Jump to content


Photo

OMW problems


9 replies to this topic

#1 DKE15240

DKE15240

    Member

  • Members
  • 10 posts

Posted 24 August 2015 - 07:43 PM

So, I bought a OMW kit 1,2,3 a long time ago but now I can't catch it unless I do it really fast a lot of times. Is there any thing i can do to make it catch better?
  • 0

#2 Droid31

Droid31

    Member

  • Members
  • 266 posts

Posted 24 August 2015 - 07:46 PM

What blaster did you buy the kit for? It depends if its warn on the catch its self or the plunger assembly.
  • 0

#3 Birch

Birch

    Member

  • Members
  • 181 posts

Posted 24 August 2015 - 11:06 PM

1. Which blaster are the kits for?

2. Pictures would help. Otherwise we have little idea of the issue

3. I would open the blaster remove the spring, and then prime the blaster and manually push the plunger to find out where the system is failing.
  • 0

It's like a Hurricane ate a Tornado and shat out a Monsoon!!


#4 DKE15240

DKE15240

    Member

  • Members
  • 10 posts

Posted 25 August 2015 - 01:22 AM

What blaster did you buy the kit for? It depends if its warn on the catch its self or the plunger assembly.

I bought this kit for the retaliator and the catch and plunger assembly doesn't seem to have any damage.
  • 0

#5 Birch

Birch

    Member

  • Members
  • 181 posts

Posted 25 August 2015 - 08:32 AM

I bought this kit for the retaliator and the catch and plunger assembly doesn't seem to have any damage.


Can the Catch move freely? Also, Is the prime-length correct and and is is pushing the plunger all the way back to meet the catch?
  • 0

It's like a Hurricane ate a Tornado and shat out a Monsoon!!


#6 DKE15240

DKE15240

    Member

  • Members
  • 10 posts

Posted 27 August 2015 - 05:56 PM

Can the Catch move freely? Also, Is the prime-length correct and and is is pushing the plunger all the way back to meet the catch?

The catch can move freely and i am moving the cocking handle as far back
  • 0

#7 Lunas

Lunas

    Member

  • Members
  • 142 posts

Posted 27 August 2015 - 07:34 PM

Can the Catch move freely? Also, Is the prime-length correct and and is is pushing the plunger all the way back to meet the catch?

I have the #1 and #2 kit on my retaliator did you use the supplied spring for the catch or the old spring. The supplied spring is of a higher strength than the old spring. I also suggest going with the 5kg spring vs the 7kg spring that comes with the 3rd stage kit. The 7kg does not improve it that much over the 5kg just makes it much much harder to prime.
  • 0

#8 The2ndBluesBro

The2ndBluesBro

    Member

  • Members
  • 576 posts

Posted 27 August 2015 - 10:35 PM

I have the #1 and #2 kit on my retaliator did you use the supplied spring for the catch or the old spring. The supplied spring is of a higher strength than the old spring. I also suggest going with the 5kg spring vs the 7kg spring that comes with the 3rd stage kit. The 7kg does not improve it that much over the 5kg just makes it much much harder to prime.


IIRC from a Drac video, the 7kg spring is required to drive the stage 3 extended barrel (it induces too much barrel drag otherwise).
  • 0

Nerf, Gaming, knives: https://www.youtube....FjcObRZTl2KReDQ

 


#9 Lunas

Lunas

    Member

  • Members
  • 142 posts

Posted 28 August 2015 - 07:23 PM

IIRC from a Drac video, the 7kg spring is required to drive the stage 3 extended barrel (it induces too much barrel drag otherwise).

yes but it also makes the blaster alot harder to prime.

Also about that extended barrel it sucks the attachment point it has is a slight upgrade but the barrel itself sucks if memory serves omw went back and tweaked it to be bigger around so it caused less drag... I felt this was a shame as i liked the look of the stage 3 kit but when i found out the drawbacks and that the 7kg spring + the barrel ended up with worse ranges and speeds than stage 1 and 2 i decided not to bother with stage 3... And guess what i don't have any issues with my retaliator lockup all locks removed and it works perfectly it is gathering dust as i have moved onto a stryfe and rapid strike but my advise to solve the lock up issues is unscrew the barrel and use the 5kg spring after making sure the trigger and catch springs are the upgraded ones and did not slip out of place...

If you absolutely need to use the extended barrel i suggest brassing it make sure you get big enough brass. To widen the barrel a dowel with a piece of sand paper wrapped around it then chucked in a drill will make short work of opening it up then push a brass 7/16 size tube down it if it ends up too loose you can glue it but it should fit so snugly it wont need anything. It will be wider and it should solve the issue with the barrel reducing the distance and speed.

Edited by Lunas, 29 August 2015 - 04:27 AM.

  • 0

#10 F1Nerf

F1Nerf

    Member

  • Members
  • 17 posts

Posted 29 August 2015 - 01:16 PM

If you absolutely need to use the extended barrel i suggest brassing it make sure you get big enough brass. To widen the barrel a dowel with a piece of sand paper wrapped around it then chucked in a drill will make short work of opening it up then push a brass 7/16 size tube down it if it ends up too loose you can glue it but it should fit so snugly it wont need anything. It will be wider and it should solve the issue with the barrel reducing the distance and speed.

I think you mean 9/16" brass, Lunas. 7/16" is smaller than dart diameter.
  • 0
F1Nerf


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users