Vulcan problem
#1
Posted 07 April 2012 - 09:31 PM
#2
Posted 08 April 2012 - 02:50 AM
"Where do I put my but?"
#3
Posted 08 April 2012 - 04:13 AM
Edited by Seprest, 08 April 2012 - 04:14 AM.
22- Mods completed
#4
Posted 08 April 2012 - 04:59 AM
The mechanism that seals the tube to the belt isn't functioning properly. What can happen is the seal created from the front part of the tube being pushed forward onto the belt chamber can be lost due to the mechanism allowing the part to spring back before the round has fired. The mechanism is located behind the front part of the tube.
You can kinda mess with it by playing with the little flap that is under the tube by pulling it back and seeing if it stays in place. I know this is not a good description but hopefully you can figure out what I mean if you are looking at the internals.
#5
Posted 08 April 2012 - 09:43 AM
#6
Posted 09 April 2012 - 10:46 AM
#7
Posted 09 April 2012 - 02:33 PM
I can fire through a whole belt manually. So I think its a problem something like what darthrambo said in that the seal is being removed before the dart is launched. I'm not totally sure how to fix that though. I'll have to look into it when I get another chance to open up my Vulcan.
1-Strech the spring that pushes the nub out that holds the tube forward
2-Remove any lube that might have got on the nub and rough up the surface so that there is more friction so it doesn't slide off as easy
#8
Posted 10 April 2012 - 12:58 PM
I will get back to you after said mods are finished, thanks for all the help!1-Strech the spring that pushes the nub out that holds the tube forward
2-Remove any lube that might have got on the nub and rough up the surface so that there is more friction so it doesn't slide off as easy
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users