NerfHaven: Big Bad Sexy! A New Take On The Cpvc Barreled Bbb - NerfHaven

Jump to content

  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

Big Bad Sexy! A New Take On The Cpvc Barreled Bbb HAVE A LOOK!

#1 User is offline   joeyaglr444 

  • Member
  • Group: Members
  • Posts: 376
  • Joined: 11-August 05
  • Location:Toronto, Ontario

Posted 02 November 2007 - 06:45 AM

Posted Image


What you will need:
Lots of glue sticks
Glue Gun
Phillips screwdriver ( or addition sign screwhead)
Epoxy
and some patience?

Alrighty lets get starty! I bought a Big bad bow at my Toys R us for about $20.
I've seen many people on this very site mod them and have had good results but I was tired of doing other peoples mods, So I made my own. I had a ton of 1/2 inch Cpvc left from past modding.

Ripped out the internals and saw what i could do. I threw out all the air restricter pieces except this one
Posted Image cut where it is marked and keep this piece for later your going too need it.

Not much to do but replace the barrel. But how? well I took this piece right here, which was located at the front of the gun and cut off the barrel where the arrow goes, all the way down to the base like this
Posted Image

Here comes the part that i was surprised actually worked. I was really worried about sealing the barrel properly so I took a very bold step. I cut out 8.5 inch of cpvc and put it in the base of the barrel which I cut off earlier. Than i said to myself "How the hell am i going to make sure this is sturdy enough?"
I put the barrel in enough so that the plunger wouldn't knock it senseless. and than i sorounded it in a sea of very hot glue.
Posted Image
But i didn't put too much otherwise the plunger casing wouldn't fit.
So I glued it up too here.
Posted Image
Make sure theres no air pockets it should be completely glued in(everywhere its blue).
Do not exceed that red line or your pieces will not fit together. Your going to need to hold your barrel straight until the glue dries, but once it does your good to go. now put the white piece we had earlier and put it back in and it should look like this: Posted Image
so your new barrel is almost complete.
Posted Image

I epoxied the new barrel to the plunger casing for an airtight barrel.
Now put it all back together and you have a new Big Bad bow that capable of hitting targets 100 feet away with top accuracy!(and a good stefan)

Posted Image

Heres the Demo Video! > http://www.youtube.c...h?v=_52zfaag3ek
Thnk you custom snake for that one picture.
HEH

This post has been edited by joeyaglr444: 19 August 2008 - 05:44 AM

Boys Become Men....Men Become Wolves

Blaffair to Rememblack.
0

#2 User is offline   Kenpachi Taicho 

  • Member
  • Group: Members
  • Posts: 80
  • Joined: 18-September 07
  • Location:London, ON

Posted 02 November 2007 - 06:58 AM

First off, very nice write up and very nice mod. It's rediculus that you're hitting 118' accuratly with only a barrell replacement. This mod makes me want to go o TRU and see what I can do with a BBB. I also like the name, Big Bad Sexy says it all!
0

#3 User is offline   joeyaglr444 

  • Member
  • Group: Members
  • Posts: 376
  • Joined: 11-August 05
  • Location:Toronto, Ontario

Posted 02 November 2007 - 07:10 AM

View PostKenpachi_Taicho, on Nov 2 2007, 07:58 AM, said:

First off, very nice write up and very nice mod. It's rediculus that you're hitting 118' accuratly with only a barrell replacement. This mod makes me want to go o TRU and see what I can do with a BBB. I also like the name, Big Bad Sexy says it all!


Thanks, the 118 feet thing doesnt mean its going to hit 118 all the time though but out of all the times ive fired it thats the farthest.
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.
0

#4 User is offline   TED 

  • GAY PORN HARD
  • Group: Ambassadors
  • Posts: 1,285
  • Joined: 29-March 03
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 02 November 2007 - 08:15 AM

What's stopping the gun from sucking the dart into the plunger tube or you ram rodding it too far?

This post has been edited by Dark Shrimp: 02 November 2007 - 08:15 AM

Star Wars can go fuck itself.
0

#5 User is offline   Forsaken angel24 

  • Member
  • Group: Contributors
  • Posts: 2,469
  • Joined: 09-July 05
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 02 November 2007 - 08:17 AM

Very nice Joey, I like it when I see people get rid of dead space resulting in better range and velocity.
118 is a little doubtful though without some kind of spring replacement.
Nice write up and consider it added.

Here are a couple suggestions though.
Posted Image
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But Iím just not the angel you knew.
0

#6 User is offline   joeyaglr444 

  • Member
  • Group: Members
  • Posts: 376
  • Joined: 11-August 05
  • Location:Toronto, Ontario

Posted 02 November 2007 - 10:29 AM

View PostForsaken_angel24, on Nov 2 2007, 09:17 AM, said:

Very nice Joey, I like it when I see people get rid of dead space resulting in better range and velocity.
118 is a little doubtful though without some kind of spring replacement.
Nice write up and consider it added.

Here are a couple suggestions though.
Posted Image


So u want me too clear off the crappy uneven edges of the air restricter thingy and fill it with glue all the way to the top?
im in the mioddle of solving that problem darkshrimp.

This post has been edited by joeyaglr444: 02 November 2007 - 10:49 AM

Boys Become Men....Men Become Wolves

Blaffair to Rememblack.
0

#7 User is offline   Forsaken angel24 

  • Member
  • Group: Contributors
  • Posts: 2,469
  • Joined: 09-July 05
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 02 November 2007 - 12:55 PM

not all the way to the top, all the way to the line that you made earlier.
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But Iím just not the angel you knew.
0

#8 User is offline   joeyaglr444 

  • Member
  • Group: Members
  • Posts: 376
  • Joined: 11-August 05
  • Location:Toronto, Ontario

Posted 02 November 2007 - 01:26 PM

Thanks a lot you just saved my guns life.
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.
0

#9 User is offline   keef 

  • Member
  • Group: Members
  • Posts: 1,389
  • Joined: 26-May 07
  • Location:Denville, New Jersey

Posted 02 November 2007 - 05:07 PM

I did the same thing a month or 2 ago, except I used FBR and craft foam. With a Handyman spring, I get 90 feet MAX! Thats pushing it 5-10 feet. How are you getting 118' max?

Nice mod though...
Timothy M-Lick <3
0

#10 User is offline   joeyaglr444 

  • Member
  • Group: Members
  • Posts: 376
  • Joined: 11-August 05
  • Location:Toronto, Ontario

Posted 02 November 2007 - 05:54 PM

I said capable of hitting 118 probably a lucky shot. who knows?
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.
0

#11 User is offline   nerfturtle 

  • Member
  • Group: Members
  • Posts: 223
  • Joined: 23-January 07
  • Location:East Bay Area

Posted 02 November 2007 - 06:18 PM

Starbuck said he got 120' with his BBB carbine, which I see to be perfectly possible given the emormous plunger chamber. FA_24 got 120' out of his LS, and BBBs have a bigger plunger chamber than the LS.
The tough coughs as he ploughs the dough.
-Dr. Suess
0

#12 User is offline   keef 

  • Member
  • Group: Members
  • Posts: 1,389
  • Joined: 26-May 07
  • Location:Denville, New Jersey

Posted 02 November 2007 - 07:45 PM

Starbuck is 6'5 and it was angled 40*. Thats about 30* higher, and 1'5 feet taller than "the average joe"'s shot.
FA is amazingly talented at modding so thats different.

I mean, a lucky shot at 118' is common when actually playing, and not just shooting, but I just was surprised when he said flat.
Timothy M-Lick <3
0

#13 User is offline   n-strike 

  • Member
  • Group: Banned
  • Posts: 358
  • Joined: 18-January 07
  • Location:Richmond, BC

Posted 03 November 2007 - 11:03 AM

Do you have to blow it down, or ram-rod it down? You should've put a coupler on it...Just a suggestion. :)
kthxbaisend

#14 User is offline   Forsaken angel24 

  • Member
  • Group: Contributors
  • Posts: 2,469
  • Joined: 09-July 05
  • Country:NULL (No answer)
  • State:NULL (No Answer)

Posted 05 November 2007 - 08:09 PM

View Postnerfturtle, on Nov 2 2007, 11:18 PM, said:

FA_24 got 120' out of his LS


View PostForsaken_angel24, on Jan 23 2007, 11:15 PM, said:

Ranges are typical.
99'
100'
102'
100'
101'
102'


I don't think I ever said I got 120' out of my longshot. Angled for sure.
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But Iím just not the angel you knew.
0

#15 User is offline   n-strike 

  • Member
  • Group: Banned
  • Posts: 358
  • Joined: 18-January 07
  • Location:Richmond, BC

Posted 06 November 2007 - 06:21 PM

Why didn't you add a coupler?
kthxbaisend

Share this topic:


  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users