NerfHaven: Snap Carbine with k26 - NerfHaven

Jump to content

  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

Snap Carbine with k26

#1 User is offline   Dremz3 

  • Member
  • Group: Members
  • Posts: 15
  • Joined: 20-March 12
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 31 March 2012 - 08:59 PM

After revising Ace's snap carbine, and seeing NOM's version, I decided to make one. However, I only had k26 springs with me, so I made a snap carbine with a k26. Plus, I believe k26 springs are more powerful.
Here is the finished product:
Posted Image

In order to add a full 11 in k26 with a 4 in compression, I had to make the carbine pretty long. I actually made two, because the first one did not have a 7 in draw. The piston is longer, and in order for the nail to ride along the piston i had to make the pvc continue on the piston.

Posted Image

I also made 1/2 in cpvc pegs for the k26 to wrap on so that it does not fly everywhere.

Posted Image

The stock also has a peg:

Posted Image

Posted Image

Posted Image

Blaster primed:

Posted Image

Another picture of the entire blaster:

Posted Image

Overall, if you have a k26 and want to make a snap carbine, you can. I'm getting 100 ft flat with stefans, and 130 ft - 150 ft angled. The only problem I have with snaps in general, is clothespin triggers. They are too weak to hold a k26, full compression. Other than that, snap carbines are fun to make! (By the way this is my first post, yet I would love to answer any questions you have)

#2 User is offline   Siarnaq 

  • Member
  • Group: Members
  • Posts: 11
  • Joined: 18-March 12
  • Country:United States
  • State:Oklahoma

Posted 01 April 2012 - 04:59 AM

 Dremz3, on 31 March 2012 - 08:59 PM, said:

The only problem I have with snaps in general, is clothespin triggers. They are too weak to hold a k26, full compression.


That's a problem with your trigger in particular, not the design of the CPT itself. They are a pain to get right though. Actually, I have heard of troubles with this in the Snap Carbine where they didn't occur in a normal SnapBow, so maybe using a k26 actually was just too much for that clothespin.

I've been wondering recently why Snap Carbines didn't just use a k26 in the first place and have a dowel for the priming handle screwed onto the piston without sticking it through. You could then nest the k26 inside the piston. It would allow for the whole thing to be much shorter. There may be something I'm missing though.

EDIT: I'm curious, what is it you did with the threaded fittings on the barrel?

EDIT2: Sorry, I was apparently being unclear- I meant fastening the priming handle so that it was not sticking through the piston, similarly to how the main handle is usually attached to a RainBow.

This post has been edited by Siarnaq: 01 April 2012 - 07:11 AM


#3 User is offline   Dremz3 

  • Member
  • Group: Members
  • Posts: 15
  • Joined: 20-March 12
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 01 April 2012 - 06:47 AM

That is probably true, and part of it is because I can't seem to find any strong clothespins any where, so both my snap bow and my snap carbine are hard to catch. I had to attach a catch spring to the trigger to make it catch a little.
The one reason I can think of why people don't use that method, is because the priming handle is placed inside the piston and thus it would get in the way of the k26.
If your asking about the pegs, then the piston itself is 1 in pvc, then 3/4 in pvc, then 1/2 in pvc, and finally 1/2 in cpvc. I had to dremel out the middle of each to fit inside each other.

#4 User is offline   Spud Spudoni 

  • Member
  • Group: Members
  • Posts: 168
  • Joined: 07-April 09
  • Location:SOUTH CAKALAKY

Posted 01 April 2012 - 09:20 AM

Damn! You beat me to it! I was about to try a K26 spring in a Carbine, but it seems you arleady achieved that. Well done. As for as the spring itself, I see it bending the PVC at some point, or over time. The spring may then fly out pf the PC, and hit you, or damage the blaster. I would suggest putting some sort of PVC, or cover on the bolt slot to eliminate this.
As far as the trigger, it may be because your nail is too long, your clothespin is cut too short, or yes, the clothespin may not be strong enough to support the spring. Wal-Mart has a big pack of hefty plastic clothespins that are slightly bigger. This may help you, and with a little E-Putty, your blaster should preform better.
Hope to see more of your work soon.
Spud Spudoni, The Italian Potato.

AKA DREMEL

A quote from Daniel Beaver... "And the genocide of the FNG's began."

#5 User is offline   hamoidar 

  • Member
  • Group: Members
  • Posts: 364
  • Joined: 06-October 11
  • Country:United States
  • State:NULL (No Answer)

Posted 01 April 2012 - 10:25 AM

Problems with your trigger: One, you need something stronger than hot-glue to hold it on. Two, as Spud said, you need to get a plastic clothespin. Three, in your pictures, it looks as though you nail/catch is leaning forward. This is most likely caused by the high-powered spring making the nail dig into the pvc. A good fix would be to use a small piece of copper tubing, with the nail nested inside, to act a a sort of bearing surface for the catch pin. Sort of like Boltsnipers FAR, were he uses brass tubing. (boltsniper)
NerfHaven > Your control panel > Profile > Change Signature > Inserts dumb sig > What! No pictures! > Inserts next best thing: Best thing on Nerfhaven!

#6 User is offline   Siarnaq 

  • Member
  • Group: Members
  • Posts: 11
  • Joined: 18-March 12
  • Country:United States
  • State:Oklahoma

Posted 01 April 2012 - 10:53 AM

 hamoidar, on 01 April 2012 - 10:25 AM, said:

One, you need something stronger than hot-glue to hold it on.

Two, as Spud said, you need to get a plastic clothespin.

Three, in your pictures, it looks as though you nail/catch is leaning forward.



1. Hotglue holds just fine, although a ziptie definitely helps.

2. Lots of people still use wooden clothespins for their Snaps- Louiec3 and Carbon are two. They're super annoying to drill through though.

3. With wooden clothespins, this can be a problem. Carbon explains here. This is probably the problem he's having with his triggers. Stronger clothespins are far more forgiving in this area.

Edit blatantly avoiding the FNG post limit: Hot glue is okay for holding on a CPT- It's not going to be exposed to much force. A ziptie really helps though. Also, I never said that wooden clothespins were better- they definitely aren't. I was just saying that they will work if you don't have plastic ones.

This post has been edited by Siarnaq: 01 April 2012 - 01:33 PM


#7 User is offline   hamoidar 

  • Member
  • Group: Members
  • Posts: 364
  • Joined: 06-October 11
  • Country:United States
  • State:NULL (No Answer)

Posted 01 April 2012 - 12:29 PM

 Siarnaq, on 01 April 2012 - 10:53 AM, said:

1. Hotglue holds just fine, although a ziptie definitely helps.

2. Lots of people still use wooden clothespins for their Snaps- Louiec3 and Carbon are two. They're super annoying to drill through though.

3. With wooden clothespins, this can be a problem. Carbon explains here. This is probably the problem he's having with his triggers. Stronger clothespins are far more forgiving in this area.

Hot glue does not hold "just fine" It cannot stand up to repeated shock, or fluctuating heat. Just because people still use wooden clothespins doesn't mean they are better than plastic ones. Wood is prone to splitting, whereas plastic is not.
NerfHaven > Your control panel > Profile > Change Signature > Inserts dumb sig > What! No pictures! > Inserts next best thing: Best thing on Nerfhaven!

#8 User is offline   Carbon 

  • Contriberator
  • Group: Moderators
  • Posts: 1,857
  • Joined: 25-January 06
  • Location:New Berlin, WI
  • Country:United States
  • State:Wisconsin

Posted 01 April 2012 - 02:15 PM

 Dremz3, on 31 March 2012 - 08:59 PM, said:

The only problem I have with snaps in general, is clothespin triggers. They are too weak to hold a k26, full compression.

The clothespin does zero work in resisting the force of the plunger. It's all done by the nail and the wall of the plunger tube.

 hamoidar, on 01 April 2012 - 12:29 PM, said:

Just because people still use wooden clothespins doesn't mean they are better than plastic ones. Wood is prone to splitting, whereas plastic is not.

And plastic isn't any better than wood. Personally, I've never had a wooden clothespin split, and I find them easier to machine...I've switched back to wood after using plastic for a few years.

Really, it makes no difference, and comes down to personal building preference.
Hello. I am Indigo of the Rainbow Clan. You Nerfed my father. Prepare to die.

#9 User is offline   hamoidar 

  • Member
  • Group: Members
  • Posts: 364
  • Joined: 06-October 11
  • Country:United States
  • State:NULL (No Answer)

Posted 01 April 2012 - 03:11 PM

 Carbon, on 01 April 2012 - 02:15 PM, said:

The clothespin does zero work in resisting the force of the plunger. It's all done by the nail and the wall of the plunger tube.

Exactly, both of those have limited wear resistance and will eventually break. Of course, everything in any gun will, eventually, break. I personally favor SGnerf's PVC rainbow catch, which I have used for years, and have never had a problem.
NerfHaven > Your control panel > Profile > Change Signature > Inserts dumb sig > What! No pictures! > Inserts next best thing: Best thing on Nerfhaven!

#10 User is offline   Curly 

  • Member
  • Group: Members
  • Posts: 191
  • Joined: 17-May 11
  • Country:Canada
  • State:Ontario

Posted 01 April 2012 - 03:28 PM

Personally I've had terrible luck finding clothespins made of anything that have strong springs and are durable, even with e-putty filling. So I bought a pack of large clothespins with good springs and make the CPT out of plastic sheets like Ice recommended in a video. I only have acrylic but polycarb is much better.

I used a pump-SNAP with one and it broke after several rounds of being awesome. The reason was 100% user error because I shaved off far to much material to make room for the end of the spring so I was putting all that pressure on >1/8" of material. Further confirming what Carbon said, the blaster stayed primed when the trigger broke, leaving only the nail. Even if Ice's technique is doomed to fail, I can make 2-3 of these in the time it takes to mod a plastic clothespin and for cheaper. Due to the large size of the clothespins I bought I could easily stack two layers of plastic to make it near immortal.

Also, because homemade clothespins are very simple they're great candidates for epoxy casting, though the durability is probably similar to polycarbonate.

#11 User is offline   Carbon 

  • Contriberator
  • Group: Moderators
  • Posts: 1,857
  • Joined: 25-January 06
  • Location:New Berlin, WI
  • Country:United States
  • State:Wisconsin

Posted 01 April 2012 - 06:55 PM

 hamoidar, on 01 April 2012 - 03:11 PM, said:

Exactly, both of those have limited wear resistance and will eventually break.

And eventually the Sun will supernova, but it's not a circumstance you really have to worry about. A standard SNAPbow is built around a K26, and the plunger head will wear out way before the nail and nail hole will. A CPT can handle a K26 just fine, it just takes some dialing in.

This post has been edited by Carbon: 01 April 2012 - 06:57 PM

Hello. I am Indigo of the Rainbow Clan. You Nerfed my father. Prepare to die.

#12 User is offline   Pause 

  • Member
  • Group: Members
  • Posts: 107
  • Joined: 01-October 11
  • Location:Honolulu, Hawaii
  • Country:United States
  • State:Hawaii

Posted 01 April 2012 - 07:42 PM

Anyways, back to the mod homemade.

I really like this version of the Carbine Dremz. Especially the stock.
My question is, how long is the blaster? Counting the barrel.

This post has been edited by Pause: 02 April 2012 - 02:08 PM

-Pause-

http://nerfpause.blogspot.com/

View PostDaniel Beaver, on 24 October 2012 - 10:56 AM, said:

Heh.

USER WAS BLAND IN THIS POST

#13 User is offline   Zorns Lemma 

  • Sir Scrt
  • Group: Moderators
  • Posts: 1,192
  • Joined: 11-December 08
  • Location:Chicago, IL
  • Country:United States
  • State:Illinois

Posted 02 April 2012 - 11:41 AM

Having a large exposed section of buckling spring seems like the perfect design for the average end user here.

I support your eugenics project.
"In short, the same knowledge that underlies the ability to produce correct judgement is also the knowledge that underlies the ability to recognize correct judgement. To lack the former is to be deficient in the latter."
Kruger and Dunning (1999)

#14 User is offline   Dremz3 

  • Member
  • Group: Members
  • Posts: 15
  • Joined: 20-March 12
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 02 April 2012 - 12:38 PM

Sorry I couldn't answer any questions yesterday, I'm stuck with this two post limit.
Siarnaq:
I can't think of a way to fasten the priming handle to the piston without making it go through the piston, because it would be much less sturdy.
Spud:
This gun was just for fun so I'm not going to use it very often, therefore I don't think the pvc will bend and the k26 will fly out. However, a plate over it would never be a bad idea.

As for my trigger:
It is a standard clothespin trigger with bamboo wood which i find to be much stronger than regular wood clothespins. The reason it is not a plastic clothespin is because I cannot find plastic ones sold anywhere. If I had one, I would definitely use it. The trigger is screwed in with two screws into the pvc and also has hot glue on the outside. The clothespin spring was too weak, and the piston would push the nail back out of the piston hole, so I added a catch spring which is nailed in and hot glued. Overall, there is no problem with the way I made my trigger other than that if you look at the first pic, you will notice that it is slanted to the left and that is because the handle and the stock are actually slanted, not the trigger (I made a mistake putting them on). This however is not the reason my trigger does not catch.

Pause:
The petg barrel is 12 inches long. The entire gun including the barrel is 40 1/2 inches.

Zorn:
Not sure what you mean by average end user?
and are you saying that my nerf gun design is starting a perfect race?

#15 User is offline   Siarnaq 

  • Member
  • Group: Members
  • Posts: 11
  • Joined: 18-March 12
  • Country:United States
  • State:Oklahoma

Posted 02 April 2012 - 01:22 PM

 Dremz3, on 02 April 2012 - 12:38 PM, said:

Sorry I couldn't answer any questions yesterday, I'm stuck with this two post limit.


You could edit answers to some of the questions into the OP.

Quote

Siarnaq:
I can't think of a way to fasten the priming handle to the piston without making it go through the piston, because it would be much less sturdy.


You would definitely need to use something solid, like a 5/8" dowel rod. The way I'd do it is epoxy it in place on the piston, and then drill a hole on the opposite side. That way you could fit a scredriver/drillbit in to drill a hole through both the piston and the dowel, that you could then run a screw through. You'd have to use a relatively big screw; I'd probably use 1/4", though that might be a little big. It would be a bit less sturdy and harder to do, yeah, but IMO it'd be worth it to eliminate all that unnecessary length. It would also help avert the exposed length of buckling spring that Zorn mentioned, but if having it as a eugenics project is your goal that's probably a bad thing, hehe.

Share this topic:


  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users