Jump to content


Photo

Homemades Picture Thread

Photos of Homemade Nerf Guns

1306 replies to this topic

#1251 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts

Posted 28 May 2015 - 09:24 PM

Posted Image
Improved ESLT trigger

Posted Image
Low Profile Stock with supa effeminate cheek cushion

Posted Image
Speed Hole is located on the bottom, and enlarged to 3/8" DIA from 1/4". Before the speed hole was right by your ear and made a loud pang every time it was fired, by having it on the underside, the blaster seems much quieter.

Posted Image
Rear sight

Edited by Aeromech, 30 May 2015 - 09:11 PM.

  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#1252 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 29 May 2015 - 06:43 PM

*
POPULAR

I present a monument to all the sins of the Nerf Internet Community: The reduced-length Danger Zone.

I managed to take off a foot of length from my blaster by putting the handle in front of the slots. It's now only about four and a half feet long with the stock. The bow arms are both four feet long. The blaster should be finished this weekend; I just need to install the clothespin and string it.

Posted Image


Posted Image

It is incredibly heavy.
  • 1

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#1253 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 29 May 2015 - 07:44 PM

Posted Image

I don't usually post commissions but here's a bullpup and rainbow pistol combo.

Edited by Xellah, 01 June 2015 - 08:33 PM.

  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#1254 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts

Posted 01 June 2015 - 05:02 PM

Posted Image

Posted Image

Posted Image

An actual crossbow. Medieval style.
  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#1255 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts

Posted 03 June 2015 - 07:38 PM

IMG_20150603_203237_zpsaik5ppnu.jpg

IMG_20150603_203325_zpskrqelp25.jpg

IMG_20150603_203400_zpsky6opwoz.jpg

Cantilever ESLT wye stabilier and pic rail moumt.

Will Aeromech get his website up and running before APOC? Stay tuned.


Edited by Aeromech, 12 December 2016 - 04:52 PM.

  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#1256 TheNerfZilla

TheNerfZilla

    Member

  • Members
  • 99 posts

Posted 06 June 2015 - 09:48 PM

A couple crappy pictures of my two new AABows, based off of Naturalman7's writeup.

Posted ImageDSC00254 by TheNerfZilla, on Flickr

They both have 1/2 PVC stubs cemented on to 1/2 CPVC, because I didn't feel like countersinking machine screws into PVC, and I wanted to get a nice seal.

Posted ImageDSC00261 by TheNerfZilla, on Flickr

One of them has a messy end cap, but the other one is nice and flush.

Posted ImageDSC00260 by TheNerfZilla, on Flickr

That one also has a hook on the end, to allow for variable amounts of pre-tension. It works fairly well, but it needs improvement.

Posted ImageDSC00255 by TheNerfZilla, on Flickr

They both run off of RSCBs.

Posted ImageDSC00262 by TheNerfZilla, on Flickr

They have 17/32 brass barrels, but they need a little more reaming out.

Posted ImageDSC00263 by TheNerfZilla, on Flickr

Posted ImageDSC00265 by TheNerfZilla, on Flickr

They both run off of a new plunger head prototype that gets 100% percent air seal with almost no work. There will be a new thread about that soon.
  • 0
I have a blog now!
How to Get Started Nerfing Pt. 1
Eat spaghetti to forgetti your regretti 

#1257 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 12 June 2015 - 03:04 PM

PullSCRT 2.0

Posted Image

Posted Image

The most noticeable change from 1.0, is the curved 3D printed stock. It's cheaper in terms of labor and materials, and is more comfortable than the old version. We've also eliminated the need for square plunger rod material, which is expensive, and less readily available than 1/2" rod. The priming handle is now guided by the newly added bottom stock bar, which is also 1/2" rod.

You can see here how the new priming handle is wedged between the top and bottom of the stock. The bottom rod fits inside the handle and is mounted by the same screw used to mount the handle.

Posted Image

Another small change is the trigger. Instead of having a 1/4" rod for the trigger spring, we used a longer spring and printed a space to keep it aligned.

Posted Image

I also dyed it purple because it looks cool.

Edit:

I forgot to mention these things.

Posted Image

It's an inflatable air pillow to use for winterizing your pool. It's only $26 shipped and is approximately 3' x 15'. We'll see how durable it is at the next war, and what we're going to do about staking it down. Only takes about a minute to inflate and deflate when using a shop vac.

Edited by Ryan201821, 12 June 2015 - 03:48 PM.

  • 0

#1258 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 13 June 2015 - 10:15 PM

Ctrl c

Posted Image

Ctrl v, v, v

Posted Image

Money (Store) shot:

Posted Image
  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#1259 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 25 June 2015 - 07:19 PM

First double-post. SUPER SET!

Contract PimpBow for pdpfeifer.

Posted Image

Black HDPE trigger with a sweet extension spring. I've always run two on my +Bows but this one gives such a smooth trigger pull.

Smoothest handle eva.

Posted Image

Omni-directional catch, [k25]. Monstrous 8" of draw. Perfect seal, for all its worth.

Posted Image

15 + 1 rainbow pistol and 3 bullpup bodies. I've decided to keep producing since they've sold so well.

Courtesy of Ryan, 'da best ever:

Posted Image

Because I don't want to make skirt seal plunger heads.

Edited by Xellah, 25 June 2015 - 07:51 PM.

  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#1260 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 28 June 2015 - 06:38 PM

After more than a year and a half of development, war-testing, and re-designing, I've finally completed my design goals with this optimized bullpup springer.

Here's my primary for SPANO and Apoc:

Posted Image

The retractable stock is the newest feature. You may recall my last version that used aluminum rods. This one uses the same marine-grade HDPE as the handle and body clamps, making it lighter, smoother, and just as sturdy. It has 6 positions and keeps the OAL down while maintaining comfort. The full blaster measures 22" with the stock retracted and a tad over 26" in the 6th position.

Posted Image

Here's a close-up of the stock design:

Posted Image

This version, and all future bullpup builds, uses Ryan's printed plunger head. They fit so nicely into the design in place of a skirt seal sandwich that I didn't have to redesign any aspect of the blaster.

It's hard for me to find a fault in this design with the exception of adding a 3d printed priming grip. It is the shortest possible springer profile with 7" of draw, pull-to-prime pump-action, slam-fire, supreme ergonomics, and a sick plunger head with no vacuum loading. All it needs is a paint job and it will probably serve as my permanent primary.

I'm now comfortable to complete the write-up. Continual revisions have made me hesitant to create a thread only to make constant changes without documented testing. Graduation and job searching have taken priority but I've been watching this video for inspiration on completing the build guide. I believe I've made all of the tweaks and improvements necessary to make the blaster easily produceable, reliable, and pretty cheap to build.

In light of Langley's recent thread on blaster names, I deem the name of this blaster to be Gucci Mang. It has its own theme song.

Edited by Xellah, 29 June 2015 - 08:31 PM.

  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#1261 blitz

blitz

    Member

  • Members
  • 285 posts

Posted 30 June 2015 - 07:26 PM

2015-06-29 14.27.41.jpg Picture dump of my old projects. Nerf like it's 2012!
Koree got me obsessed with the DoubleRainbow design, and I made too many of them.



Mega Double Rainbows. 2" Plungers. One for me, the other for ChaosPropel. I'll get it to him one of these days.


Then I made a semi-experimental thing with two 1.25" pvc plungers, it works okay.



I also made a Fallopian Mk. II, which I used at DCNF 5. It worked really well, and I also painted it at some point. It's much longer than I expected, but I also fucked up on on the plunger-compression bs. I'll probably whip a shorter one up later this summer.




I bought an impressively shitty +Bow from someone on here and probably should have made a new one for all the work I put into it. The cuts were impressively bad.

Anyway, I made new 1/4" single-piece side plates that are about 2 inches shorter than the original Slug design, new stock plate, wood handle, aluminum plunger tube, magpul grip, sanded and painted, etc. I didn't put clear coat on the side plates because I kinda want them worn or whatever. I also bolted random metal parts to it., including a Coca-Cola bottleopener. I need to add more.

Attached Thumbnails

  • 2015-06-29 14.29.15.jpg
  • 2015-06-29 14.29.59.jpg
  • 2015-06-30 19.44.48.jpg

Edited by blitz, 09 August 2017 - 09:30 AM.

  • 0
Blitz, member of the FNBS
"sexual innuendo no intendo"

#1262 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 05 July 2015 - 03:27 PM

24 hours late to America Day, but still posting this for the sake of Old Glory:

Posted Image

Can't think of anything more American than a homemade nerf blaster built with the red, white, and blue parts. Black furniture for added edginess!

HDPE doesn't accept aerosol paint whatsoever, in case anyone was wondering.

Back to American-made MUSCLE:

Posted Image

This is what freedom looks like. Ah, just soak it up.

Something, something melting pot metaphor, land of the free:

Posted Image

More like land of the SWERVE. #Fuckye'Murika

Edited by Xellah, 05 July 2015 - 03:30 PM.

  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#1263 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 10 July 2015 - 07:07 PM

Have some hardcore pistol porn:


Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

About 100 hours of work total.

No, you can't have one. This one is for Psyk, and was commissioned 3 years ago as of tomorrow.

Dropbox link to all the parts if you happen to have access to a waterjet, sheet metal equipment, powder coating stuff, a lathe, a mill, a CNC router, a 3D printer, and you happen to be really, really masochistic because they're kind of a lot of work.

I wouldn't expect anyone who can't figure out how to make it based on the CAD models to have access to the tools necessary to build one from scratch. I won't be selling kits or parts for these unless you throw a LOT of money my way.
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#1264 KaneTheMediocre

KaneTheMediocre

    Belligerent Asshole

  • Members
  • 613 posts

Posted 16 July 2015 - 12:37 AM

Posted Image
Posted Image

The hoppered blowgun on top is awesome, and has ample ammo storage with a spare clip and a quick-reload tube. The 6-spot, manually indexed shotgun revolver thing on the main P-scrt output looks super cool, fires well, and points in a varied and completely different direction than the blaster, making it useless in practice. I took the revolver off after these pictures were taken.

The PullSCT that this was built on was originally modified (and mostly built) by Ryan with a manual revolver for demolisher rockets, but he abandoned the project, since those are too expensive and don't really work with our barrels after use with an actual demolisher. I tried to salvage it by turning it into a shotgun revolver and adding the blowgun.
  • 0
RAINBOW CLAN FTW
I'm Purple

My Half-Baked MHA Site

#1265 3DBBQ

3DBBQ

    Member

  • Members
  • 214 posts

Posted 17 July 2015 - 01:28 AM

*
POPULAR

hi, this is my works:
2015 jspb pro!
It took considerable time developing, and finally come out
1.system: air Compression ,2 pumps
2.rage: 75 feet
3.ammo: 12mm nerf darts,stefans dart,zlin darts
4. inline clip store 4darts

Posted Image

Posted Image

Posted Image

Posted Image

Edited by 3DBBQ, 17 July 2015 - 03:01 AM.

  • 2

#1266 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 18 July 2015 - 05:29 PM

#StayClassy

Posted Image

Posted Image

Posted Image

Actual Rainbow pistols:

Posted Image

Only because it looks cool:

Posted Image

Edited by Xellah, 03 August 2015 - 09:46 PM.

  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#1267 KaneTheMediocre

KaneTheMediocre

    Belligerent Asshole

  • Members
  • 613 posts

Posted 20 July 2015 - 08:14 PM

Video on youtube of the Plusblow 5 and Plusblow 5N

The Plusblow 5 and Plusblow 5N, pictured next to each other:
Posted Image
The Plusblow 5 fires Buzzbee suction darts, and the Plusblow 5N fires Nerf elite darts and streamlines. Obviously, the Plusblow 5 shoots farther and more accurately, but most people have more elite/streamline darts so I try to accommodate.

The mouthpiece on the 5N turned out much better thanks to dry filament:
Posted Image

edit: Thingiverse pages for Plusblow 5 and Plusblow 5N

I also did a video showing an easy-to-build hoppered HAMP firing both marshmallows and silicone dome darts.

Edited by KaneTheMediocre, 20 July 2015 - 08:16 PM.

  • 0
RAINBOW CLAN FTW
I'm Purple

My Half-Baked MHA Site

#1268 EocDragon

EocDragon

    Member

  • Members
  • 14 posts

Posted 30 July 2015 - 02:05 AM

Prepped and ready for Apoc:
Posted Image

I started this project with the hope of creating a mostly 3D printed pump-action primary. I was mainly looking for two things: easy to manufacture and to hit the century mark and this blaster does both, though it definitely has room for improvement. This blaster is essentially a SCRT design modified for pump-action.

Facts about this blaster:
All of the internal parts and mechanisms are 3D printed. Total print time for all the parts is ~27 hours.

NerfoMania and I assembled the blaster in about 4 and a half hours, which included all the body measurements and cuts as well as two plunger rod iterations. I'm reasonably sure that with some practice the blaster could be assembled in around 3 hours.

The blaster is 25.5" long. It's comfortable to hold as is; that being said, there is a lot of waste in the SCRT design. The front bushing is almost twice as long as it needs to be, the plunger head is larger than it really needs to be, and the handle is about 1/2" too long both above and below the trigger. The front halfpipe is completely unnecessary and the back end could be shaved down slightly. If I so chose, the second iteration could probably be under 2' long.

Posted Image

I originally started with a [k25], but the spring's performance was slightly disappointing range-wise. I upgraded to a [k26] with no trouble fit-wise, although it caused some mostly superficial wear to the first plunger head. I modified the design and printed it at 100% fill, and if it continues to give me issues, I'll print it in a carbon fiber composite I got in. The [k26] is almost full compression and got me to the century mark before the front seal was finalized.

Posted Image

I may have misread the diagrams, but I believe that the original SCRT design had the front bushing entirely mechanically fastened. This would have made the blaster magnitudes easier to service, but I had a small leak in my setup; not enough to be non-functional, but enough to impact ranges and bother me. I gooped the front bushing in tonight, which should improve the seal to acceptable levels. I also removed one of the two O-rings in the front, which I felt was no longer necessary.


Overall, I am impressed with how the blaster came out, and I'm excited to put it through its paces at Apoc.
  • 0

#1269 KaneTheMediocre

KaneTheMediocre

    Belligerent Asshole

  • Members
  • 613 posts

Posted 17 August 2015 - 09:57 PM

I just arrived in Spokane on Saturday, and I made my first hardware store run. Since I found some Rival balls on Sunday, I thought making a hopper for them would be a nice and easy first project.
I don't have access to most of my tools, and I don't have a place to work, so I just did this in the parking lot at Ace with what I could find there.

Posted Image

Posted Image

Posted Image

It works, but the performance is not great. I don't have a stock blaster for comparison, but I'm betting the farthest shots (which went ~20m) have about the same power as the stock blasters, and some of them only travelled about half that distance. I think much of the inconsistency has to do with there being too much room for the ball, so it doesn't consistently seat in the same place, let alone against the barrel.

The magazine is 1" PVC conduit, and could stand to have a smaller ID to reduce deadspace and better locate the balls. The barrel is 3/4" EMT conduit, and seems to have a tight but not absurdly tight fit, however since it's such a pain to cut, I couldn't really experiment to optimize barrel length. Duct tape was used to make it fit in the 3/4" PVC T fitting that I used, and the back of the T was cut so that the 1/2" to 3/4" bushing would press all the way into the stop of the fitting to reduce the amount of space for the ball to mislocate. I'm curious to see what other people are doing for Rival hoppers, for some reason no one has posted anything that I've seen. There's certainly room for optimization, and 3/4" thinwall PVC might be better for the barrel (or even the magazine, I'm not sure how it would fit as they didn't have the stuff here and I didn't bring any).
  • 0
RAINBOW CLAN FTW
I'm Purple

My Half-Baked MHA Site

#1270 Langley

Langley

    LGLF - Since 2002

  • Administrators
  • 2,997 posts

Posted 28 August 2015 - 03:28 PM

Posted Image
Posted Image
Posted Image

Forgot to post these photos from before Apoc. Stripped the stickers and craft foam off the stock, sanded it, and added some oak trim to the butt to make it a little more comfortable. Rubbed the wood with linseed oil to protect it. Re-wrapped the pump handle with paracord.

The prettier this thing gets, the worse it shoots. I think at some point I made a change to the fasteners on the plunger head that fucked up the seal, because I've been going through washers faster and faster. I might try to stick a skirt seal on it, just because I've sunk so much time into it already.
  • 0

You can poop in my toilet anytime champ.

2016 Nerf War Schedule
Bless you, my son. Now recite 3 New Members Guides and 5 Code of Conducts for your sins.


#1271 Gears

Gears

    The boy who lived

  • Members
  • 848 posts

Posted 02 September 2015 - 03:01 PM

Personal PSCRT
Posted Image
  • 0


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#1272 Drev

Drev

    Member

  • Members
  • 135 posts

Posted 03 September 2015 - 04:50 PM

Made this a while ago for a guy.
Posted Image
  • 0
Check out my blog: Fly Nerf

#1273 Birch

Birch

    Member

  • Members
  • 181 posts

Posted 03 September 2015 - 10:12 PM

New rainbow.

Posted Image

Great seal, just some excess friction from the catch. Only around 200 fps, should be able to increase that with some filing and sanding of the catch and support plates, but nothing is certain.

Handle for my next rainbow, it is rather unique so I thought it deserved posting.

Posted Image

Polycarbonate is flush with the wood for optimal smoothness on the handle, i.e. no plates sticking out into my hand. The plates also make for the installation of a 1/4 inch wide trigger easier, eliminating the need for spacers.

Posted Image

Edited by Birch, 03 September 2015 - 10:15 PM.

  • 0

It's like a Hurricane ate a Tornado and shat out a Monsoon!!


#1274 Birch

Birch

    Member

  • Members
  • 181 posts

Posted 06 September 2015 - 12:06 PM

New Rainbow

Posted Image

[k25], 8 inches of draw, great seal. Shoot ~270 fps with the barrel shown below, 240 with a 8 dart hopper.

Posted Image

Supa Leet 3-stage optimal barrel.

Posted Image

~7 inches of tight CPVC, ~8 inches of looser CPVC, ~4 inches of PETG. Total length of ~19 inches.

Edited by Birch, 06 September 2015 - 06:19 PM.

  • 0

It's like a Hurricane ate a Tornado and shat out a Monsoon!!


#1275 ilikefish58

ilikefish58

    Member

  • Members
  • 86 posts

Posted 04 October 2015 - 05:26 PM

Did some maintenance and finally got around to painting my Rainbow Longstrike
Posted Image
Posted Image
Posted Image
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users