Jump to content


Photo

Homemades Picture Thread

Photos of Homemade Nerf Guns

1306 replies to this topic

#801 BOSS9

BOSS9

    Member

  • Members
  • 137 posts

Posted 23 February 2012 - 12:08 AM

This has been my primary since my second war.
Posted Image
Functions very smoothly, priming system is bitchin, and it's super melt-in-your-hands comfy.

Slightly more recent project.
Posted Image
Rainbow in an Xploderz shell. This shit is over 4 feet long!
The shell sucks of course, but all the fabricated components are fantastic.
Built this one for outright power, using the plusbow method. (There's a reason Plusbows are known for being more powerful than any other 1 3/8" PT [k26] powered homemades. Can you figure it out?)

Group shot! Current homemade primaries.
Posted Image
On the bottom is my wicked awesome shotgun HAMP, 5-7 darts per shot, crazy draw=crazy range. Ask a Minnesotan how this does in DTC.
  • 0

#802 Shoopy

Shoopy

    Member

  • Members
  • 208 posts

Posted 23 February 2012 - 09:26 PM

Look Hero, I actually made a WORKING homemade! If you didn't know, this is a Snapbow Mk5. It has 7" of draw and a 90% seal. I made it in 4 hours with only one potty break and lots of music. I really enjoyed making it and can't wait to use it too! It's not 100% done. I will Goop the front coupler, upgrade the CPT, and maybe give it a pj. Here it is:
Posted Image

This is also a Snap pistol. Works OK. I really just made it to make sure I could make the Snapbow.
Posted Image
  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#803 ShaNayNay

ShaNayNay

    Member

  • Members
  • 254 posts

Posted 24 February 2012 - 06:07 PM

This is my first homemade gun. It's a blow gun that loads via a clip (since placing bullets in by hand is so overrated). Actually pretty easy to do. Thinking about making a CPVC/PVC one and doing a write up on it later (mine is made entirely of spare parts, that's why). It can also be loaded manually similar to a bolt action.
Posted Image

These are the parts. The barrel is a 2ft. copper pipe with a plastic casing I spray painted black. The Other part consists of the handle and dart loading chamber.
Posted Image

The clip slides onto the chamber and fits pretty tight. The darts enter through the hole I cut. When the barrel is pulled forward, the clip pushes one dart into the chamber. When the barrel is slid back, the dart pushed into the chamber is pushed into the barrel and loaded. It's very silent, gets 50-70 ft. range, and quite accurate.
Posted Image
  • 0

New Jersey is fuckin weird


#804 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 26 February 2012 - 09:34 PM

Did a bit of work on my pumpbow. Sports a 2ft chopper now.
Posted Image

Revshot for Jilliop
Posted Image
Posted Image
Posted Image
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#805 dapperrogue

dapperrogue

    Member

  • Members
  • 13 posts

Posted 27 February 2012 - 05:13 PM

L-Shot Rev 1 (left) and L-Shot Prototype (right). Bolt-action rifles that accept N-Strike mags, operating like a Longshot.

Posted Image

Prototype Video:
Rev 1 Video: http://www.youtube.com/watch?v=9wovA97NgBY

And here's the thread (detailed build of Rev 1 starts on page 2): http://nerfhaven.com...showtopic=22165
  • 0

#806 akira yakuza

akira yakuza

    Member

  • Members
  • 5 posts

Posted 28 February 2012 - 01:56 PM

What do you get when you cross a Walther Nighthawk CO2 pistol with a Double Eagle BB gun and a CB Antenna?
You get the Shinobi CO2-1.

I have managed to get back in a field to test the flat range and i am pleased to say that i got an average distance of 99.2', my max distance was 101' and my min distance was 98', i didnt mod the blaster any further i just modded stock darts which has made a difference of 20' and can withstand the power of a CO2 blaster, i am currently writing up a pdf for the darts which will soon be available upon request.

Posted Image

This is a CO2 powered single shot Nerf Blaster, it has a range of 99.2' flat, it features a 3-9x40 Telescopic sight and a red-dot laser sight.
Tech Specs:-
CO2 Capacity:12g (95 Shots)
Ammo: Red Arrow Spitfire (High Performance Nerf Darts)
Range: 99.2' Flat, >180' 30deg Elevation
Main Body: Walther Nighthawk CO2 Pistol
Barrel & Stock: Silver Rod CB Antenna and Double Eagle Bits.

This blaster would never be used in a Nerf War, it is a concept model for demonstration purposes only.

Edited by akira_yakuza, 13 July 2012 - 05:03 PM.

  • 0

#807 hamoidar

hamoidar

    Member

  • Members
  • 367 posts

Posted 29 February 2012 - 05:31 PM

Here is a description video of my version of Boltsnipers Fast Action Rifle. Two weeks of work really paid off :)

Edited by hamoidar, 29 February 2012 - 06:22 PM.

  • 0
NerfHaven > Your control panel > Profile > Change Signature > Inserts dumb sig > What! No pictures! > Inserts next best thing: http://nerfhaven.com...howuser=114052' class='bbc_url' title='External link' rel='nofollow external'>Best thing on Nerfhaven!

#808 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 01 March 2012 - 05:23 PM

Built a HEC3 yesterday. It hits really hard. Uses half a [k26], and a rubber washer+U-cup combo for a perfect seal. The trigger took a little work but it's catching 100% of the time now. However The prime feels heavier than the full length of my pumpbow's prime. Uses a 3/4" stock instead of a 1/2" stock for comfort and some +bow foam foam ghetto'd up to the back of it.

Posted Image

Into the PT
Posted Image

Edited by andtheherois, 01 March 2012 - 05:33 PM.

The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#809 Nate45

Nate45

    Member

  • Members
  • 74 posts

Posted 05 March 2012 - 04:01 PM

Posted Image

A traditional plusbow. It was my first polycarbonate homemade and I think it turned out pretty nice. Wooden Handle, 100% seal, 1/4" side plate.

Posted Image


Also, it has full compression.
  • 0

#810 Eraser475

Eraser475

    Member

  • Members
  • 99 posts

Posted 05 March 2012 - 04:52 PM

I was gonna make Darthmaker/Kane's "Wyeless Wye", But my local store ran out of PVC 45's. So I Improvised:

Posted Image

It is very sturdy for being just gooped together.
  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#811 TheSilentRebel

TheSilentRebel

    Member

  • Members
  • 172 posts

Posted 05 March 2012 - 08:32 PM

Made a couple of Pacbows:

Posted Image

One with a +bow catch, one with a rainbow catch. They both perform the same, but the Rainbow one was much easier to build. The one with blue bow arms is going to Keo, The other is mine. Each have 7.5 inches of draw.

Also made a Tornadobow X/2 a while ago:

Posted Image

DCNF 3 participants know how much I like my +bow...

Posted Image

Added a Thumbhole stock to this bad boy.
  • 0
We are men of action, lies do not become us.

#812 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 10 March 2012 - 01:07 PM

I was going to try and make a real homemade but then I got bored, and ordered several different (and more importantly, wrong) sizes of surgical tubing.

Tubes in tubes in tubes, man!

Posted Image

(This was when I was looking for a zip-tie to hold the tubing. I could not find one because this place is a disaster. However, drilling holes worked!)

Posted Image

Posted Image

Even with a disaster of a plunger head (fuck you Kane), three inches of draw (fuck you Ice9), and other weird, assorted problems, it shoots out of a hopper okay.

The end goal is to make a real gun that drops all the spring bullshit and compression distance out to make things more wieldy.

Posted Image

Gonna call it the TOUCH MY DANGUS blaster. Everyone else has to call it that, too.

MORE IMPORTANTLY IT'S THE FIRST ONE LIKE THIS, EDWARDS.

Mod party video!




http://youtu.be/KcVl0c0sgs8


http://youtu.be/yzx8SJHEN2Q

Edited by Ice Nine, 10 March 2012 - 11:57 PM.

  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#813 Shoopy

Shoopy

    Member

  • Members
  • 208 posts

Posted 10 March 2012 - 07:19 PM

This is a R2L I commissioned SlightlySane to make me. I gave it some upgrades. I made it pump-action and gave it my favorite pj, Orange, Black, and White. Ranges are 95-100 and can easily compete with a PumpSnap as RoF goes. I really enjoy it and will be my main primary at PNW>U. SlightlySane is a great commissioner and the R2L was super clean. Here she is:

Gun:
Posted Image

Slotted Plunger Rod:
Posted Image

Fully compressed k18 gives it great range and a light draw weight:
Posted Image

Money in the bank:
Posted Image
  • 0
You know you all want to crouch like a tiger...

PA POWER Clan Is that all ya got?

#814 Pointman9

Pointman9

    Member

  • Members
  • 131 posts

Posted 14 March 2012 - 06:22 PM

My first homemade springer was a success! A standard SNAPbow Mk. 5:

Posted Image
  • 0
There is no such thing as overkill. There is only cost efficiency.

#815 Nurf Doctor

Nurf Doctor

    Member

  • Members
  • 24 posts

Posted 14 March 2012 - 07:59 PM

Meh EPVAT Chimaera:
Posted Image
Super comfy and easy to pump. Both the EPVAT and pump are held on with copious amounts of hotglue, with zipties for the pump as well. As for ranges, gets over 250' with a 2' CPVC barrel and double bb stefans, and makes single bb hotglue dome stefans spin out at 70' with the same barrel. With a 7-shot absolver, gets around 70' with a 8'-10' spread. With my long 3-shot absolver, gets 100' with 5'-7' of spread. With my 19-shot absolver, gets 50'-60' with about 15' of spread.

Edited by Nurf Doctor, 19 April 2015 - 02:39 AM.

  • 0
"Spider, why you gotta be on my ceiling when I'm trying to sleep?"

#816 Craftsman

Craftsman

    Member

  • Members
  • 96 posts

Posted 15 March 2012 - 07:35 AM

Posted Image

Features:
-Internally seated bushing
-Cherry thumb-hole stock
-Lowered priming handle
-Single piece side plates
-Nearly every part has been modified from the original design

Soon to come:
-Square aluminum priming rod
-Foregrip
-Custom cherry & birch case

Please excuse my terrible pictures. I only have acess to a low quality camera. I will try to upload higher quality pictures in the future.

Edited by Craftsman, 02 August 2015 - 08:16 PM.

  • 0

Man keep finger on trigger receive painful finger bang!

Olde School Tacticool

All hail #YOLOStock!

 

I have taken a "break" from the hobby, but if you have anything crazy hit me up. I'm always interested in a challenge. Currently designing a nerf vehicle among other things.


#817 snakerbot

snakerbot

    Maker of Things

  • Members
  • 310 posts

Posted 19 March 2012 - 11:31 PM

I built a Tornadobow.
Posted Image

Yes, there's a reason for not having the trans-purple piece. And here it is:
Posted Image

Sexy, no?

And here it is with a 9-dart hopper.
Posted Image
  • 0

#818 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 19 March 2012 - 11:54 PM

It's like the midwest up in this bitch.

Posted Image
Posted Image

Built for Kevintsk of SG. It's an F5.
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#819 alugilaC

alugilaC

    Member

  • Members
  • 4 posts

Posted 22 March 2012 - 12:41 AM

Finished up my Pumpbow today:

Posted Image


I took bits of the PAPbow by Lt. Stefan and Ryan's Pumpbow that I liked best.

Posted Image
Posted Image


Mad props to Lt. Stefan for the catch and supa' comfy handle.
Uses 1 piece side plates and aluminum bar/UHMW priming system.

Posted Image
shoots a million feet.

*edit to avoid double-post*

Re-visited some old +bow related projects:

Posted ImagePosted Image

Split's +pistol design I made quite a while ago

Posted Image

Made a new comfy handle for my +bow

Edited by alugilaC, 23 March 2012 - 08:22 PM.

  • 0
There's nothing classier than some nice firm wood. - Stark

#820 hamoidar

hamoidar

    Member

  • Members
  • 367 posts

Posted 27 March 2012 - 04:19 PM

Here is my SGN-R3L, originaly built by Sgnerf. It has the exact spring he used. And gets about 100-120ft flat.
Posted Image

Posted Image
Custom handle.
Posted Image

Posted Image
Multiple catch points.
Posted Image
  • 0
NerfHaven > Your control panel > Profile > Change Signature > Inserts dumb sig > What! No pictures! > Inserts next best thing: http://nerfhaven.com...howuser=114052' class='bbc_url' title='External link' rel='nofollow external'>Best thing on Nerfhaven!

#821 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 03 April 2012 - 12:46 AM

Some recent work:

Posted Image

PumpSNAP with Raider furniture and 18 inch ported CPVC barrel.

Posted Image

Hits full compression with a full [k26], 7 inches of draw.

Posted Image

Here's the SNAPbow:

Posted Image

Wood thumb-hole stock and painted.

Posted Image

And finally an AaBow:

Posted Image

Posted Image

For those mainstream Nerfers that are wondering about the ball valve, it's supa-low resistance, Swiss-made. You've probably never heard of them.

[/Endhipsterexplanation]

Edited by Xellah, 03 April 2012 - 12:52 AM.

  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run


#822 Pointman9

Pointman9

    Member

  • Members
  • 131 posts

Posted 10 April 2012 - 06:50 PM

Second homemade springer, another SNAPbow MK.5.

Posted Image

Posted Image
  • 0
There is no such thing as overkill. There is only cost efficiency.

#823 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 14 April 2012 - 10:33 PM

+bow for ACNerfshop.
Posted Image
Posted Image
Posted Image

My new Pumpbow,
Before:
Posted Image

After:
Posted Image

Too many thumb holes, so I'm gonna try something different.
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#824 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 14 April 2012 - 11:37 PM

I made some major progress on my homemade Buzz Bee Big Blast trigger tonight. This is the third version of it that I've built. It improves significantly on the previous designs in these areas: Ease of construction, amount of material required for construction, limiting the variety of tools/materials needed, faster construction, less shell modification required, and lower cost. I have tested this trigger a fair amount, and it functions fantastically.

EDIT: These are now officially for sale, check my sales thread. They cost $9 each.

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Edited by venom213, 16 April 2012 - 07:44 PM.

  • 0

#825 Xellah

Xellah

    They call his chin.... Captain Underpants

  • Members
  • 178 posts

Posted 17 April 2012 - 01:33 AM

Posted Image

Recent posts about the Defender prompted me to finally modify my own. I prefer the grip and overall heft of this blaster over the Nite-Finder, and the spacious shell houses more of the plunger tube than a NF.

Posted Image

The cut out panels were inspired by Chops. I saw his a long time ago and thought they looked sweet so I tried it out. They could use some more sanding and smoothing.

Posted Image

Primed. 6 inches of draw with a 1" ID plunger tube. It does indeed shoot ropes.

Edited by Xellah, 18 April 2012 - 01:49 PM.

  • 0
Ultimator Duel

it cant be as bad as reloading an ak-47 on the run



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users