Jump to content


Photo

Nerf Weapons Rack

Looking for plans.

29 replies to this topic

#1 littlemikey

littlemikey

    Member

  • Members
  • 46 posts

Posted 16 July 2008 - 08:50 PM

Howdy there guys.
I'm trying to design and build a weapons rack for my Nerf guns. However, I lack all creative talent, so I was wondering if anyone has plans for such a thing. I have lots of Mavericks, so a rack that just holds them would be nice, the other thing I would store on it is Recons, since I have several of those too.

I have several woodworking tools available to me, but no metalworking supplies. Unfortunately I would have no idea where to begin, so if anyone has ideas or can help me out with a design, I would really appreciate it.

Thanks :)
  • 0

#2 mrcrouse1

mrcrouse1

    Member

  • Members
  • 436 posts

Posted 16 July 2008 - 09:23 PM

Can you give us an idea where you are putting them? On a wall or acctually a movable rack? If on a wall, get peg board, and the different shaped metal pegs that you can stick into the peg board, and arrange them to hold the guns.

Edited by mrcrouse1, 16 July 2008 - 09:24 PM.

  • 0

#3 Split

Split

    Member

  • Members
  • 1,771 posts

Posted 16 July 2008 - 09:27 PM

Peg board and hooks is generally enough. If you want to go over the top, little wooden plaques with nail holes to attach to the wall? Velcro even? :)

I doubt you need anything serious, like aluminum bars and stuff. Despite how much you like the guns, isn't it really all about going out and nerfing?
  • 0
Teehee.

#4 littlemikey

littlemikey

    Member

  • Members
  • 46 posts

Posted 16 July 2008 - 10:03 PM

Can you give us an idea where you are putting them? On a wall or acctually a movable rack? If on a wall, get peg board, and the different shaped metal pegs that you can stick into the peg board, and arrange them to hold the guns.


It would be a wall mounting.

Peg board and hooks is generally enough. If you want to go over the top, little wooden plaques with nail holes to attach to the wall? Velcro even? ^_^

I doubt you need anything serious, like aluminum bars and stuff. Despite how much you like the guns, isn't it really all about going out and nerfing?

I would like something serious :)

I run a Nerf club at my University, and we want a weapons rack to put up on the wall of our clubroom. Something that does look quite hardcore :);
  • 0

#5 mrcrouse1

mrcrouse1

    Member

  • Members
  • 436 posts

Posted 16 July 2008 - 10:19 PM

Use peg board and paint it. You could easily paint it to make it look hardcore. If not, use just screw in hooks on the wall, that way you don't have all the holes, and once again paint it.
  • 0

#6 nerfsharpie6

nerfsharpie6

    Member

  • Members
  • 326 posts

Posted 16 July 2008 - 10:30 PM

I have four 2X4's that make up a closet that holds my Central Air unit. I just screwed in some J hook things.
If you want something made of wood that you built your self, then I guess you could make like a flat table top from plywood and attach that to some 1X4's or something similar. Then use wood dowels to make the hooks for your collection. Then maybe attach it to your wall.

On a side note: You could glue some foam like from a hand gun case to the ply wood and cut out the shapes of your guns to make them more stable. Just a thought.
  • 0
We hang our flags and banners of victory off of your dead bodies.

#7 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 16 July 2008 - 10:54 PM

Peg board is my choice.

Posted Image

Full work room video planned for future.
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#8 BustaNinja

BustaNinja

    Member

  • Members
  • 1,916 posts

Posted 16 July 2008 - 10:55 PM

Peg board is my choice.

Posted Image

Full work room video planned for future.


WAIT..... is that news of another Angel production soon> I sure hope so.
  • 0
Me: Yeah. he beat a hooker
Venom: Haven't we all?

#9 serpent sniper

serpent sniper

    Member

  • Members
  • 222 posts

Posted 17 July 2008 - 12:32 AM

Peg board, 4 screws, and 12 washers is what I used. Three washers between each corner of the peg board and the wall.

I also found a bunch of hooks that are used for power drills. These hold a pistol nicely. Combine 2 for a longer gun. This is what I use for my airsoft guns. I've slowly been rebuilding an arsenal, so I may build a rack on the opposite wall for nerf.
  • 0
Animus GmbH My Custom Nerf Props and Paintjobs

#10 mystefansdontflystraight

mystefansdontflystraight

    Member

  • Members
  • 1,176 posts

Posted 17 July 2008 - 08:44 AM

I work in a tiny sorage room, which is all my nerf hating parents will give me to work in. It has wooden rafters, so I put some nails in that and hang guns on that. It's easy to hang guns like my BBBB and xbow, but others are not so easy. Mavs would be easy though, because of the hole in the back of the slider.

Oh Angel: That is awesome, 3 legendary guns in a row. Your LS, BBB, Doomsayer. Can't wait to see the write up for the other one.
  • 0
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) View Post

QUOTE(white moonlight @ Dec 23 2009, 01:29 PM) View Post

It's just screaming to be rearloading...

I seen a movie about that once.



#11 littlemikey

littlemikey

    Member

  • Members
  • 46 posts

Posted 17 July 2008 - 09:13 AM

Peg board is my choice.

Posted Image

Full work room video planned for future.

I just want you to know that I love you and want your babies.
  • 0

#12 laxtk88

laxtk88

    Member

  • Members
  • 189 posts

Posted 17 July 2008 - 10:07 AM

Peg board is my choice.
(pic of peg board that is littlemikey's porn.)

Full work room video planned for future.

I just want you to know that I love you and want your babies.


...Um... isn't that taking it a bit far?

Edited by laxtk88, 17 July 2008 - 12:25 PM.

  • 0
QUOTE(Sleebo @ Jun 12 2008, 07:23 PM) View Post

Just for the record, my mother is the most beautiful women in the world.

#13 balisticjoe

balisticjoe

    Member

  • Members
  • 311 posts

Posted 17 July 2008 - 11:25 AM

I was going to say peg board, but I was beat to it. You could however get wood slats from walmart (There used for wood burning and clocks. Found by the dowel usually.) Spray paint it black. Put on the hooks. add neat looking electronics and things around it. To get designs for the electronics you could use Tony Starks chest thing or look at steam punk stuff (looks cool but with no real purpose.). If you don't know any electronics You can always just put a big polycarbonate box with hinges over it.
  • 0
There Are No Stupid Questions, But There Are A Lot Of Inquisitive Idiots.

#14 bartel

bartel

    Member

  • Members
  • 111 posts

Posted 17 July 2008 - 11:26 AM

I have to agree with laxtk. But do you guys have to keep putting the picture in your posts? There's already three of them on the first page.

Edited by bartel, 17 July 2008 - 11:26 AM.

  • 0
"I say anyone who knows how to mod a Nerf gun is a badass" -Leaf-o, www.angryaardvark.netfreehost.com

#15 Kazimir

Kazimir

    Member

  • Members
  • 31 posts

Posted 17 July 2008 - 12:43 PM

I'm trying to design and build a weapons rack for my Nerf guns. However, I lack all creative talent, so I was wondering if anyone has plans for such a thing. I have lots of Mavericks, so a rack that just holds them would be nice, the other thing I would store on it is Recons, since I have several of those too.


The design of your rack will be affected by why you want it. Is this for displaying all of your blasters, or is it for storage without concern for how they are displayed?

In the former case, pegboard is a good idea, particularly if your stock changes, so that you can alter the layout such that all are displayed appropriately.

In the latter case, what you want is almost a four-sided box (back, sides, bottom) scaled to accommodate a blaster standing barrel-up, with partitions such that they can sit side-by-side.
  • 0

#16 littlemikey

littlemikey

    Member

  • Members
  • 46 posts

Posted 17 July 2008 - 07:16 PM

I was going to say peg board, but I was beat to it. You could however get wood slats from walmart (There used for wood burning and clocks. Found by the dowel usually.) Spray paint it black. Put on the hooks. add neat looking electronics and things around it. To get designs for the electronics you could use Tony Starks chest thing or look at steam punk stuff (looks cool but with no real purpose.). If you don't know any electronics You can always just put a big polycarbonate box with hinges over it.

No Walmart in Australia, but I think I have a fair idea what you're talking about.

I'm trying to design and build a weapons rack for my Nerf guns. However, I lack all creative talent, so I was wondering if anyone has plans for such a thing. I have lots of Mavericks, so a rack that just holds them would be nice, the other thing I would store on it is Recons, since I have several of those too.


The design of your rack will be affected by why you want it. Is this for displaying all of your blasters, or is it for storage without concern for how they are displayed?

In the former case, pegboard is a good idea, particularly if your stock changes, so that you can alter the layout such that all are displayed appropriately.

In the latter case, what you want is almost a four-sided box (back, sides, bottom) scaled to accommodate a blaster standing barrel-up, with partitions such that they can sit side-by-side.

I'm more interested in something that looks like this:
Posted Image
Basically halfway between the two.
  • 0

#17 Philote

Philote

    Member

  • Members
  • 220 posts

Posted 18 July 2008 - 08:11 AM

Peg board is my choice.

::IMAGE::

Full work room video planned for future.

I just want you to know that I love you and want your babies.


Must. Resist. Urge. to. sig.
  • 0
EPH!
QUOTE
What do I wnat for my birthday? The usual, money, a Xbox Game, and a throng of bearded men. You know, the usual stuff.


#18 Kazimir

Kazimir

    Member

  • Members
  • 31 posts

Posted 18 July 2008 - 09:12 AM

[quote name='Kazimir' post='163081' date='Jul 18 2008, 01:43 AM']
[quote name='littlemikey' post='163027' date='Jul 16 2008, 09:50 PM']
I'm trying to design and build a weapons rack for my Nerf guns. However, I lack all creative talent, so I was wondering if anyone has plans for such a thing. I have lots of Mavericks, so a rack that just holds them would be nice, the other thing I would store on it is Recons, since I have several of those too.
[/quote]

The design of your rack will be affected by why you want it. Is this for displaying all of your blasters, or is it for storage without concern for how they are displayed?

In the former case, pegboard is a good idea, particularly if your stock changes, so that you can alter the layout such that all are displayed appropriately.

In the latter case, what you want is almost a four-sided box (back, sides, bottom) scaled to accommodate a blaster standing barrel-up, with partitions such that they can sit side-by-side.
[/quote]
I'm more interested in something that looks like this:
Posted Image
Basically halfway between the two.
[/quote]

That's a very good start. it's just a box with a door; a cabinet. With a board that has slots cut of the appropriate size for the item you wish to store, spaced evenly for as many as you intend.

Literally, just find plans for a cabinet, size them to what you need, then install a four-inch strip of quarter-inch Masonite that has slots cut to support your recons.
  • 0

#19 bartel

bartel

    Member

  • Members
  • 111 posts

Posted 18 July 2008 - 11:34 AM

The back of that cabinet looks like it has holes so you can move the parts that hold the guns. You could just build a box with a peice of peg board as the back.
  • 0
"I say anyone who knows how to mod a Nerf gun is a badass" -Leaf-o, www.angryaardvark.netfreehost.com

#20 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts

Posted 18 July 2008 - 12:55 PM

I just made some plans that I plan to use... I just need to buy 4 hinges and 2 handles. You can just place pegboard in the back of it.

Posted Image
  • 0

#21 bartel

bartel

    Member

  • Members
  • 111 posts

Posted 18 July 2008 - 02:53 PM

I seem to have misplaced my ruler, but it looks like the back is a 3 feet by 3 feet sqare. And it looks to be 1 foot deep. HxWxD=3'x3'x1'. Is that right?
  • 0
"I say anyone who knows how to mod a Nerf gun is a badass" -Leaf-o, www.angryaardvark.netfreehost.com

#22 littlemikey

littlemikey

    Member

  • Members
  • 46 posts

Posted 19 July 2008 - 04:43 AM

I just made some plans that I plan to use... I just need to buy 4 hinges and 2 handles. You can just place pegboard in the back of it.

Posted Image


Gah, now I have to convert that to metric :P
Silly Imperial system XD
  • 0

#23 Recruit

Recruit

    Member

  • Members
  • 67 posts

Posted 19 July 2008 - 12:12 PM

This might help you.
  • 0
Falcon about himself.
QUOTE
... Ask Bags...he'll tell you without hesitation that I'm an idiot, but I certainly think about it before I do something stupid.


"Good character is something you cannot fake. And it always comes full circle at the end."

-Piney-

#24 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts

Posted 19 July 2008 - 05:55 PM

I thought I made it a 5x5 foot square for the back...

EDIT: yes it is 1 foot in depth.

Edited by Kid Flash, 19 July 2008 - 05:56 PM.

  • 0

#25 bartel

bartel

    Member

  • Members
  • 111 posts

Posted 19 July 2008 - 09:08 PM

I don't think the picture has a 5 inch back, but as long as you know what you mean, you'll be able to figure it out.
  • 0
"I say anyone who knows how to mod a Nerf gun is a badass" -Leaf-o, www.angryaardvark.netfreehost.com


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users