Posted by BritNerfMogul on 09 October 2012 - 06:46 AM in Modifications

Banana clip made from an 18 round stick mag and the clip from a x-shot thundershot

Holds 16 rounds, and fits in everything but the recon/retaliator.

Posted by BritNerfMogul on 16 October 2012 - 09:05 AM in Modifications

STOP YOUR GRINNING AND DROP YOUR LINEN!!!

Posted by BritNerfMogul on 19 October 2012 - 10:57 AM in Modifications

Just need a new RFR to finish the whole loadout off.

Posted by BritNerfMogul on 15 December 2012 - 06:27 PM in Modifications

Just a few cosmetic touches left, and then my masterkey is complete.

Posted by BritNerfMogul on 28 September 2012 - 05:38 AM in Modifications

Ready For HvZ

Posted by BritNerfMogul on 11 August 2012 - 05:31 PM in Modifications

Will paint it properly when I have a job. Again

Posted by BritNerfMogul on 30 June 2012 - 03:27 PM in Modifications

Because I can't afford to buy a Massacre Kit, and have the brain power to make my own.

Posted by BritNerfMogul on 16 July 2012 - 12:07 PM in Modifications

Finally found a use for one of the 2 side rails I had to sacrifice for my 2nd generation Pulse Rifle.

Surprisingly comfy, and very solid. The rail is simply screwed to the shell using the existing screw ports in the rail. Now I know that it works, I'm working on trimming the rail down so it sits a little lower on the shell.

EDIT:







Much happier now.

Posted by BritNerfMogul on 11 August 2012 - 05:27 PM in Modifications

Will paint it properly when I have a job. Again

Posted by BritNerfMogul on 21 February 2013 - 11:20 AM in Modifications

Winchester 1887-esque RFR

Posted by BritNerfMogul on 28 February 2013 - 07:42 PM in Modifications

Mass Effect themed stryfe I've just finished for an upcoming event:

Posted by BritNerfMogul on 29 May 2013 - 04:54 PM in Modifications

Whilst hunting zombies at night during https://www.facebook.../DarkTempusLarp, I discovered a slight problem with my retaliator, in that to use my torch I either had to lose my vertical grip or lose my sight. So I went all COD on it and fixed it.
QUAD RAILS BABY!

Posted by BritNerfMogul on 08 August 2013 - 10:00 AM in Modifications

WIP WWII Themed Stampede:


EDIT: Decided to finish it!

Posted by BritNerfMogul on 24 September 2013 - 11:05 AM in Modifications

Steampunk Rayven, with 9v Battery upgrade.

Posted by BritNerfMogul on 21 May 2013 - 01:13 PM in Modifications

Made use of my left over rail from the R90.

Posted by BritNerfMogul on 16 May 2013 - 01:22 PM in Modifications

COMBO BREAKER!

Rocking it old skool baby!

Posted by BritNerfMogul on 12 April 2013 - 10:41 AM in Modifications

First couple of blasters to be comissioned under my new business name: https://www.facebook...HigsonArmouries



Rust effect

"Woodgrain"

Winchester

Posted by BritNerfMogul on 19 April 2013 - 05:25 PM in Modifications

Just needs a stock, side plates on the foward grip and clean up the shell. Plus paintjob obviously.

Posted by BritNerfMogul on 23 April 2013 - 02:14 PM in Modifications

For kicking ass and taking names...

Posted by BritNerfMogul on 17 May 2012 - 02:34 PM in Modifications

IT'S GAME OVER MAN! IT'S GAME OVER!

Posted by BritNerfMogul on 29 February 2012 - 10:33 AM in Modifications

Made some modifications to my Longstrike. Added a Spring from a RFDG, and the barrel piece comes from an off-brand m14 dart blaster I bought from UmbrellaCorp. Gives it a more 'rifle' like feel for me. And the ironsights work really well.

Posted by BritNerfMogul on 19 June 2010 - 03:56 PM in Modifications

Also, newest addition to the Britbow:


PIcture of the damage to the BritBow. Just as I got it working.

BOLLOCKS

Posted by BritNerfMogul on 30 June 2010 - 01:13 PM in Modifications

Brit got quadshot. Is happy now



So far, I've removed the AR's, and added an o-ring to the PT.
Need to order some more brass to fix the turret, I'm keeping the 3 shot feature. Also going to build a wooden stock.

PS - these are the original lanard ones, not the airzone ones. There's no real difference, but if you are desperate for a lanard one, hit me up with a PM.

Also, My first paint job in a LONG time. I'm waiting on a delivery of 3 Ironman Firefly's, so I practiced my paint scheme on this old busted mav

Posted by BritNerfMogul on 11 August 2010 - 02:50 PM in Modifications

Will be receiving a PJ when my paint arrives

Posted by BritNerfMogul on 19 June 2010 - 02:22 PM in Modifications

SWOOSH!!!

Transformers StarScream Blaster. Modified with 2" Butyrate barrels, and no ar's. Makes an awesome shield

Also makes a good blaster.

Chucked some Butyrate into the ammo holders so I could put micro's in there. They were built of mega's

Posted by BritNerfMogul on 20 September 2009 - 07:24 AM in Modifications

Epoxy has cured, so I thought I'd show you guys a pic of the whole thing...

Posted by BritNerfMogul on 01 August 2009 - 09:34 AM in Modifications

Some of my stuff I've been working on (besides from work and my house):


Failed ArrowFinder

Speedloading Hornet - with brass

WIP Big British Bow

Union Jack

Posted by BritNerfMogul on 13 August 2009 - 02:29 PM in Modifications

'Big Bertha'


Don't worry, the black coat is a base coat ONLY!

Posted by BritNerfMogul on 23 August 2009 - 11:16 AM in Modifications

And so the work begins......



*evil laugh*

Posted by BritNerfMogul on 22 August 2010 - 04:02 AM in Modifications

QUADSHOT COMBO BREAKER!!!!

@ SonReeceSonJenson - Sadly I don't. I use some cycling glasses with replacable lenses so depending on my mood depends on which lenses I use. Most of the time I use the yellow lenses.

And to keep the thread on topic:

Posted by BritNerfMogul on 11 September 2010 - 01:08 PM in Modifications

URRAH MARINES!!!




I will have the first painted Stampede, whether it kills me or not...

Posted by BritNerfMogul on 15 June 2011 - 11:51 AM in Modifications

WIP Titan

EDIT:
Decided to finish it

Posted by BritNerfMogul on 26 June 2011 - 03:36 PM in Modifications

My LS just got Slugged....

Stock LS + CS PA grip. Just need to rubberize the grip to make priming easier.

Posted by BritNerfMogul on 12 July 2011 - 08:41 AM in Modifications

Current WIP - Internal RSCB Buzzbee Hunter.



Reloads through the original bolt:


MONEY SHOT!

Posted by BritNerfMogul on 14 June 2011 - 02:23 AM in Modifications

RETRO IN THE HOUSE!!!

Posted by BritNerfMogul on 17 December 2010 - 04:54 AM in Modifications

Resin modded my crossbow as well a.k.a. Ironbow. It's got a loooooonnnnng way to go before it's finished, but it's a start. Pictures are absolute shit, but you get the idea. Credit goes to Team Slaya, Msdfs, Split, Ice spartan, Ice, Diamondback, Coop, Wes, and N9 for the shell work/internals work.

Credit also goes to Lucian for the Resin idea. I suggest everyone do this to a gun that they love/will love.

I think you're missing someone in that Credit list, don't you?

My new red dot sight

With this new shape, it now fits under the stampede comfortable.

Posted by BritNerfMogul on 16 September 2010 - 05:42 AM in Modifications

I AM GRZ GRRRRRR!!!!



And I always said the n-strike rail on the BritBow would be useful...

Posted by BritNerfMogul on 08 October 2010 - 05:18 AM in Modifications

Posted by BritNerfMogul on 30 October 2010 - 04:23 PM in Modifications

Okay, I lied before. The last shot of my stampede was a fake. There's a reason that I only showed it from one side. I hadn't painted the other side. So I finished it:


Check these details...

Posted by BritNerfMogul on 22 May 2009 - 05:42 PM in Modifications

Commission job for a friend. He wanted something m4 based.






Only on it's first coat of paint, second coat going on soon. Also working on a AT3k Scatter scope ala Rogue for an underslung grenade launcher.