Posted 31 August 2011 - 10:29 AM
Plugging a pump doesn't lower the pump count THAT much, only a little. You might be at full pressure a few pumps before, but without an OPV you can't tell. If you want to lower the pump count you could cut and plug the tubing that goes to the hornet if you don't want to attach the two anymore. Make sure to use very strong glue.
Posted 31 August 2011 - 10:48 AM
This post has been edited by Zorn's Lemma: 31 August 2011 - 10:49 AM
Kruger and Dunning (1999)
Posted 31 August 2011 - 11:26 AM
That's a fag valve. They don't come with fag values, I installed that myself.
Make sure your adhesive for the pump sticks to all your material types, like plastic and vinyl tubing.
This post has been edited by Curly: 31 August 2011 - 11:27 AM
Posted 31 August 2011 - 11:50 AM
You're doing it wrong Zorn.
Plugging an airguns' pump will not decrease the number of pumps to fill the tank, it will allow you to exceed standard pressures in the air tank, allowing better ranges.
If you want to decrease the number of pumps to fill the tank then replace the pump with a different pump.
Posted 02 September 2011 - 10:40 AM
That is the response I get for trying to help you understand how much of a retard you are. Don't ask a question when you can find it yourself. Go back to playing Halo 4 all night you ten year old bitch
This post has been edited by jigglypuff: 02 September 2011 - 10:41 AM