Jump to content


Photo

Guide To Barrel Material


229 replies to this topic

#26 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 30 March 2007 - 03:41 PM

Yeah, aluminum is hard to find up my way. Brass is pretty easy to find in the larger towns/small cities, but PETG is really hard to find, it seems that most pet suppliers won't carry it. One store showing promise is primarily into aquatic pets, so for anybody out there looking for some local PETG, check pet stores with alot of aquatic life.

PETG is not going to be available in usable sizes unless you order a custom run of 100 feet or more. Hence why it's sold on the forums here and elsewhere by certain members. If you want to use PETG contact me, OMC, or sometimes cxwq.

Edited by CaptainSlug, 30 March 2007 - 03:41 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#27 Flaming Hilt

Flaming Hilt

    Member

  • Members
  • 1,070 posts

Posted 30 March 2007 - 03:46 PM

...or Arcata Pet (just search "plastic tubing").
  • 0
" Beneath this mask there is more than flesh, Mr. Creedy. Beneath this mask there is an idea...
...and ideas are bulletproof. "
V

#28 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 16 April 2007 - 01:04 AM

...or Arcata Pet (just search "plastic tubing").

Again, those are not usable sizes because their dimensions are precisely fractional (1/2" ID won't work). Typically a barrel will need somewhere between a .525" to .5345" inner diameter to be compatible with micro stefans.

Edited by CaptainSlug, 16 April 2007 - 01:09 AM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#29 kinkaid701

kinkaid701

    Member

  • Banned
  • 6 posts

Posted 06 May 2007 - 12:52 PM

pat of maverick masters sig:"In a sense, what I'm saying is that you shouldn't waste your time handling your balls. Go for the foamy rods instead."


dude, are you gay!!!?!!???! now you made me forget what i was about to say.....



oh!!! thanks cxg.. although i can get your name staright you helped me alot. i am using homemade stefans, and let me tell you what works best for my nite finder...

BRASS

EDIT: the big thing that i don't get is that modman uses brass barrels and it gives the nite finders the best preformance ive ever seen.... and it works the same with any nerf micro :)

Edited by kinkaid701, 06 May 2007 - 12:53 PM.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

My probation doesn't allow me to be within 50 yards of any machine that can cause death. damn them.
my NEW hobby is nerf.(till my probation ands)

#30 shadowkid33

shadowkid33

    Member

  • Members
  • 633 posts

Posted 10 May 2007 - 07:51 PM

What is sch80 pvc used for? It's loose on my stefans and I was looking for input on what you guys use it for.
  • 0
QUOTE
how the heck do you make a double clip?

QUOTE
Here are the steps.
1. Go to the search button in the right corner of the screen
2. Click
3. Search double longshot clip.

QUOTE
i dont have time, jeez, im new here!

#31 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 10 May 2007 - 11:47 PM

1/2" SCH80 CPVC typically has an inner diameter around .526", which is a very good fit for most 1/2" foam backer rod and stock darts.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#32 Guest_DarkInfection_*

Guest_DarkInfection_*
  • Guests

Posted 20 May 2007 - 12:10 PM

Cs, the Arcata pet place did have 9/16 OD plastic tube, but thats not to say that the inside will fit stephans. Also, here is a place with acrylic tubing, comes in various sizes, colors, and wall thicknesses (sp). http://www.rplastics...crylictube.html
  • 0

#33 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 25 May 2007 - 04:27 PM

Been doing a little bit of experimentation with aluminum as a barrel material.
Posted Image
Pictured above is .526" ID 5/8" OD aluminum tubing.

Edited by CaptainSlug, 25 May 2007 - 10:18 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#34 King Of Butt Land

King Of Butt Land

    Member

  • Banned
  • 324 posts

Posted 25 May 2007 - 05:03 PM

Yeah, I've found that 3/4" aluminum is really good for 5/8" backer rod, at least the fat stuff I have.

-Butt
QUOTE(Puppy-§layer @ Dec 18 2008, 04:22 AM) View Post

This contest may have some flaws, as people can simply be a deuschbag over the internet. By Lying.

A war-like setting/invitational would be better...


#35 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 28 May 2007 - 12:04 AM

Yeah, I've found that 3/4" aluminum is really good for 5/8" backer rod, at least the fat stuff I have.

-Butt


What is the wall thickness? That would be a squeeze getting 5/8" into 5/8".
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#36 Thom

Thom

    Member

  • Members
  • 759 posts

Posted 15 July 2007 - 02:55 PM

@CaptainSlug: Would 17/32 brass nest inside that aluminum?
  • 0

#37 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 08 August 2007 - 09:40 PM

It should be fairly obvious that the answer is no.

17/32 = 0.53125"

The ID of the aluminum barrel = 0.526"
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#38 Nonsense Man

Nonsense Man

    Member

  • Members
  • 308 posts

Posted 26 August 2007 - 01:50 PM

How tight should stock darts be on CPVC??
  • 0
QUOTE(1lastnerfgun @ Apr 19 2008, 08:39 AM) View Post

40 shots for 40 cocks


#39 monkey with a nf

monkey with a nf

    Member

  • Members
  • 110 posts

Posted 26 August 2007 - 02:03 PM

If they're taggers, really tight. I've found that CPVC is the tighest of all the common barrel materials (my darts don't work in it at all).

EDIT: Typo (stupid lack of google toolbar on this computer!)

Edited by monkey_with_a_nf, 26 August 2007 - 02:04 PM.

  • 0
QUOTE(Pineapple @ Sep 12 2007, 03:13 PM) View Post

For maximum efficiency?


1. Pump up. Count how many pumps.

2. Keep going until you hear a loud "bang".

3. Subtract one pump from the total. Rebuild your air bladder.


There you go.

#40 Thom

Thom

    Member

  • Members
  • 759 posts

Posted 30 August 2007 - 11:26 AM

On a related note, I've found that 5/8 ID poly fits the aluminium like a glove -- good seal, but slide-able.
  • 0

#41 Ubermensch

Ubermensch

    Member

  • Members
  • 1,056 posts

Posted 16 September 2007 - 05:36 PM

Yesterday, I went to Home Depot looking for a barrel material and found a material that fits my stock darts and some of my 1/2'' wide stefans. It's called PEX piping and it seems like it's exactly the same as PVC. Anyone know the difference? Is it heavier? Lighter? More friction?
  • 0
"In order to make an apple pie from scratch, you must first create the universe."-Carl Sagan
Nerf Rocket Air Launcher

#42 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 16 September 2007 - 06:56 PM

Yesterday, I went to Home Depot looking for a barrel material and found a material that fits my stock darts and some of my 1/2'' wide stefans. It's called PEX piping and it seems like it's exactly the same as PVC. Anyone know the difference? Is it heavier? Lighter? More friction?


if we're both thinking of the same thing, the you probably have PEX, PolyPEX, or Poly pipe, which is black or off-white in colour. It's used for a durable, corrosion-resistant water delivery (found more and more in homes in this day and age), and is used to replace copper. I thought about using it once, but it is flexible, which means it is only good for short barrels. Long barrels could sag if they are unsupported.
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#43 Ubermensch

Ubermensch

    Member

  • Members
  • 1,056 posts

Posted 16 September 2007 - 07:13 PM

It's just normal PEX. Since I only use short barrels that are 5 in. at the longest, I find that PEX works very well, and it's cheaper than the PVC I could find. It also performs better than my copper.
  • 0
"In order to make an apple pie from scratch, you must first create the universe."-Carl Sagan
Nerf Rocket Air Launcher

#44 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 16 September 2007 - 08:28 PM

Yeah, it's really cheap material (cost-wise). For that short, you'd have no problems. It's for singled guns with like a a >14" barrel that might see problems. What length do you get it in? I've only seen 50' rolls of it (that's the smallest, I've seen 100' and 500').
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#45 Ubermensch

Ubermensch

    Member

  • Members
  • 1,056 posts

Posted 17 September 2007 - 05:35 AM

The smallest length it was being sold in was 5'. I got two 5' measures of it.
  • 0
"In order to make an apple pie from scratch, you must first create the universe."-Carl Sagan
Nerf Rocket Air Launcher

#46 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 17 September 2007 - 09:38 AM

The smallest length it was being sold in was 5'. I got two 5' measures of it.


It's been a while since I've seen the stuff, what colour is it?
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#47 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 17 September 2007 - 10:05 AM

PEX = Polyethylene
It comes in white or black. It's not very easy to source in pipe sizes smaller than 3/4.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#48 Ubermensch

Ubermensch

    Member

  • Members
  • 1,056 posts

Posted 17 September 2007 - 05:41 PM

Two answer Prometheus' question, it's white.
  • 0
"In order to make an apple pie from scratch, you must first create the universe."-Carl Sagan
Nerf Rocket Air Launcher

#49 sam

sam

    Member

  • Members
  • 1,059 posts

Posted 19 October 2007 - 04:55 PM

CS, would you mind posting the McMaster links for Sch. 80 CPVC and the aluminum tubing. I haven't had any luck finding them on McMaster.

EDIT: I found the Aluminum tubing, but am still looking for the Sch. 80 CPVC link/part number.

Edited by sam, 19 October 2007 - 05:04 PM.

  • 0

#50 Lynx

Lynx

    Member

  • Members
  • 983 posts

Posted 19 October 2007 - 08:02 PM

Another question...


I am modding a nitefinder. What length of sch40 1/2" pvc should I use with stock micros (with sticky tip not the sonics)?
  • 0
Columbus' original crazy asshole now comes with:

AWESOME NITEFINDER


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users