Jump to content


Photo

Modification and Paintjob Pictures

POST PICTURES ONLY. How hard is that.

5162 replies to this topic

#2026 Tigadee

Tigadee

    Member

  • Members
  • 77 posts

Posted 23 April 2009 - 06:40 PM

Hey Will, it's finally finished! That's one devilishly good-looking piece of work!

I'm finally official for this forum, so here's my first PJ made some months ago:
-
My first RECON
Posted Image
-
Posted Image
-
Posted Image

It was my first attempt to PJ a Nerf, so I've done some light weathering and detailing. Since I'm a big sci-fi fan, these Nerfs fulfil my (nerdy :*) ) fantasies of being a Space Marine, or Colonial Marine/Warrior, etc.
-
My first FF
Posted Image
-
Posted Image
-
Posted Image
  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#2027 Tigadee

Tigadee

    Member

  • Members
  • 77 posts

Posted 23 April 2009 - 08:24 PM

My first (and so far ONLY - lot of work for this monster!) VULCAN:
Posted Image
-
Posted Image
Who's your daddy?! Bwahahahahaha!
-
Posted Image
-
Posted Image

And to complete the Black-n-silver set, my first MAV:
-
Posted Image
-
Posted Image

Edited by Tigadee, 23 April 2009 - 08:28 PM.

  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#2028 HeracrossKid

HeracrossKid

    Member

  • Members
  • 32 posts

Posted 23 April 2009 - 11:45 PM

Hello everybody. I've been browsing the forums here with great interest and now that my account has been validated, I thought I could contribute something(although it is small).

Here is my arsenal:
Posted Image

My TTG and double-barreled BBMM are not pictured.

This is the first iteration of my preferred primary:
Posted Image

It features a double coupler system, a telescoping brass barrel, intertwined Recon spring, reinforced internals, and a heavily modified NF.

It looks crappy. I need to work on it.
  • 0

#2029 Specops

Specops

    Member

  • Members
  • 14 posts

Posted 24 April 2009 - 12:14 AM

First post, hello Nerf Haven!

First my trustworthy Nerf Longshot CS-6,
Posted Image
Posted Image
Posted Image
Trust me, it looks much better in real life. Next my Buzz Bee Double Shot,
Posted Image
My Nerf Crossfire (with custom cocking handle),
Posted Image
Posted Image
with multiple speedloaders and barrels,
Posted Image
the bottom barrel is for fun, it does nothing.
Next my 1st generation Nerf Night Finder,
Posted Image
and last, and yes the leasted (nonworking) Nerf Recon CS-6,
Posted Image
Posted Image
Posted Image
I am planing to fix this (for the 3rd time) sometime this year, but not today. Will do write-ups if requested. These are by far not the only blasters I own, but the only ones that look descent.

Edited by Specops, 24 April 2009 - 12:27 AM.

  • 0
Call Me Nerf Spec Ops

#2030 Mr BadWrench

Mr BadWrench

    Member

  • Members
  • 781 posts

Posted 24 April 2009 - 02:36 AM

Posted Image
  • 0
NerfChat IRC Chatroom Click to chat!

#2031 Tigadee

Tigadee

    Member

  • Members
  • 77 posts

Posted 24 April 2009 - 07:10 AM

My "Recon CARBINE":
Posted Image
-
Posted Image
-
Posted Image
-
The 'Red Hot Chili Pepper' MAV:
Posted Image
  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#2032 angel of nerf

angel of nerf

    Member

  • Members
  • 8 posts

Posted 24 April 2009 - 09:53 AM

My first post Posted Image my night finder cant do ranges today to breezy

Posted Imagemy other night finder

Edited by CaptainSlug, 25 April 2009 - 11:17 PM.

  • 0

#2033 wisdom000

wisdom000

    Member

  • Members
  • 52 posts

Posted 24 April 2009 - 05:24 PM

New guy, hopefully I won't make to much of an ass of myself:

Anyway, here we go:
Please forgive the poor quality pictures, all I had was my cellphone, and the lighting just wouldn't work right.

The Firefly was the second nerf gun I bought, and the first one I painted. I screwed it up and the paint came out kinda thick, the gray even cracked. But thats ok, it ended up looking kinda cool anyway, and taught me a lesson about waiting till whatever I am painting is the same temperature as the environment I am painting it in. The only real modding done to it is the Air Restrictors were removed, but I would like to mod it so the barrels spin like a Gatling gun. Perhaps being able to switch between normal mode and cosmetic, so it will still work. Would love to redo this one, and if I can ever get my hands on a cheap FF, even just the shell, I will.

Posted Image

The second gun I painted was my Recon, the third Nerf I bought. It has had the plunger hole plugged and the AR removed. I also modded the stock, condensing it all down to look like one piece, and cutting a hole through the pieces so the bolt of the plunger moves through them. Wouldn't mind getting a second Recon and trying a similiar but different paint scheme., would also like to try a mod to reposition the slide to the back of the weapon. It's my favorite gun performance wise. The paint job isn't inspired, just black with the original accents, a hammerred finish barrel, and some silver accents, but I wanted it to look basic.

Posted Image

Here you can see the stock mod, and how the plunger bolt slides through... sorry for the fuzzy quality. I wish I had had a dremmel for this, it would have turned out much cleaner, as it was I did it with wire cutters and toenail clippers, if you can believe that.
Posted Image
Posted Image

Next up was my Longshot. I see it plenty, but I love the Pulse Rifle look, and I wanted one for myself. Other than plugging the plunger hole and ar removal, the only thing else I really did was add-on a soda bottle cap to the front gun to make it look more like a shotgun, and cut the "up" clip on the front gun handle to allow it to be removable because sometimes I want it to look more like a Morita. I also used some PVC pieces I had and an ibuprofen bottle to make a secondary "loser" style barrel extension. When my new longshots arrive, I have some new things I want to try, mostly cosmetic, but I do have an interesting mod planned for the frontguns. I didn't do anything major to this one because I like the idea of a modular, multi-purpose weapon.

Posted Image
Posted Image

Then we come to my Mavericks, the first nerf guns I bought and modded, and second to the last on the paint list. I had seen them done silver and black, and I dug that concept. So I gave it a shot myself. The black one has a crazy "shimmer" texture, which is kind of cool, kind of reminds me of rough iron.
Posted Image

Finally, on a whim I bought a RFR from buzz bee. Silver casing, but with a hammered mettalic black barrels and accents. No real modding of any kind, though I did take an extra stock from an old entertech m-16 watergun and add it to the stock of the RFR to make it long enough to actually be useful. After painting, I really have come to love this cheap ass gun. It just has this post apoclypse vibe, so I adorned it with crap. I like the way it turned out, and I love the shell ejection. I think there must be a pretty big spread for quality with these guns, because I hear a lot of bad about them, but out of the box I was shooting my cat from across the room. (Cat has eaten like 15 darts, so it served him right :P ) I cut the suction cups off the darts to give it a wierd "bolt" look, I painted the shells and the tips of the darts as well, just because. I also added the sight thingy from the recon, because its utterly useless and antiquated, but it looks ok on this post apocalypse style rifle...

Before decoration. You can see the longer, thicker stock...
Posted Image

After
Posted Image

detail shots of the crap hanging off it...

Posted Image
Posted Image


And thats what I have done so far. I did them all in about a week. I don't LARP, but I do play roleplaying games, and these serve more as decoration for my custom gaming room than they do for shooting, though frequently during games a skirmish will break out between my friends and I.

I realize my paint jobs are pretty cliche by now, but that's fine with me, I wanted them too look either "cyberpunky" or "post-apoclyptic", and I think I achieved that.

I have a Vulcan and 2 more longshots I need to take pictures of, as soon as I do I will post them up.
  • 0
Datafortress 2020, the largest and most comprehensive Cyberpunk 2020 site in the world, home of Interlock Unlimited:
http://datafortress2020.110mb.com/

#2034 Tigadee

Tigadee

    Member

  • Members
  • 77 posts

Posted 24 April 2009 - 06:43 PM

Wisdom - Those are great - especially love the collapsed stock of the Recon! And nice work with the stock of the RF too... Hope to make a stock extension for my newly-arrived RF too...

After the red MAV and inspired by BritNerfMogul, I decided to do a Recon in the colour scheme of the US Colonial Marines from Aliens:
Posted Image
-
Posted Image

Edited by Tigadee, 24 April 2009 - 07:47 PM.

  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#2035 ELI M

ELI M

    Member

  • Members
  • 61 posts

Posted 24 April 2009 - 08:11 PM

http://s686.photobuc...nl.jpg&newest=1

This is my new lnl. I won it and a crossfire in a bet.

Edited by ELI M, 24 April 2009 - 08:16 PM.

  • 0
Chuck Norris and Lance Armstrong had a "Who has more balls" contest. Chuck won by seven.
http://elijah-m.mybrute.com

#2036 Ice Nine

Ice Nine

    Prince Dangus

  • Administrators
  • 1,460 posts

Posted 25 April 2009 - 12:36 AM

Hornette Salvo.

Posted Image

Posted Image

Posted Image

Took longer to finish than I expected. Hits seventies, but I haven't pumped it up very much. It's a fun gun.

I wish I had a heat gun to swell out the case to put the BSs actually inside but it's fine and functional for right now.
  • 0

Unholy Three: DUPLUM SCRTA, DUPLUM PROBLEMA (2009)

But Zeke guns tend to be like proofs by contradiction

Theoretically solid but actually non-constructive

Rnbw Cln


#2037 Spaz

Spaz

    Member

  • Members
  • 1 posts

Posted 25 April 2009 - 12:38 AM

Sweet gun Ice_Nine,. Yeah!

Posted Image
My Big Blast, couplered with a twelve-inch PETG barrel DAWGS.

Edited by Spaz, 25 April 2009 - 12:45 AM.

  • 0

#2038 Strange-1

Strange-1

    Member

  • Members
  • 3 posts

Posted 25 April 2009 - 12:39 AM

My Nerf Maverick:

Posted Image

Spray painted red and black, Russian roulette mod, and pennies shoved behind the spring.

First try, no primer, and had no tools (only a screw driver, an X-acto knife, and leftover spray paint).
  • 0
I shoot zombies with Nerf guns.

#2039 Tigadee

Tigadee

    Member

  • Members
  • 77 posts

Posted 25 April 2009 - 08:52 AM

My first LS! One of my favourite Nerf guns - Lovin' it!
-
Posted Image
-
Posted Image
-
Posted Image

Edited by Tigadee, 25 April 2009 - 06:12 PM.

  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#2040 Strange-1

Strange-1

    Member

  • Members
  • 3 posts

Posted 25 April 2009 - 10:40 AM

"Drachenfische"

http://img.photobuck...on/IMG_2081.jpg

http://img.photobuck...on/IMG_2085.jpg

http://img.photobuck...on/IMG_2086.jpg

http://img.photobuck...on/IMG_2088.jpg

http://img.photobuck...cheon/fish3.jpg

The "lure" on the forehead is a flexible-neck book light. As with my prior posts, this blaster is for a steampunk-themed larp.


This is the most creative idea ever. I love it!
  • 0
I shoot zombies with Nerf guns.

#2041 atomatron

atomatron

    Member

  • Members
  • 579 posts

Posted 25 April 2009 - 09:00 PM

My PETG'd 2K, nothing special.
Posted Image
  • 0
Perche Germolgi. [Because it shoots]

Rainbow Clan

#2042 itslikethis

itslikethis

    Member

  • Members
  • 1 posts

Posted 25 April 2009 - 11:09 PM

AR's removed and barrel mod

Posted Image

Posted Image
  • 0

#2043 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 25 April 2009 - 11:19 PM

This is the most creative idea ever. I love it!

THIS IS NOT A THREAD FOR DISCUSSION. Enjoy your 1-week suspension.

Filliam H. Muffman
Posted Image

Edited by CaptainSlug, 26 April 2009 - 04:51 PM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#2044 xCraiG iZ BeasT

xCraiG iZ BeasT

    Member

  • Members
  • 28 posts

Posted 26 April 2009 - 08:13 PM

This is my singled longshot dressed in a gloss black and copper paint job.
Posted Image
And this is my cpvc big bad bow.
Posted Image
  • 0
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.


Get some real tools. Man tools. You're not getting it out with scissors. -Wes7143

#2045 Tigadee

Tigadee

    Member

  • Members
  • 77 posts

Posted 26 April 2009 - 09:53 PM

xCraig - Your LS pic has given me inspiration for my next LS - a metallic blue and gold beast...

Thanks everyone for the warm welcome and encouraging comments! It's a great forum that has responsive members and makes it worth being part of!

Here's my 2nd LS - "Lady o' Death in Red"...
-
Posted Image
-
Posted Image
-
Posted Image

Much as I like weathering for that realistic battle-worn look, I'm finding I prefer clean and tidy better. Especially if I'm gonna be selling them off, some potential buyers may think that it's used! LOL!
  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#2046 guitarman

guitarman

    Member

  • Members
  • 1 posts

Posted 26 April 2009 - 10:39 PM

I AM AN IDIOT FOR TRYING TO REPLY TO A POST FROM WEEKS AGO AND USING ONLY TEXT IN A PICTURES ONLY THREAD, THEREFORE I HAVE BEEN SUSPENDED FOR TWO WEEKS.
  • 0

#2047 nerfnukerz

nerfnukerz

    Member

  • Members
  • 23 posts

Posted 27 April 2009 - 06:48 PM

Yay! My big bad bow with cpvc breech!
Posted Image
Breech open:
Posted Image
The thing you can see inside the barrel is the device that pushes darts up.
  • 0
Now you're dead.

#2048 Tigadee

Tigadee

    Member

  • Members
  • 77 posts

Posted 27 April 2009 - 09:24 PM

Thanks again for the kind responses and comments. This forum is very welcoming and active, really appreciate the atmosphere here.., I'm really digging RECONs as pistols now.
-
Posted Image
-
Posted Image
-
Bolt Pistol from Warhammer 40K (or close to one in the game hopefully):
-
Posted Image
-
Posted Image
-
Posted Image
-
Here's my 'stainless steel' MAVERICK:
Posted Image

I guess I should weather them (make them look used), but like them as they are at the moment and will weather them eventually, maybe...

Edited by Tigadee, 27 April 2009 - 09:30 PM.

  • 0
No matter where you go, there you are ~ Buckaroo Banzai

#2049 Norther of Heaven

Norther of Heaven

    Member

  • Members
  • 349 posts

Posted 28 April 2009 - 01:53 AM

My first ERTL PAS. Due for a PJ any day now.
Posted Image

I added FBR to reduce the sound. Does an amazing job if i do say so myself.
Posted Image

Also, since the front of the gun carries the majority of the weight, I glued some copper BBs inside the stock to make it heavier. The same to the cocking handle.
Posted Image

This bad boy is equipped with the stock spring, LS spring, and a 1st gen BBB spring.
Posted Image

- The trigger spring(s) were made from the front (orange) attachment's AR spring.
- I added hot glue to further compress the springs on the plunger rod.
- Has a section of nail put inside the brown piece to prevent the stefan from being vacuum-loaded too far and into the plunger.
- PVC coupler epoxied on.
- Uses CPVC as barrel material for now. Getting PETG soon.
- Range: ~95 ft.
  • 0
"I don't always drink beer. But when I do,
I beat my wife."

#2050 mbisc8

mbisc8

    Member

  • Members
  • 29 posts

Posted 28 April 2009 - 08:05 PM

Well, my Recon is painted with Red Tiger camo (but I didn't have enough money for paint so I used Sharpie). But I didn't do much mods to it. I only did basic AR removal and spring replacement. (Sorry I couldn't edit the picture)
Posted Image
  • 0
I like things.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users