11 replies to this topic

[AwesomelyNerf]

Hi guys! This is my second mod guide,and I'm trying a different format. Text in the pictures. If you have feedback regarding this format,do tell me.
You can check out my overview video of this blaster here .

Mod at your own risk!


Internals Overview of the blaster. The trigger lock has already been taken out. It was originally located at the middle portion of the blaster.


After you have taken out the lock, you can take out the plunger assembly. This includes the plunger tube,breech, plunger head,and spring.



Replace the stock spring with a stronger spring. I used the Black Tactical v2 Retalitor spring.











Hope you guys find this guide useful. If you have any questions,I'll try my best to answer them.

[SolarFusion]

Looks awesome, great write-up.


I have a few questions;

What are the ranges like in stock form as well as modded?

How does that freaky holster/stock/freakytwistofplastic work? Is it functional or just a gimmick?

And lastly, how can you bee so cruel as to tease us like this?

Edited by SolarFusion, 15 December 2014 - 09:04 AM.

[XCS2]

Nice writeup. Very clear. Just wondering, how do you load/fire it? Is it like some sort of break barrel or is it a front loader?

[Draconis]

Don't these breach load? Removing the locks, adding a stronger spring and a brass barrel seems like an /awesome/ method of removing excess fingers.

[Bro Juice]

Now paint it like a nintendo zapper.

[SolarFusion]

'Bro Juice', on 16 Dec 2014 - 12:12 AM, said:

Now paint it like a nintendo zapper.

That would be some wicked nostalgia.

[AwesomelyNerf]

'SolarFusion', on 15 Dec 2014 - 2:04 PM, said:

Looks awesome, great write-up.


I have a few questions;

What are the ranges like in stock form as well as modded?

How does that freaky holster/stock/freakytwistofplastic work? Is it functional or just a gimmick?

And lastly, how can you bee so cruel as to tease us like this?

Thanks!
Q1)Definitely better.I'd say probably more or less the same as a spring replaced Retaliator. But I have yet to bring this for a test So I can't confirm.
Q2)You can watch a demo here,by another Singaporean Nerfer.Skip to 2:10 where he draws the blaster out of the holster.It works only if you place the holster super tight onto your pants/belt.
Q3)Cause I can!

[AwesomelyNerf]

XCS2 question:Breech loader.But you can load it from the front too.

Draconis question: Yes this breech loads. But the space is too small so you'd need to manually push the dart into barrel a little.Removing the trigger lock has its ups and downs.It allows you to deprime the blaster(Which is helpful since this blater is modded).But at the same time,might slam the breech forward if you accidentally pull the trigger when its half primed.

Edited by AwesomelyNerf, 16 December 2014 - 07:22 AM.

[Draconis]

'AwesomelyNerf', on 16 Dec 2014 - 12:18 PM, said:

XCS2 question:Breech loader.But you can load it from the front too.

Draconis question: Yes this breech loads. But the space is too small so you'd need to manually push the dart into barrel a little.Removing the trigger lock has its ups and downs.It allows you to deprime the blaster(Which is helpful since this blater is modded).But at the same time,might slam the breech forward if you accidentally pull the trigger when its half primed.

So we are agreed then, if you happen to be loading a dart and the catch fails, you WILL be injured.

[deathturtle]

Sounds like cpvc would be a smart choice.

[SolarFusion]

'Draconis', on 17 Dec 2014 - 10:25 PM, said:

So we are agreed then, if you happen to be loading a dart and the catch fails, you WILL be injured.

Lol, brass slamming forward. Yeah, that might leave a mark, or take say...a finger tip.

With breech loading that sounds like a low ROF for a probably not overly powerful blaster compared to a singled LS.

[AwesomelyNerf]

'Draconis', on 17 Dec 2014 - 10:25 PM, said:

So we are agreed then, if you happen to be loading a dart and the catch fails, you WILL be injured.

Well,I never mentioned that it wouldn't, if the catch fails. But that's what locks are for-to protect the user. If the user wants to remove it,he can.If he doesn't,then don't.