Jump to content


Photo

Fomas


28 replies to this topic

#26 utahnerf

utahnerf

    Member

  • Members
  • 339 posts

Posted 08 March 2011 - 01:54 PM

My favorite part of the gun is the use of the L+L body, because I feel that many homemade air guns lack a nice, solid shell. It is also nice that this body has a great reputation of being solid, and has been revised a few times, to work out issues. All in all, great gun, I would love to own one.
  • 0

#27 Whisper101

Whisper101

    Member

  • Members
  • 520 posts

Posted 08 March 2011 - 06:55 PM

@nerf_gra: The stock's top, long peice is 3/4" PVC, and the other two, shorter peices are 1/2' PVC. I used a bandsaw to cut the joints, PVC cement to secur them, and epoxy putty to add structural support. On the front is a 3/4" to 1/2" PVC reducer coupling. You may be seeing a little tof the blur from the pics, as it's not really all that clean and "blended".

@PVC: yeah, the first thing that came to mind after reading your suggestion was how would I do the trigger? It would be alot harder I think. I didn't take any insult at all. I very much appreciate your suggestions and comments, as they are well thought out and constructive.

Filled, wiht 4-6 pumps, the bolt is very difficult to grasp and pull by hand. Thjis is because I have a very strong spring in there, as well as tons o' air pressure. The washer helps a little, so maybe at 4 or 5 pumps I could still pull it. With the trigger, its much easier. at 5-6 pumps it's a stiff pull (insert sex joke), but not unmanageable by any means. The only challenge is that at the higher pressure you have to opent he valve faster to achieve max performance. This means squeezing harder (again, insert sex joke).

@ nerfgeek: it uses a lever trigger. it's very similar to a lever trigger 4B. the slot in the trigger is really just to give it a little play, which is actually necessary. It is not at all a slide trigger, as that would put a huge amount of stress on the joint betweent he trigger peice and the fork that sits in fornt of the washer.

@utahnerf: Yeah, the shell ties everything together nicely in my opinion. that's another good point about the shell; it's very solid and stable. I literally just modified the sideplates to accomodate my visual needs, and cut the handles differently so the'd be more comfortable.

Thanks for the questions guys, I hope I've answered them adaquately, and if I haven't just let me know. Keep 'em coming!!!
  • 0

#28 shardbearer

shardbearer

    Member

  • Members
  • 177 posts

Posted 09 March 2011 - 07:20 AM

Nice job, a small air powered blaster that actually has a shell. Do you have psi readings?
  • 0

#29 Whisper101

Whisper101

    Member

  • Members
  • 520 posts

Posted 26 March 2011 - 03:58 PM

Whoah!! I still exist!! Yes, i do in a way. I have this hooked up to a PVC hardtank backpack, and I fill the tanks up to about 75 PSI. I get maybe 20 shots, usually a few less. I;m not sure if this helps. I do remember that, when testing one fo my earlier PVATS, they reached may pressure at about 50-55 PSI.
  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users