Hello and welcome to my doubleshot modding guide. You can make a sexy gun in a day using this simple guide.
1.
First thing you should do when your gun is fresh out of the pack is to cut off the barrel. Do this using a small saw or anything thats good for cutting large plastic. Afterwards, your gun should look like this.
I like to cut the gun behind the nail (look on the bottom) to add a little bit of barrel for that "sawn off" look.
2.
Now you may paint the gun. use any color, but i really suggest the Krylon Fusion for plastic spray paint. It bonds with the plastic and looks awesome. It is $4 at Home Depot. to start unscrew the stock (this is the only screw you have to deal with!) and spray paint it and the plastic bolts seperatley from the gun. I used tape to cover up the trigger and a little hole on the bottom from which you can see the string (internals) and you probably dont want that to be touched.
Here is a pic of my gun halfway through the painting process. Notice the stock and bolts on the left.
3. While you wait 20 minutes inbetween coats you can use a small screwdriver and put it through the back of each shell. make the hole a little bigger and take out that rod that the darts sit on. Now you can use stefans and have a bit more power.
Here is a before and after of this mod.
Before on right, after on left.
4. Screw the stock back on when you are done. Now enjoy using your new Doubleshot.
Completed Doubleshot:
This is my first Thread and second post, so leave some comments please! -NerfKnack
n
