[ChiliPepperFender]

Ok, I'd like to give all the credit to imaseolman's Marvelous Salvo, I'm pretty sure this can also work with hornet tanks also because of the way they are built. Anyway, if anyone needed a short easy way to do it with pictures, read this writeup.

First, get your Big Salvo:


Now open it up:


After that cut off 3 barrels leaving enough tubing so you can add tubing connectors/ barbed fittings:


Ok, now get you SMDTG:


Open it up and take out the internals. Cut off the orignal barrels as well as the pump. Again, leaving enough space for tubing connectors/ barbed fittings. Here's the SMDTG and the Big salvo internals:


Lastly, get a pump and tubing connectors/ barbed fittings. Pretty obvious on what to do from here, but here's a picture:


I used an AT2K pump, but I'm sure others would work. Once again thanks to imaseolman for thinking up this idea as well as answering a few questions a while back.

Questions, comments, flames?

[P.C. III]

Nice. How many pumps does that take? Where did you get those connecters?

[ChiliPepperFender]

It's an AT2K pump and I plugged it. It takes around 20 pumps untill it is hard to pump. I got the tubing connectors at Home Depot, they are 1/4"OD(1/8"CTS). I bought around 10 of them so I'm pretty much set.

[P.C. III]

So you just screw them around the tubbing?

So you just screw them around the tubbing?

[keef]

They are $1.30 by me. Very high priced.

You just shove in the tubing and it works.

Nice job!
It works with hornets too, you just can't use the SMDTB pump.

This post has been edited by keef: 25 May 2008 - 09:29 PM

[ChiliPepperFender]

 P.C. III, on May 25 2008, 10:25 PM, said:

So you just screw them around the tubbing?

The Big Salvo barrels? Yes.

[Forsaken_angel24]

Killer integration material!
I will most likely be doing this in the future.
Are the ranges still similar to the big salvo with the smaller valve on there?

I don't even know where to classify this in the directory? Anyone got any ideas?

This post has been edited by Forsaken_angel24: 25 May 2008 - 10:14 PM

[ChiliPepperFender]

 Forsaken_angel24, on May 25 2008, 11:13 PM, said:

Killer integration material!
I will most likely be doing this in the future.
Are the ranges still similar to the big salvo with the smaller valve on there?

I don't even know where to classify this in the directory? Anyone got any ideas?

Yeah, I'm still debating on wheather to put this on my crossbow or sawtooth. I've had this done for a while now but I haven't range tested. Again, imaseolman who made this, said that he was getting around the 100's in his thread. So I'm guessing I'd be getting around the same with PETG barrels.

For the directory thing, you could put it under integrations for both the Big Salvo and the SMDTG. Even though it's not actually another gun inside of another.

I just noticed, 3 writeups in 3 days! Expect that streak to end tommarow.

This post has been edited by ChiliPepperFender: 25 May 2008 - 10:47 PM

[OfAllTheNerf]

Very nice. Like you aid imaseoulman made this already, but its always nice to have a writeup. Would you be willing to sell one of those connectors? I'll pm you.

[Captain]

Wait, so is the object of this mod replacing the trigger with a more reliable one?

[P.C. III]

Mainly a smaller-more comftorble one, so yes. You loose a barrel though.

[ChiliPepperFender]

 Captain, on May 26 2008, 03:21 PM, said:

Wait, so is the object of this mod replacing the trigger with a more reliable one?

That and making it very easy to integrate to anything.

[Forsaken_angel24]

Listed as

Quote

::SMDTG combo Big Salvo dream integration.

Under Big Salvo and SMDTG.