Jump to content


Photo

Guide To Barrel Material


229 replies to this topic

#1 J cobbers

J cobbers

    Member

  • Members
  • 586 posts

Posted 19 October 2005 - 05:29 PM

This topic is to point out what barrel materials usually used for modding nerf guns.

If you are new to the art of barrel replacements read this article by Cxwq. It should answer most of your questions and is a good starting place.

If you have further comments on or links to barrel modifications this is the place to post them. The idea is to have one place to answer questions on the subject without making new and redundant topics we've read more times than we care to.
  • 0

Don't forget to eat your meat based vegetable substitute children.


#2 Starsnuffer

Starsnuffer

    Member

  • Members
  • 24 posts

Posted 16 November 2005 - 05:37 PM

How does adding a PVC coupler to the end of an air chamber make it breech loading? is there a slit in the side of it or something?
  • 0
I'm just a newb, don't hurt me.

#3 Nerferc

Nerferc

    Member

  • Members
  • 113 posts

Posted 16 November 2005 - 06:48 PM

Well, the coupler allows you to pull the barrel off, put the dart in, and put the barrel back one. This allows you to reload without having to ramrod the dart in. That's how it works.
  • 0
Eagles may fly, but weasels don't get caught in jet engines.

Save gas, fart in a jar.

Formerly known as Nerfnoobc.

#4 Mattf

Mattf

    Member

  • Members
  • 41 posts

Posted 07 February 2006 - 09:27 PM

If anyone would post what sizes of PVC and brass they recommend for micro stock and micro stefans, I'd be eternally grateful of them / willing to donate blood to them / appreciative.
  • 0

#5 Mattf

Mattf

    Member

  • Members
  • 41 posts

Posted 07 February 2006 - 09:29 PM

If anyone would post what sizes of PVC and brass they recommend for micro stock and micro stefans, I'd be eternally grateful of them / willing to donate blood to them / appreciative.

I thought it'd be 1/2" for the CPVC and a bit more for the brass, but nothing fit my darts.

*insert extremely sad face*
  • 0

#6 Maverick Master

Maverick Master

    Member

  • Members
  • 142 posts

Posted 08 February 2006 - 07:02 PM

I know this is an old topic but i didn't want to start a hole nother topic for just one question, any way.

I was just wondering why copper dosn't work good for a barrel. I've all ready heard the story about copper is the stuff that comes from inbettween your grandpas legs but other than that i really don't know.
  • 0
Cpt. Brian Scott of UGNS

Under
Ground
Nerf
Squad

Alias Scoped loser (+)
(.)(.) :)

LordofTheRings434
"In a sense, what I'm saying is that you shouldn't waste your time handling your balls. Go for the foamy rods instead."

#7 cxwq

cxwq

    Member

  • Founders
  • 3,634 posts

Posted 08 February 2006 - 07:59 PM

I'm going to just pretend that I didn't read the last sentence...

Use the barrel material that fits your darts. Period.

If you're using stock micros, 1/2" SCH40 PVC fits the tips nicely and 9/16" OD K&S brass or crayola markers or .55" ID PETG will do for the body.

If you're using stefans, nothing I say will help you because your foam isn't the same size as mine. Take a piece of FBR to the hardware store and start hunting. Then take it to the hobby store and do the same. Chances are you'll find something that works.
  • 0
<meta name="cxwq" content="mostly water">

#8 yourmomsanerfer

yourmomsanerfer

    Member

  • Members
  • 43 posts

Posted 17 February 2006 - 10:52 AM

whats the main difference between the use of petg and cpvc? I know that the petg is thinner but how and why does it affetc the stefans?
  • 0
tag! no tag backs

#9 Hotness

Hotness

    Member

  • Members
  • 18 posts

Posted 15 March 2006 - 01:48 PM

I would recomend the use of hollowed out crayola markers inside a length of 1/2" SCH40 PVC for guns that use stock micros.
  • 0
Holla Holla Hotness Nerfwhores!
Proud to be a member of the Wolfpac and co-captain the Empire

#10 J cobbers

J cobbers

    Member

  • Members
  • 586 posts

Posted 16 March 2006 - 02:05 PM

whats the main difference between the use of petg and cpvc? I know that the petg is thinner but how and why does it affetc the stefans?

It's clear, lighter, easier to cut and can be ordered in sizes that more exactly fit your foam backer rod. Generally however finding it requires you to custom order it or get some from someone who has, were as PVC and CPVC can be had at most any hardware store.
Because you can match it to your FBR that you use for stephans allows superior performance in valve based guns where you want a perfect fit rather than the tight one you want for a spring gun.
  • 0

Don't forget to eat your meat based vegetable substitute children.


#11 z80

z80

    Member

  • Members
  • 603 posts

Posted 16 March 2006 - 03:32 PM

I would recomend the use of hollowed out crayola markers inside a length of 1/2" SCH40 PVC for guns that use stock micros.

Ive used that on my AT2k, LBB and NF. Works great with matchsticks too.
  • 0

#12 Shadow 92

Shadow 92

    Member

  • Members
  • 193 posts

Posted 28 September 2006 - 01:22 PM

I've got a question. If you replaced a spring in, say a Big Bad Bow, would you need a longer barrel than normal to compensate for the plunger's accelerated speed? Would the same concept apply to pump guns as well, swichting from a ballvalve to a sprinker valve because the air is also moving faster? And shouldn't nested brass barrels always be used in spring guns as opposed CPVC?
  • 0

#13 Shadow 92

Shadow 92

    Member

  • Members
  • 193 posts

Posted 06 January 2007 - 10:24 PM

I've got another question. I just ordered some 0.5" ID PETG from McMaster and realized that its ID is too small for my darts. My question is; Can I use a 9/16 drill bit to widen the ID on the PETG even though it will leave 1/16” of space with it’s 5/8 ID? If not is there any other way to evenly widen it?

(Sorry for the double post)
  • 0

#14 nerfer34

nerfer34

    Member

  • Members
  • 1,594 posts

Posted 06 January 2007 - 10:50 PM

That's what I'm thinking.....

If you can find a 9/16 drill bit, LET ME KNOW!

But yes, I believe you can.
  • 0
<!--quoteo--><div class='quotetop'>QUOTE</div><div class='quotemain'><!--quotec-->God Damn it Groove, you stole my kill.<!--QuoteEnd--></div><!--QuoteEEnd-->-OMC

#15 Shadow 92

Shadow 92

    Member

  • Members
  • 193 posts

Posted 07 January 2007 - 12:12 AM

Thanks nerfer34. I found several 9/16 drill bits at Lowes and Home Depot and combined with the bit extensions, I should be able to drill all the way through the barrel.
  • 0

#16 Sinewav

Sinewav

    Member

  • Members
  • 7 posts

Posted 19 February 2007 - 12:36 PM

What are the advantages/disadvantages I should know when choosing between brass and aluminum?

It seems that most people here like to use brass, but I'd like to know why. I'm placing a large order on McMaster and aluminum is a heck of a lot cheaper. I'm not opposed to ordering the brass if it's significantly better in terms of performance, but I can think of a lot of things that I'd like to do with the money I'd save on the aluminum.
  • 0
Jose, can I have permission to fire?

#17 Retiate

Retiate

    Member

  • Members
  • 778 posts

Posted 19 February 2007 - 01:11 PM

The reason brass is much favored for a barrel replacement is because it comes in such small increments. You can find a good fit for your darts, since they come in increments of 1/32. Aluminum comes in very little sizes and I think it's a bit heavier due to thicker walls. I've never used aluminum before, but I know several people have. Go to the store and see how well your darts fit in aluminum. If it's a nice fit, then great, aluminum will work for you.
  • 0

#18 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 29 March 2007 - 01:00 PM

I might as well share this discovery. I found some aluminum structural tubing in the mcmaster catalog that has the same ID as 9/16" brass, 1/2" CPVC, and PETG. It's also fairly cheap (compared to brass).
1658T49 - Alloy 6063 Aluminum Round Tube .625" OD, .527" ID, 8' Length = $7.41 Each

It's pretty thick so it's durability should be excellent. Just as smooth as brass, but should prove easier to work with and won't tarnish. The outer diameter is 5/8".
I plan to use it in some in some upcoming projects.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#19 RaZeR ShArP

RaZeR ShArP

    Member

  • Members
  • 152 posts

Posted 29 March 2007 - 04:45 PM

Sorry for the retarded post, but could you link us to that tubing? I searched mcmaster and I didn't see it...
  • 0
"If only you could upgrade to a bigger one. Double the length and watch as others cower in fear of your balls." -Shadow Hunter Alpha

"I had just used some silicone spray on the plunger, and saw a nice increase in range. So I told my wife that lubing up makes my balls shoot further." -Carbon

#20 SHADOW HUNTER ALPHA

SHADOW HUNTER ALPHA

    Member

  • Members
  • 1,116 posts

Posted 29 March 2007 - 04:46 PM

I found some aluminum structural tubing in the mcmaster catalog that has the same ID as 9/16" brass, 1/2" CPVC, and PETG.

I assume that we could substitute this aluminum in mods like FA24's Longshot. I don't see why the performance would be any different.
  • 0
The only commonly shared fate among us all is death. I turn to the shadows so that I may not be unfamiliar with hell's corridors when I arrive. - SHADOW HUNTER ALPHA

Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.

#21 Retiate

Retiate

    Member

  • Members
  • 778 posts

Posted 29 March 2007 - 04:59 PM

Forsaken Angel's Lonshot mod had to use brass. Unless the aluminum Has increment sizes that small, it won't work because they won't slide over eachother for that perfect seal.
  • 0

#22 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 29 March 2007 - 07:25 PM

The aluminum wouldn't be useful for FA24's method since that relies upon the bolt face sliding over the receiver. You would have to find an alternative arraignment (which would probably require lathe work) in order to use aluminum.

Sorry for the retarded post, but could you link us to that tubing? I searched mcmaster and I didn't see it...

I can't directly link to anything in the Mcmaster catalog. Search for part# 1658T49

Edited by CaptainSlug, 29 March 2007 - 07:26 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#23 SHADOW HUNTER ALPHA

SHADOW HUNTER ALPHA

    Member

  • Members
  • 1,116 posts

Posted 29 March 2007 - 08:27 PM

The aluminum wouldn't be useful for FA24's method since that relies upon the bolt face sliding over the receiver. You would have to find an alternative arraignment (which would probably require lathe work) in order to use aluminum.

Right. Didn't think about that...

However, the aluminum would be useful for the barrel of, say, a Crossfinder?
  • 0
The only commonly shared fate among us all is death. I turn to the shadows so that I may not be unfamiliar with hell's corridors when I arrive. - SHADOW HUNTER ALPHA

Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.

#24 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 29 March 2007 - 10:41 PM

It would be useful for anything where you want a very durable long barrel. I mean, if you compare it cost wise to CPVC you get

5 feet of 1/2" SCH80 CPVC = $ 6.51
8 feet of aluminum tube (.527 ID .625" OD) = $7.41

So for an extra dollar you get three more feet, plus it will look much cooler and be easier to drill mounting holes for since it's 5/8" OD.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#25 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 30 March 2007 - 01:59 PM

Yeah, aluminum is hard to find up my way. Brass is pretty easy to find in the larger towns/small cities, but PETG is really hard to find, it seems that most pet suppliers won't carry it. One store showing promise is primarily into aquatic pets, so for anybody out there looking for some local PETG, check pet stores with alot of aquatic life.

Edited by Prometheus, 30 March 2007 - 02:00 PM.

  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users