Jump to content


Photo

Big Bad Sexy! A New Take On The Cpvc Barreled Bbb

HAVE A LOOK!

23 replies to this topic

#1 joeyaglr444

joeyaglr444

    Member

  • Members
  • 377 posts

Posted 02 November 2007 - 09:45 AM

Posted Image


What you will need:
Lots of glue sticks
Glue Gun
Phillips screwdriver ( or addition sign screwhead)
Epoxy
and some patience?

Alrighty lets get starty! I bought a Big bad bow at my Toys R us for about $20.
I've seen many people on this very site mod them and have had good results but I was tired of doing other peoples mods, So I made my own. I had a ton of 1/2 inch Cpvc left from past modding.

Ripped out the internals and saw what i could do. I threw out all the air restricter pieces except this one
Posted Image cut where it is marked and keep this piece for later your going too need it.

Not much to do but replace the barrel. But how? well I took this piece right here, which was located at the front of the gun and cut off the barrel where the arrow goes, all the way down to the base like this
Posted Image

Here comes the part that i was surprised actually worked. I was really worried about sealing the barrel properly so I took a very bold step. I cut out 8.5 inch of cpvc and put it in the base of the barrel which I cut off earlier. Than i said to myself "How the hell am i going to make sure this is sturdy enough?"
I put the barrel in enough so that the plunger wouldn't knock it senseless. and than i sorounded it in a sea of very hot glue.
Posted Image
But i didn't put too much otherwise the plunger casing wouldn't fit.
So I glued it up too here.
Posted Image
Make sure theres no air pockets it should be completely glued in(everywhere its blue).
Do not exceed that red line or your pieces will not fit together. Your going to need to hold your barrel straight until the glue dries, but once it does your good to go. now put the white piece we had earlier and put it back in and it should look like this: Posted Image
so your new barrel is almost complete.
Posted Image

I epoxied the new barrel to the plunger casing for an airtight barrel.
Now put it all back together and you have a new Big Bad bow that capable of hitting targets 100 feet away with top accuracy!(and a good stefan)

Posted Image

Heres the Demo Video! >
Thnk you custom snake for that one picture.
HEH

Edited by joeyaglr444, 19 August 2008 - 08:44 AM.

  • 0
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.

#2 Kenpachi Taicho

Kenpachi Taicho

    Member

  • Members
  • 80 posts

Posted 02 November 2007 - 09:58 AM

First off, very nice write up and very nice mod. It's rediculus that you're hitting 118' accuratly with only a barrell replacement. This mod makes me want to go o TRU and see what I can do with a BBB. I also like the name, Big Bad Sexy says it all!
  • 0

#3 joeyaglr444

joeyaglr444

    Member

  • Members
  • 377 posts

Posted 02 November 2007 - 10:10 AM

First off, very nice write up and very nice mod. It's rediculus that you're hitting 118' accuratly with only a barrell replacement. This mod makes me want to go o TRU and see what I can do with a BBB. I also like the name, Big Bad Sexy says it all!


Thanks, the 118 feet thing doesnt mean its going to hit 118 all the time though but out of all the times ive fired it thats the farthest.
  • 0
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.

#4 TED

TED

    In Brightest Prawn, in Darkest Shrimp...

  • Administrators
  • 1,339 posts

Posted 02 November 2007 - 11:15 AM

What's stopping the gun from sucking the dart into the plunger tube or you ram rodding it too far?

Edited by Dark Shrimp, 02 November 2007 - 11:15 AM.

  • 0
Star Wars can go fuck itself.

#5 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 02 November 2007 - 11:17 AM

Very nice Joey, I like it when I see people get rid of dead space resulting in better range and velocity.
118 is a little doubtful though without some kind of spring replacement.
Nice write up and consider it added.

Here are a couple suggestions though.
Posted Image
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#6 joeyaglr444

joeyaglr444

    Member

  • Members
  • 377 posts

Posted 02 November 2007 - 01:29 PM

Very nice Joey, I like it when I see people get rid of dead space resulting in better range and velocity.
118 is a little doubtful though without some kind of spring replacement.
Nice write up and consider it added.

Here are a couple suggestions though.
Posted Image


So u want me too clear off the crappy uneven edges of the air restricter thingy and fill it with glue all the way to the top?
im in the mioddle of solving that problem darkshrimp.

Edited by joeyaglr444, 02 November 2007 - 01:49 PM.

  • 0
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.

#7 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 02 November 2007 - 03:55 PM

not all the way to the top, all the way to the line that you made earlier.
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#8 joeyaglr444

joeyaglr444

    Member

  • Members
  • 377 posts

Posted 02 November 2007 - 04:26 PM

Thanks a lot you just saved my guns life.
  • 0
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.

#9 keef

keef

    Member

  • Members
  • 1,390 posts

Posted 02 November 2007 - 08:07 PM

I did the same thing a month or 2 ago, except I used FBR and craft foam. With a Handyman spring, I get 90 feet MAX! Thats pushing it 5-10 feet. How are you getting 118' max?

Nice mod though...
  • 0
Timothy M-Lick <3

#10 joeyaglr444

joeyaglr444

    Member

  • Members
  • 377 posts

Posted 02 November 2007 - 08:54 PM

I said capable of hitting 118 probably a lucky shot. who knows?
  • 0
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.

#11 nerfturtle

nerfturtle

    Member

  • Members
  • 223 posts

Posted 02 November 2007 - 09:18 PM

Starbuck said he got 120' with his BBB carbine, which I see to be perfectly possible given the emormous plunger chamber. FA_24 got 120' out of his LS, and BBBs have a bigger plunger chamber than the LS.
  • 0
The tough coughs as he ploughs the dough.
-Dr. Suess

#12 keef

keef

    Member

  • Members
  • 1,390 posts

Posted 02 November 2007 - 10:45 PM

Starbuck is 6'5 and it was angled 40*. Thats about 30* higher, and 1'5 feet taller than "the average joe"'s shot.
FA is amazingly talented at modding so thats different.

I mean, a lucky shot at 118' is common when actually playing, and not just shooting, but I just was surprised when he said flat.
  • 0
Timothy M-Lick <3

#13 n-strike

n-strike

    Member

  • Banned
  • 358 posts

Posted 03 November 2007 - 02:03 PM

Do you have to blow it down, or ram-rod it down? You should've put a coupler on it...Just a suggestion. :)
kthxbaisend

#14 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 05 November 2007 - 11:09 PM

FA_24 got 120' out of his LS


Ranges are typical.
99'
100'
102'
100'
101'
102'


I don't think I ever said I got 120' out of my longshot. Angled for sure.
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#15 n-strike

n-strike

    Member

  • Banned
  • 358 posts

Posted 06 November 2007 - 09:21 PM

Why didn't you add a coupler?
kthxbaisend

#16 Smashkirby

Smashkirby

    Member

  • Members
  • 66 posts

Posted 12 November 2007 - 03:30 PM

I did pretty much the same mod with my BBB, except that I put a coupler on mine. My suggestion would be to reinforce the plunger a little bit more. My Nitefinder's plunger head just broke and I wasn't even banding it. Another good idea is to cut down the barrel to 3 inches and add a coupler. What I did to mine was that I put in a barrel that was 3 inches, put a coupler on it, and made a tri-barreled speedloader that consisted of three 5 inch section of CPVC. Not only does this tremendously increase rate of fire, but it gives your BBB a sexier and more badass tri-barreled look.
  • 0
Quoting: My sister when she saw a picture of Groove.

"Daaaamn. That's one fine looking man"

Yeah. It was scary.

#17 Noob Modder

Noob Modder

    Member

  • Members
  • 40 posts

Posted 25 May 2008 - 07:27 PM

how much would the BBS (big bad sexy) hurt if it hits skin at close range?
stinging? welts? bruises?
i mostly use nerf guns indoors, and the maximum range i'd need is 40 feet, but about 120 might hurt a lot.
i wouldn't want to blind some1 permanently if hit in the eye...
  • 0
--DMQ
"i gots da good grammers"
"the only thing we have to fear is if the ninjas are coming!"
"mr. macho super-hero serial killer lemur-bear."
i am ninja-pwner

#18 PC III

PC III

    Member

  • Members
  • 389 posts

Posted 25 May 2008 - 07:37 PM

It is generally extremely erotic by the majority of the nic to post in old topics. If you have a question, pm the poster.
  • 0
QUOTE(ultra920 @ May 19 2008, 06:18 PM) View Post

Don't want to shove balls in tight spaces. Trust me, bad idea.

For sale: Vintage WWII French rifles. Dropped once, never fired.

#19 Devious

Devious

    Member

  • Members
  • 169 posts

Posted 25 May 2008 - 07:38 PM

Check Dates Before you post

This topic is almost a year old, you may want to re-read the Board rules
  • 0

#20 nerfer192

nerfer192

    Member

  • Banned
  • 82 posts

Posted 04 October 2008 - 08:43 PM

Ice claims his shoots 130'
The first time I made stefans I made them without weights.

92% of teens have moved on to the N-Strike line.
If you are part of the 8% who still use real old guns,
copy and paste this into your signature

woot I use at3k.

#21 CrazyIvan VI

CrazyIvan VI

    Member

  • Members
  • 295 posts

Posted 04 October 2008 - 08:54 PM

Seriously. This is like, your 5th Necro today, and this one has been necroed. Just stop posting unless you want to be banned.
  • 0
I get all giddy when I see VACC browsing a stupid topic. I just know someone is going to get banned.

#22 joeyaglr444

joeyaglr444

    Member

  • Members
  • 377 posts

Posted 18 June 2009 - 12:27 AM

Big Bad Sexy with Brass is on sale ! Pm for details.
  • 0
Boys Become Men....Men Become Wolves

Blaffair to Rememblack.

#23 carpethi3

carpethi3

    Member

  • Members
  • 1 posts

Posted 22 June 2010 - 02:32 PM

Hey cool gun, i did that but i didn't do the AR thing that you did (but of course i did remove all of the AR's) Mines different, mine won't stay cocked forward so i have to push it forward, also since i am bad at making stefans, i have to jam it down the barrel to get around 70-110 ft.
  • 0

#24 thedom21

thedom21

    Member

  • Members
  • 462 posts

Posted 22 June 2010 - 04:11 PM

This topic is over a year old. Read the code of conduct. There also was another person who posted on a year old topic and yet you did it again, unbelievable. Plus, you added nothing significant to this anyways.
http://nerfhaven.com...?act=boardrules
  • 0
Funny Irc moments

22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit

11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users