joined: 22-October 04
  • Location:Where the slots are plentiful, and the yards are small

Posted 02 January 2005 - 01:44 PM

xedice, on Jan 2 2005, 09:18 AM, said:

Why did they ever even consider this 'reverse plunger' method... so lame.

What exactly do you mean?
"I think politicians are much more irritating than hippies."
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.

#9 User is offline   okto 

  • Member
  • Group: Members
  • Posts: 590
  • Joined: 14-April 04
  • Location:tulsa OK/fort worth TX

Posted 02 January 2005 - 02:26 PM

The cylinder moves, instead of a piston.

#10 User is offline   MattPaintballer 

  • Member
  • Group: Members
  • Posts: 369
  • Joined: 22-October 04
  • Location:Where the slots are plentiful, and the yards are small

Posted 02 January 2005 - 02:58 PM

I still don't understand...
"I think politicians are much more irritating than hippies."
"the56ace,
Your member account at NerfHaven has been temporarily suspended because I don't like you."
-cxwq
If ignorance is bliss, our president must be ecstatic.

#11 User is offline   THIRST 

  • Member
  • Group: Members
  • Posts: 1,098
  • Joined: 28-June 03

Posted 02 January 2005 - 03:18 PM

When you cock the gun, the plunger tube moves back. The plunger rod is actually the barrel, with a hole in the plunger head...When the plunger tube goes forward, the air is pushed through the whole, since the plunger head is airtight...just look at the scout picture internals if you dont understand.

I like the design. Its more air efficient, and requires little/no reinforcement. The only problem is that it would be impossible to implement the design into a rifle...it would be way too big.

THIRST
ko

#12 User is offline   LiKnSmAkScOmIn 

  • Member
  • Group: Members
  • Posts: 292
  • Joined: 20-April 03

Posted 02 January 2005 - 03:40 PM

Posted Image
Crude paint drawing but it works.

The dark red is the plunger tube and the red is the plunger. When you pull the cocking slide on the outside of the gun back, it pulls the plunger tube.The bottom picture is what it looks like cocked, and the blue stuff inside is air. When you pull the trigger, the tube moves forward and pushes the air through the hole in the plunger, which goes out the barrel.

I think they used this design because it's easier to use that with the slide cocking system.

This post has been edited by LiKnSmAkScOmIn!: 02 January 2005 - 03:41 PM

Morons With Guns own you.

#13 User is offline   Techno-Dann 

  • Member
  • Group: Members
  • Posts: 120
  • Joined: 17-December 03
  • Location:Seattle Area

Posted 02 January 2005 - 07:26 PM

Cool pics. T-D happy now. ^_^

Think you could wedge an NF plunger and tube into it? It'd rock if you could.
Do not mess with CXWQ, for he has Admin powers and will bann your flaming little a**.

Techno-Dann of the Seattle Tactical Nerf Team

#14 User is offline   AirApache 

  • Member
  • Group: Members
  • Posts: 743
  • Joined: 15-March 04
  • Location:Milwaukee, Wisconsin, USA

Posted 02 January 2005 - 07:52 PM

The spring looks less powerful than the NF spring...

Those are some pretty sweet graphics for a camera phone.

I get the feeling they did the whole reverse plunger thingy just to say that they did.

I prolly won't invest in this thing unless it gets +50 feet consistently. Good luck.

AA
Indiana '11

#15 User is offline   ompa 

  • Introductinator
  • Group: Contributors
  • Posts: 2,331
  • Joined: 11-March 04
  • Location:Baltimore, MD

Posted 02 January 2005 - 07:57 PM

Falcon (I think?) reports ranges of 58' out of his modded on NHQ.

~ompa
"I love that the french are always starting trouble, but never have the balls to finish it. I mean, it must be pretty disheartening to be globally accepted as the most useless nationality on the planet. Seriously though, I'm really sorry you're french.

VACC"

Share this topic:


  • 3 Pages +
  • 1
  • 2
  • 3
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users