Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#3926 iamthatcat

iamthatcat

    Member

  • Members
  • 77 posts

Posted 30 January 2012 - 10:25 PM

Sooo much fun with shotgun loads. Tweaked my coupler/turret design a bit for power.

Posted Image

Magstrike integration tester/experiment.

Posted Image
  • 0

#3927 noodlenoggin

noodlenoggin

    Member

  • Members
  • 2 posts

Posted 31 January 2012 - 03:29 PM

This is my first post and first attempt at painting one of my Nerf blasters. I went for a simple army style with my lsfg.
I think I'm posting this in the correct place. If not, let me know so I can move it to where it belongs.

side 1
lsfg1

side 2
lsfg2

the front view(ish)
lsfg3
  • 0
just monkeying around

#3928 noodlenoggin

noodlenoggin

    Member

  • Members
  • 2 posts

Posted 31 January 2012 - 03:30 PM

This is my first post and first attempt at painting one of my Nerf blasters. I went for a simple army style with my longshot front gun.
I think I'm posting this in the correct place. If not, let me know so I can move it to where it belongs.

side 1
Posted Image

side 2
Posted Image

the front view(ish)
Posted Image

Edited by noodlenoggin, 31 January 2012 - 08:48 PM.

  • 0
just monkeying around

#3929 Z64052187

Z64052187

    Member

  • Members
  • 22 posts

Posted 31 January 2012 - 08:29 PM

Posted Image

Posted Image

Posted Image

Recon with Longstrike forend, PVC "tightbore", lighted handguard (incomplete), AR removal, and paintjob (also incomplete)

Edited by Z64052187, 31 January 2012 - 08:30 PM.

  • 0

#3930 Eik

Eik

    Member

  • Members
  • 120 posts

Posted 01 February 2012 - 01:16 AM

Finished my "Nomad" NF
- CPVC coupler
- 'iamthatcat'-style integration
- SSPB in the handle
- Tactical stickers

Posted Image

Posted Image

Probably gonna repaint it something cooler

Edited by Eik, 09 January 2014 - 12:04 AM.

  • 0

#3931 Ambience 327

Ambience 327

    Member

  • Members
  • 561 posts

Posted 01 February 2012 - 10:02 AM

Here is my modded Buzzbee Flintlock:

Posted Image

The write-up can be found right here.



Cost: $10.88 ($8.99 blaster, $1.54 springs, $0.25, $0.10 worth of Goop)

Time: Roughly 1.5 hours

Stock Ranges: 17'-22' (19' average)

Mods Done:
barrel replacement (CPVC endcap "coupler" for CPVC speed loaders)
spring addition
catch spring replacement

Modded Ranges:
Stock Darts: 25'-30' (27' average)
Slug Darts: 30'-35' (32' average)
  • 0
Foam in the Fort IV
The fourth exciting Nerf War in Fort Wayne, IN.

#3932 eklios

eklios

    Member

  • Members
  • 1 posts

Posted 01 February 2012 - 11:38 AM

Posted Image
the first stage of my tri barrel mav (first mod ever)
  • 0

#3933 Eik

Eik

    Member

  • Members
  • 120 posts

Posted 01 February 2012 - 08:12 PM

Batch of Reflex's/Eliminator for xmas gifts

Posted Image

Posted Image

Posted Image

Painted the internals of my Red+ Maverick

Posted Image

Tuned up my Recon

Posted Image

Posted Image

Edited by Eik, 09 January 2014 - 12:15 AM.

  • 0

#3934 TagMaster247

TagMaster247

    Member

  • Banned
  • 103 posts

Posted 02 February 2012 - 01:51 PM

Posted Image

Posted Image

Posted Image

Posted Image
Enjoy!!! :)

Edited by TagMaster247, 02 February 2012 - 09:17 PM.


#3935 ilikefish58

ilikefish58

    Member

  • Members
  • 86 posts

Posted 02 February 2012 - 08:28 PM

Posted Image

Posted Image

http://www.youtube.com/watch?v=5uiOFt-xww0
  • 0

#3936 Eraser475

Eraser475

    Member

  • Members
  • 99 posts

Posted 03 February 2012 - 09:00 PM

What my nitefinder...

Posted Image

...looks like under a blacklight:

Posted Image
  • 0
"That seems like substantially less fun than filling it with beer". -Draconis

"There is no such thing as over kill! If you can carry it and prime it. You're good to go". -Makeitgo

"Admin Edit: Dumbest Crossbow in existence. Congratulations!" <-- Admin in the Show off your crossbow thread.

#3937 iamthatcat

iamthatcat

    Member

  • Members
  • 77 posts

Posted 07 February 2012 - 10:42 PM

5 shot Jolt. It uses a light .8", looser fitting dart. It loads from the front. The 5th shot is a stroke of luck that worked when I tried shoving an extra (tight fitting) dart down the barrel. Ranges are 35',32',25',20' & 10' over grass (stock spring).
Posted Image

The nano is more consistent. My best, last shot (Rogue spring) landed at 24'.
Posted Image

Early pic of the wye.
Posted Image

Jolt tweaks.
Posted Image
A start on the sights for a Tek 3 turret. The curve added to the back of the turret allows you to prime with the o-ring exposed a bit, to get a better gulp of air & better range. The missile adapter is a piece of polyester(?). It was packing materials. The skeletonized trigger & barrel crenelation helps with aim.

This shows the removal of the stock back plate. It's slimmer & can be useful for integrations. Clear orange vinyl tubing & a shoelace for priming. Shaped up coupler. The small front profile/trigger is nice in the hand.
Posted Image

Turreted NF. Seal needs work.
Posted Image

Edited by iamthatcat, 15 February 2012 - 08:09 PM.

  • 0

#3938 andtheherois

andtheherois

    Member

  • Banned
  • 821 posts

Posted 11 February 2012 - 06:51 PM

Berserker for a friend
Posted Image
Posted Image

Semi-auto Salvo for Hoongfu
Posted Image
Posted Image

Twins, One's not so pretty cause the coupler was done by someone else and replaced by me. The other one was 100% stock when I received it, and was quickly modded for a Keo.
Posted Image

Two Double Shots I did for a friend for a Zombie walk. They're in my possession once again to be minimized further. A lot of work went into detailing them and making them look worn and used.
Posted Image
Posted Image
The YooToobz
Photobucket

Winning rounds is rewarding, deal with it. We don't play fucking patty cake over here.


#3939 ilikefish58

ilikefish58

    Member

  • Members
  • 86 posts

Posted 13 February 2012 - 04:11 PM

Posted Image

Posted Image
  • 0

#3940 thespankerlives

thespankerlives

    Member

  • Members
  • 47 posts

Posted 13 February 2012 - 10:47 PM

Posted Image

Edited by thespankerlives, 13 February 2012 - 10:48 PM.

  • 0

#3941 Eik

Eik

    Member

  • Members
  • 120 posts

Posted 17 February 2012 - 12:59 AM

Work in progress. Might make a write-up when it's complete.

Posted Image

Edited by Eik, 09 January 2014 - 12:08 AM.

  • 0

#3942 roboman

roboman

    Member

  • Members
  • 489 posts

Posted 21 February 2012 - 02:46 AM

(Finally) finished a 2K overhaul, complete with aluminum tank, for NerfNoob10.

Posted Image
Posted Image
Posted Image

It has the works - aluminum tank, coupler, speedloader, and pump head. I've taken it to 12 pumps so far and the tank has held up fine. It seems to like 7-9 pumps, for some reason. Of course, that means it's ridiculously powerful, too. Haven't had a chance (and won't get one) to test ranges, but it punches through cardboard easily.
  • 0

Youtube

LS and Retaliator boltsleds are currently available at https://www.facebook.com/RoboM8/


#3943 iamthatcat

iamthatcat

    Member

  • Members
  • 77 posts

Posted 21 February 2012 - 05:53 AM

Whoa! ^

Breeched and externally banded NF. The bands didn't give me too much range. I already had a strong spring. It did increase dart speed and accuracy. It finally got me to 100' too. A knot holds the bands to the priming rod. The priming rod is shaped to a sort of notch to hold the bands. I added foam and cloth tape to cushion both the priming rod and to keep the bands breaking. The cleat is CPVC. The front sight is the chopped up barrel from the stock NF (it works by clipping on).

Posted Image
Posted Image

Here's an SSPB with a NF grip following Solscud007 & Demolution from SGNerf.

Posted Image
Posted Image

Concept for the UMB pistol courtesy of Lein and his Switch Shot/SM 1500! Here is a pic of his in a beta stage. Mine is exaclty the same so I feel he should get the credit for this idea.

Posted Image

BB USB/BB UMB tank. 2 pumps gets 90' with stefans. Needs a new trigger and ergo tweaks but it's a lot of fun in a small package!

Posted Image
Posted Image

Unconventional? Maybe. Fuzzy pic? Yes. I have to sink the USB handle into the URB. I wanna try an air powered URB next!

Posted Image

Edited by iamthatcat, 04 March 2012 - 02:59 AM.

  • 0

#3944 BOSS9

BOSS9

    Member

  • Members
  • 137 posts

Posted 23 February 2012 - 12:07 AM

Finally got off my ass and took some pictures of stuff.

Posted Image
NiteFinder with 1 1/8" ID 1 1/4" OD plunger tube. 3" of draw, perfect everything, hits 110 with either the breech or the 9" speedloader. Not pictured: hours of dremeling and sanding the inside of the shell.

Posted Image
UMB. Actually my most reliable backup primary, it's a fucking rock. Shoots as far as my big blast currently, or as far as you want it to with the twist of a screw.

Posted Image
Soo fun. Tactical rail accessory that shoots farther than anything I can put it on? Hell yes!
  • 0

#3945 Eik

Eik

    Member

  • Members
  • 120 posts

Posted 23 February 2012 - 03:49 PM

Dropped OneWingedAngel's brass breech and polycarb catch into my 'Dino' longshot.

Posted Image

Posted Image

EDIT: Big ups to my lil Bro Eik2, I'm glad I finally got him to post that ShmexBow. No, he's not some poser FNG, we're actually related, and he did all that work himself!

Edited by Eik, 08 January 2014 - 11:52 PM.

  • 0

#3946 nomad01

nomad01

    Member

  • Members
  • 13 posts

Posted 25 February 2012 - 08:08 AM

Hope this works as I have no idea how to post pics here and there's nothing in the help file for the computer chalenged like me. These are pics of my modded praxis. I did the usual stuff on the inside so nothing new there. On the outside I got rid of the shotgun action in favor of a bolt action that I made useing a screw driver & so 2 part epoxy puty, mounted a modded secret strike with a 3 barrel turret from some Buzzbee blaster on the now free underside of the paxis' barrel, kit bashed 2 10 disc clips to make a 25 disc clip, made a 6 round N-strike clip into a 6 round railmounted ammo holder & gave the shell a paint job. I'm going to try to posts the pics I took bellow, if this doesn't work could some one please let me know how to go about posting pics? Thank you, nomad.

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image
  • 0

#3947 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 25 February 2012 - 01:07 PM

Skeptorr. Ropes. Mod party. Scrt.

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image


That barrel is way too short. Needs like fourteen inches of SCH80.

The only glue on the gun is on the bushing.

Super productive!

Posted Image
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#3948 Eik2

Eik2

    Member

  • Members
  • 1 posts

Posted 26 February 2012 - 02:15 PM

Here's my newly finished Shmallow bow. 1/2" PVC coupler, currently with a 9" Genova CPVC barrel. It has about 70 cu. in. of plunger volume. Stock internals otherwise, hits 100' with streamlines and about 110' with stefans.
::Edit:: This is my first post, and one of my first projects. I am the younger brother of Eik, if anyone was wondering.

Posted Image

Posted Image

Posted Image

Posted Image

Edited by Eik2, 26 February 2012 - 02:51 PM.

  • 0

#3949 SonReeceSonJensen

SonReeceSonJensen

    Member

  • Members
  • 662 posts

Posted 26 February 2012 - 07:53 PM

[quote name='Eik2' timestamp='1330283756' post='311893']
I am the younger brother of Eik, if anyone was wondering.
[quote]

I WAS! So thank you for that. Come to Marchtacular. Just sayin' cuz you'll seeeee.....

THIS!
Posted Image

Oh yeah.
Posted Image

Drink in up.
Posted Image

Drink it ALL up.
Posted Image

Some specs on the TacMantaThreek
Posted Image
Posted Image
Posted Image


JB Weld and hardware. Get to know them, make friends with them.
  • 0
The Difference:
-Guns shoot bullets that kill people
-Blasters shoot darts that tag people

I do not play with guns.

#3950 Smokin Joe

Smokin Joe

    Member

  • Members
  • 8 posts

Posted 26 February 2012 - 08:52 PM

First real post, my most recent NF. Has an extra spring that I found lying on my workbench.
Side Shot:
Posted Image
Front (with ammo holder hot glued in):
Posted Image
Money shot(and yes it is on a tie, I found it stood up very easily on it):
Posted Image

Edited by Smokin Joe, 26 February 2012 - 11:45 PM.

  • 0
I am become Nerf, destroyer at wars
-SJ


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users