The only thing i can think of is your going to have to trial and error with a universal tv remote there will be 2 codes one to move the launch angle one to launch a disc. It is somewhat complicated but i would try a tv remote see if any buttons or combo of buttons triggers anything.
Other options involve much more complicated methods involving making a new control board with an arduino. It would not be overly complicated to control a 3 position servo a variable speed motor and the launch solenoid. It is beyond my skill but it would be possible.
A easier method might be to buy a second one with a remote they are 65-130 on ebay or find someone with the remote willing to let you record the pulses from it you could then program a select few remotes perhaps even a tv be gone diy type unit you would just need to use the 2 codes from the actual remote instead of the on/off db they flash on the diy chips.
http://www.instructa...e-with-Arduino/
Edited by Lunas, 16 September 2014 - 06:24 AM.