Jump to content


Photo

Buzz Bee Rogue Mod


16 replies to this topic

#1 Eraser475

Eraser475

    Member

  • Members
  • 99 posts

Posted 30 November 2011 - 08:46 PM

I'd never seen a write-up for this before, so I thought I'd give it a try.

Materials:
1. 10" of CPVC

2. Hot glue gun/ hot glue

3. Buzzbee Rogue

4. 30-45 minutes of your time.

5. Scroll saw/ band saw

6. Small screwdriver

7. Flat file

First, take your 10" piece of CPVC and cut it into 4 x 2 1/2" pieces:

Posted Image

Then, open the blaster and take the turret out.

Next, chop the retarded stock barrels off of the turret so it looks something like this:

Posted Image

Take a flat file and smooth down the stubs on the center posts and the former spots of the barrels:

Posted Image

Next, take your pieces of CPVC and start gluing them onto the turret like so:

Posted Image

After all 4 barrels are glued on, it should look something like this:

Posted Image

Place the turret back in the blaster:

Posted Image

Close the blaster up and you're done!

Posted Image

Average range: 50 feet

Edited by Eraser475, 30 November 2011 - 09:19 PM.

  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#2 ChaosPropel

ChaosPropel

    Member

  • Members
  • 586 posts

Posted 30 November 2011 - 08:53 PM

Great job, I'll be trying this mod, and a few others, on the Rogue I got for 4 bucks from the grocery store. I suggest something like epoxy or goop for attaching the barrels to the turret?

Edited by ChaosPropel, 30 November 2011 - 08:53 PM.

  • 0
Preheat oven to 350 degrees F (175 degrees C).

#3 Eraser475

Eraser475

    Member

  • Members
  • 99 posts

Posted 30 November 2011 - 09:06 PM

Yes, epoxy an/or goop would be a better choice, but I have no leaks as of yet. I will goop it eventually.
  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#4 ChaosPropel

ChaosPropel

    Member

  • Members
  • 586 posts

Posted 30 November 2011 - 09:07 PM

Yes, epoxy an/or goop would be a better choice, but I have no leaks as of yet. I will goop it eventually.

It's not leeks I'm worried about, it's structural integrity.
  • 0
Preheat oven to 350 degrees F (175 degrees C).

#5 The Irresponsible Toymaker

The Irresponsible Toymaker

    Member

  • Members
  • 9 posts

Posted 30 November 2011 - 09:10 PM

First off, cool! I've always like how this blaster works/looks, I've always felt that this blaster is just a little bit different, which unfortunately, most N-Strike and Nerf blasters nowadays seem to lack, IMHO (They're great performance blasters, at least some of them, just that they all feel cookie-cutter-ish), but that it just hasn't gotten nearly enough love from the modding community.

However, hotglue is NOT a great way to attach stuff. Unless you put on way more than what seems to be there. Echoing ChaosPropel, epoxy would be a great idea, as, when done correctly, makes a very tough bond, as leaks are not a problem with either epoxy or hotglue.

Also, just fyi, it's the "Rogue", not the "Rouge". Rouge is what women put on their cheeks to make them look red; rogues make people red. With blood. ;)
  • 0
"Babies are natural zombie killers-- it's in their blood."

#6 mysterio

mysterio

    Member

  • Members
  • 249 posts

Posted 30 November 2011 - 09:15 PM

Great mod, I would suggest increasing the seal and checking if there's a secondary catch on these like the tek 6's.

/parrot. Use goop, then hot glue if you feel like it.
  • 0

If two powerful is a problem then just go with one powerful. I guess this style of hopper will work even beyond three powerful..


15:46 *** Buff is now known as TheGdiddler
15:51 TheGdiddler I'M GONNA GRAPE YOU"

#7 Eraser475

Eraser475

    Member

  • Members
  • 99 posts

Posted 30 November 2011 - 09:18 PM

@ Chaos: Goop is really flexible and not very stable IMO. I think epoxy would be the way to go.

Edited by Eraser475, 30 November 2011 - 09:18 PM.

  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#8 HappyBurnination

HappyBurnination

    Member

  • Members
  • 26 posts

Posted 30 November 2011 - 09:19 PM

Given how short the barrels are, what he did is probably fine adhesive-wise. Of course, there's never any harm in hotgluing the hell out of it.
  • 0
"Insert barely clever dual nerf/sexual comment here."
WHITE WHALE, HOLY GRAIL
Split your lungs with blood and thunder.

#9 Eraser475

Eraser475

    Member

  • Members
  • 99 posts

Posted 30 November 2011 - 09:27 PM

Given how short the barrels are, what he did is probably fine adhesive-wise. Of course, there's never any harm in hotgluing the hell out of it.


If you do molest it with hot glue, Make sure to avoid the middle screw.
  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#10 nicholasy11

nicholasy11

    Member

  • Members
  • 48 posts

Posted 30 November 2011 - 09:48 PM

I like this. It's a very simple and effective mod. 4 50 foot shots seems pretty good for a cheap blaster such as this one and I can see it as a good side arm in indoor and moor arena like fields.
  • 0
In a snowman's world,
eyes are burned to power trains,
noses grow in the ground,
and flesh rains from the sky.

#11 agc2k

agc2k

    Member

  • Members
  • 113 posts

Posted 01 December 2011 - 08:14 AM

Nice job. I will have to get a rogue and try this.
  • 0

#12 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts

Posted 01 December 2011 - 08:40 AM

I really like this. With some fortifications and additional improvements, you've got a mini-quadshot on your hands.

Are you aware of springs that would fit inside the PT? Rather, what is the ID of the PT?
  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#13 Exo

Exo

    Member

  • Members
  • 391 posts

Posted 01 December 2011 - 11:47 AM

I did this, but differently, but that's not the point. It's a "good" gun, and it works.

My problem with this gun is that it's uncomfortable as hell, especially the prime.

My other problem with the gun is that the catch peice is super-weak, and will definately require reinforcements if you plan upgrade the spring.
  • 0

#14 Eraser475

Eraser475

    Member

  • Members
  • 99 posts

Posted 01 December 2011 - 04:51 PM

@ Aeromech: I think the plunger tube is a little < 1" in diameter. I'm not entirely sure of a spring that would fit, but the one that is already in there is very beefy.
  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#15 Aeromech

Aeromech

    Member

  • Moderators
  • 434 posts

Posted 01 December 2011 - 10:04 PM

I did this, but differently, but that's not the point. It's a "good" gun, and it works.


Exo: What did you do with your Rogue? Do you have any pictures left over from the build?

EDIT: For brevity.

Edited by Aeromech, 01 December 2011 - 10:06 PM.

  • 0
Watch my shitty videos

This is so ghetto but so awesome.


#16 Exo

Exo

    Member

  • Members
  • 391 posts

Posted 02 December 2011 - 02:15 PM

Exo: What did you do with your Rogue? Do you have any pictures left over from the build?


I rarely take pictures of stuff, mostly because my camera has such a limited memory, and I don't get many chances to upload my stuff. This is a tek 3, but the technique to attatch the barrels was the same.
Posted Image
Posted Image

I just used epoxy goo to secure the barrels to the posts, and they're pretty airtight.
I also got rid of that yellow grip.

I agree that this thing doesn't need a spring. The one I put in there made it WAY too hard to prime, which just made the horrible ergonomics that much more noticible.

It might be possible to make it rearloading, and it would probably benefit from the airflow expansion.

Also, just look at my signature. I turned mine into a couplerable turret when I discovered that.

Edited by Exo, 02 December 2011 - 02:17 PM.

  • 0

#17 mysterio

mysterio

    Member

  • Members
  • 249 posts

Posted 02 December 2011 - 03:24 PM

Do NOT make it rear loading. The turret is based off of a pin-lock system, like the tek 3, not a rotation mech like regular blasters.
  • 0

If two powerful is a problem then just go with one powerful. I guess this style of hopper will work even beyond three powerful..


15:46 *** Buff is now known as TheGdiddler
15:51 TheGdiddler I'M GONNA GRAPE YOU"


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users