NerfHaven: How Do I Mod A Water Warriors Pressure Equalizer - NerfHaven

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

How Do I Mod A Water Warriors Pressure Equalizer How do i mod this thing?????

#1 User is offline   Jackal 

  • Member
  • Group: Members
  • Posts: 6
  • Joined: 02-March 09

Posted 08 May 2009 - 01:01 PM

Okay so here's the thing, this is my first modification and I need some help. My problem is, is that I dont really know how to mod water guns, I mean I have a pretty good idea of how to mod. The gun is air pressurized and has a pump and a trigger that changes the amount of water you can let loose. It would be helpful to have the reply today because IBNA Unit 7-13 is getting together and I need a gun.

THANKS A LOT for who ever helps me here is a a link to the gun

http://www.isoaker.com/Armoury/Analysis/20...wequalizer.html


thanks Jackal
0

#2 User is offline   Capten Karat 

  • Member
  • Group: Banned
  • Posts: 68
  • Joined: 25-January 09

Posted 08 May 2009 - 01:10 PM

Glue a barrel on the place where the water comes out, done.
Take of your thinking caps, and put on your ALGEBRAINS!

#3 User is offline   Salmon 

  • Member
  • Group: Members
  • Posts: 447
  • Joined: 10-December 07
  • Location:Austin, TX

Posted 08 May 2009 - 03:24 PM

Tell you what man, when you get over to my house I'll show you how it works. And yeah, and I can't wait for tomorrow's war too.
Welcome to I-dont-care-isburg, population: me.
We're located in I-Don't-Give-a-Damn County, in scenic Shut-the-Hell-Up-achussets.
Maybe you're familiar with our annual charity drive where we ask for shit, and no one gives any.
0

#4 User is offline   Banshee 

  • Member
  • Group: Members
  • Posts: 664
  • Joined: 22-July 07
  • Location:Chandler, Arizona
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 08 May 2009 - 04:06 PM

Check out my mod for the MAX D 2000 in the directory at the bottom. If you can get the gun open, the process should be very similar. But don't mount the barrel to the outside, the air output is too small from that little hole.
Like my page on Facebook! PM me, I do commissions!
0

#5 User is offline   Galaxy613 

  • Member
  • Group: Members
  • Posts: 999
  • Joined: 08-January 08
  • Location:USA, Woodbridge, VA

Posted 08 May 2009 - 05:38 PM

View PostBanshee, on May 8 2009, 08:06 PM, said:

But don't mount the barrel to the outside, the air output is too small from that little hole.


Indeed, I always find it funny when people ONLY tell you "glue a barrel onto it, and done!" Wouldn't the air output so small to even move a dart down a barrel?
[Former Caretaker of the Guru Mk2]
0

#6 User is offline   Noob 001 

  • Member
  • Group: Members
  • Posts: 32
  • Joined: 07-January 09
  • Country:United States
  • State:Minnesota

Posted 08 May 2009 - 06:14 PM

Quote

Wouldn't the air output so small to even move a dart down a barrel?


You really have to mount the barrel at some point inside the gun; the outside hole is just too small. I tried exactly what Banshee said not to do, on a Storm 1200 water gun. 5-inch barrel attached straight to the hole the water comes out of. It got the dart out of the barrel, I grant you, but it went dramatically less than a foot. For giggles, I proceeded to fill the gun with water and tried again. About 10-15 ft flat this time, and the dart looks incredibly majestic riding a plume of water out of the barrel. Utterly useless effort in the end, but a fun time. Best instead to attach the barrel as close to the output of the valve as possible.

EDIT: Huzzah 10th post!

This post has been edited by Noob 001: 08 May 2009 - 06:33 PM

0

#7 User is offline   Talio 

  • Not your mother
  • Group: Contributors
  • Posts: 2,781
  • Joined: 17-July 03
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 09 May 2009 - 09:34 AM

Figure it out. And Noob, we can see your post count. Pull that shit again and you won't hit 20, I assure you.

Talio.
New posts on my blog, check it out. - Click on the ad too, cause I get money per click. Give back to the Admin team for once!
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users