3 replies to this topic

[Number 1 nerf nut]

So I bought a secret strike and a retaliator barrel at the local Goodwill for a dollar each, and I thought I put them together into a itegration here's how it went

tools needed
small screwdriver
glue gun and glue sticks
flat head screwdriver (optional)
rubber band(s)(optional)
e-tape (optional)

so the first thing you do is take of the secret strike shell, then you take the barrel apart and remove the orange piece for the bottom rail, secret strike mod(optional) the flat screw driver is for the secret strike dart post removal mod, next you attach your secret strike with e-tape or rubber bands or both to the barrel with the pump side of the secret strike on the rail, next put some hot glue where the retaliator barrel and your meet, after the glue has hardened take off the e-tape(and/or)rubber bands and put some more glue on, let that harden and your done!

sorry that there are not any pictures but I don't have a online picture account

Ps this is my first mod so tell me how I did

USER WAS WARNED FOR THIS POST

Edited by Zorns Lemma, 05 October 2014 - 01:02 AM.

[Zack Dorris]

Okay first off if you want to post write ups you'll want some pictures. I suggest signing up fir imgur or photobucket. Second of all I suggest something stronger than hot glue. Try epoxy that is what I find to be the best long-term adhesive. I suggest for am integration a roughcut or strongarm. The sspb is more of a last resort in your pocket style blaster like the jolt. If you were doing this for fun to try to get into modding kudos to you. Gotta start somewhere. Hope that helped.

[Number 1 nerf nut]

thanks for the advise, i'll go check out Photobucket

[Zorns Lemma]

Modification guides without pictures and lacking legibility are not very useful.