Jump to content


Photo

Quad B


14 replies to this topic

#1 sputnik

sputnik

    Member

  • Members
  • 911 posts

Posted 04 December 2008 - 01:12 AM

This is another write-up for the Buzz Bee Big Blast.

Materials needed:
1 Buzz Bee Big Blast (4B)
1 Phillips head screwdriver
A minimum of 11” of 1/2 inch Sch. 80 PVC
One 1/2 inch slip+thread Sch. 80 PVC coupler
One 1/2 inch slip+thread Sch. 80 PVC bushing
A minimum of 12” of PETG (Medium Wall)
Plumber’s Goop
PVC Pipe Cutter
Optional:
More Sch. 80 and PETG for additional barrels
One slip+thread 1/2 Sch. 80 PVC coupler
Hot Glue Gun
E-Tape

Let’s get started.
Here is the stock gun.
Posted Image
It shoots rockets about 25-30 feet.
Posted Image
First, open her up.
You will need to break/burn.hack/dremel the orange ring apart.
Posted Image
The internals.
Posted Image
Now cut off the rocket barrel flush with the dump valve.
Posted Image
Now get your bushing out and test fit it on the dump valve.
Posted Image
Wrap the dump valve in E-Tape until the slip+thread bushing fits securely.
Trim the excess E-Tape.
Posted Image
Now Goop the bushing and tank together and let it dry.
Posted Image
  • 0
tcambre on IRC.

<3

#2 sputnik

sputnik

    Member

  • Members
  • 911 posts

Posted 04 December 2008 - 01:14 AM

While that’s setting, we need to work on the shell.
This middle plastic shelf needs to be removed.
Posted Image
I used 2 pairs of needlenose pliers and a knife to remove it.
Repeat for the other side.
Next, the front shelf needs to be widened.
Posted Image
Same thing, both sides.

I also cut out enough of the pump cover so that I can rotate the pump handle 360 degrees. (Comes in handy for quick pumping.)
Posted Image




Ok, now onto the barrels.
Take your PETG and test fit it in the Sch. 80.
If it is a good fit, you can leave it. If not, take some Teflon tape and wrap a little of the PETG with it, then try it. Repeat until PETG is secure. The end of the PETG should stick out roughly 1/2 inch from the Sch. 80.
I went ahead and made a speedloader for it.
Posted Image
Hot glue secures the 2 barrels together.

After the Goop has dried, reassemble the monster.
Posted Image
Posted Image
Posted Image
Posted Image

What I like about the bushing is that it looks so clean.




The advantage of having the bushing on there is so that you can use different couplers and barrels.
Posted Image


For example, my breech is threaded, so I unscrew the slip+thread coupler and replace it with the breech barrel, which has a double threaded coupler on it.

Posted Image


Demo vid.

1:40 is when it gets gnarly.

Blurry cell phone pic 18 hours later
Posted Image

It gets ranges in the 100s.


I may decide to do a bitchin' PJ on this, but who knows.

Hope this gets added to the Mod directory!

Edited by sputnik, 04 December 2008 - 10:47 PM.

  • 0
tcambre on IRC.

<3

#3 Herpestidae

Herpestidae

    Member

  • Members
  • 100 posts

Posted 04 December 2008 - 01:19 AM

Nice write-up. It is good to see a different take on a singled big blast. Keep up the good work!
  • 0
Grimlock no bozo! Grimlock king!

#4 Blue

Blue

    Member

  • Members
  • 2,222 posts

Posted 04 December 2008 - 01:21 AM

Why didn't you do the shell minimization thing? I'd imagine it would make changing barrels easier.
  • 0

#5 bobafan

bobafan

    Member

  • Members
  • 635 posts

Posted 04 December 2008 - 01:24 AM

You really need to work on your aim.
  • 0
thaygor: all i remimber is pumping it hard and shooting than trying to pump again

---

<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad

#6 sputnik

sputnik

    Member

  • Members
  • 911 posts

Posted 04 December 2008 - 01:25 AM

Why didn't you do the shell minimization thing? I'd imagine it would make changing barrels easier.

Mostly because I like the way it looks stock.
Also, hacksaw cuts that large tend to be tedious and annoying.

You really need to work on your aim.


If you listen to the video, you'll hear that the stefan was vagina'd.
The hot glue was coming off, and we all know what that does for aim.

Edited by sputnik, 04 December 2008 - 01:28 AM.

  • 0
tcambre on IRC.

<3

#7 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 04 December 2008 - 02:26 AM

Wow. Funny how I am watching this for the first time now. As I am killing time waiting for my own video to upload. Which has a very similar feel to it.

Vagina'd. :lol:

I cannot believe that caught on.

Edited by Forsaken_angel24, 04 December 2008 - 02:27 AM.

  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#8 sputnik

sputnik

    Member

  • Members
  • 911 posts

Posted 04 December 2008 - 02:44 AM

Vagina'd. :lol:

I cannot believe that caught on.

If the shoe fits....

And thanks!
  • 0
tcambre on IRC.

<3

#9 Bomberman

Bomberman

    Member

  • Members
  • 730 posts

Posted 04 December 2008 - 03:12 PM

That looked, and sounded like it hurt. FA, you need to start selling Balistic gel dummies as test objects, it sucks being the test subject. It's what the MythBusters use anyway.

Edited by Bomberman, 04 December 2008 - 03:12 PM.

  • 0
QUOTE(silentsnipe) View Post

It's not like that. I put lube on it and its the same. Its just stuck. And when I cock it back it goes farther back then usual. Also I push as hard as I can and it wont go back in. I've tried the methods and they wont work. Also pics are up.

#10 Galaxy613

Galaxy613

    Member

  • Members
  • 999 posts

Posted 04 December 2008 - 10:41 PM

It gets ranges.


Understatement of the year folks.

Also, you never did say if it's pump is plugged or not.
  • 0
[Former Caretaker of the Guru Mk2]

#11 sputnik

sputnik

    Member

  • Members
  • 911 posts

Posted 04 December 2008 - 10:46 PM

Also, you never did say if it's pump is plugged or not.


Not plugged.
I figured if I didn't say anything about it, y'all would assume I left it.
  • 0
tcambre on IRC.

<3

#12 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 04 December 2008 - 10:53 PM

Wow. Funny how I am watching this for the first time now. As I am killing time waiting for my own video to upload. Which has a very similar feel to it.

Vagina'd. :lol:

I cannot believe that caught on.

Actually NerfCrazy and I kept saying that at Fall MNNO, because I kept Vaginaing arrows by shooting them out of my Roto Rocket. I also used that term when Zudikas and I were having a stock dart war with my Blastfires and they darts kept getting Vagina'd for some reason.
  • 0

#13 Galaxy613

Galaxy613

    Member

  • Members
  • 999 posts

Posted 04 December 2008 - 11:58 PM


Also, you never did say if it's pump is plugged or not.


Not plugged.
I figured if I didn't say anything about it, y'all would assume I left it.


I just wanted to clear that up, especially with that show of power at the end.
  • 0
[Former Caretaker of the Guru Mk2]

#14 slienced assassin

slienced assassin

    Member

  • Members
  • 66 posts

Posted 09 December 2008 - 04:56 PM

This looks like a very good Big Blast mod. Although I can't understand why the title for this is quad b. There is olny one Big Blast.
  • 0
92% of teens have moved on to rap.
If you are part of the 8% who still listen to "real music",
copy and paste this into your signature

http://supernerf.piczo.com/?cr=1

#15 Vistagecko

Vistagecko

    Member

  • Members
  • 327 posts

Posted 09 December 2008 - 06:30 PM

This looks like a very good Big Blast mod. Although I can't understand why the title for this is quad b. There is olny one Big Blast.


I assume it is because the abbreviation for buzz bee big blast is BBBB. Four B's, or a quad. Quad B = BBBB = buzz bee big blast.

Or so I think.

Edit: Change your avatar.

Edited by Vistagecko, 09 December 2008 - 06:35 PM.

  • 0
QUOTE(The Kart Racing Nerf Man @ May 6 2009, 07:31 PM) View Post

I lubed it again and again, I don't see what an extra 2 centimeters does. I don't think I will cut it off.
BMX Forum


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users