- NerfHaven
- → nerfkid3's Content
nerfkid3's Content
There have been 46 items by nerfkid3 (Search limited from 07-December 96)
#169092 Nite-mav
Posted by nerfkid3 on 14 August 2008 - 01:41 PM in Modifications
#193017 Riot At Chinese Nerf Factory
Posted by nerfkid3 on 30 November 2008 - 02:20 PM in General Nerf
--------------
92% of teens have moved on to rap.
If you are part of the 8% who still listen to "real music",
copy and paste this into your signature
#193174 Night Finder Mod
Posted by nerfkid3 on 30 November 2008 - 10:11 PM in Modifications
I don't have any pics right now but here is the discription (Sorry about the spelling).
I modded my NF with 1/2 inch copper piping.
The copper sticks out from the end of the shell about 3 and 1/8 inches.
So far I have not seen a much difference in ranges except it might get about 3-4 feet more direct fire.
It is a little louder when dry fired but otherwise it has no noise difference.
It seems to firer any dart it could before but works better with the stock refill darts with the blue tips.
I'll try to get pics and ranges after school tomorrow.
Nerfkid 3
Here are the ranges(the best i could do in the house(because it was snowing))
stock NF refill darts 13-14 1/2 Feet
The firefly darts with the glowing paper (better seal) 13 1/2 - 16 feet.
#193180 Accessory: Ammo Wristband
Posted by nerfkid3 on 30 November 2008 - 10:21 PM in Modifications
#193181 Night Finder Mod
Posted by nerfkid3 on 30 November 2008 - 10:24 PM in Modifications
#193186 Night Finder Mod
Posted by nerfkid3 on 30 November 2008 - 10:33 PM in Modifications
First I am not sure what kind of copper it is except my Dad had it left over from plumbing the basement.What kind of copper are you using? On my NF, the only darts that fit are the Log Home white darts. Anything else is way too loose. Is that measurement how far it sticks from the barrel? Mine is about 6 inches (or maybe a tad less, I can't remember of the top of my head), and gets 50 ft with white darts, and 60 with bungees.
Second The 3 and 1/8 is from were the the shell ends not counting whats [u][b]IN THE GUN.
Third I'll get you the ranges on mine tomorrow.
#193246 Night Finder Mod
Posted by nerfkid3 on 01 December 2008 - 07:56 AM in Modifications
No it is not. I just took my stock (with the AR taken out) night finder and replaced the plastic barrel with a copper one.Whoops, slipped my mind. Is it minimized in any way?IN THE GUN.
#193295 Internal At3k Inline Clip
Posted by nerfkid3 on 01 December 2008 - 04:36 PM in Modifications
#193376 Crossfire
Posted by nerfkid3 on 01 December 2008 - 09:22 PM in Modifications
#193381 Cheap Noise Maker To Nerf Gun/
Posted by nerfkid3 on 01 December 2008 - 09:45 PM in Modifications
Sorry that the best picture I had had my copper NF in it.
The metal is for extra support because I broke it trying to cock it the first time.
These are the two springs I put in each other for more power.
It gets about 24 feet with stock whistling darts, 20 feet with stock firefly darts and, 18-19 feet with stock NF and maverick refill darts.
If this is dislike the post reply me and I will take it off.
#193390 Cheap Noise Maker To Nerf Gun/
Posted by nerfkid3 on 01 December 2008 - 09:55 PM in Modifications
So how did you actually modify it? I hate it when people post things without explanation.
I took off a plastic cover from the end of the barrel then I took out the weak stock spring and put in the two stronger spring that I have in the picture.
#193398 Cheap Noise Maker To Nerf Gun/
Posted by nerfkid3 on 01 December 2008 - 10:05 PM in Modifications
Sorry I did not realize that I spell then 'thin' it was not on purpose and to think a little while ago I was telling a very new guy to clean up his grammar because it was his fastest way out of Nerf Haven.So how did you actually modify it? I hate it when people post things without explanation.
I took off a plastic cover from the end of the barrel then I took out the weak stock spring and put in the two stronger spring that i have in the picture.
Thank you, I was unaware that it had an actual barrel since you described it as a noise maker. Also clean up your grammar a little.
#193404 Cheap Noise Maker To Nerf Gun/
Posted by nerfkid3 on 01 December 2008 - 10:16 PM in Modifications
Sorry I did not realize that I spell then 'thin' it was not on purpose and to think a little while ago I was telling a very new guy to clean up his grammar because it was his fastest way out of Nerf Haven.So how did you actually modify it? I hate it when people post things without explanation.
I took off a plastic cover from the end of the barrel then I took out the weak stock spring and put in the two stronger spring that I have in the picture.
Thank you, I was unaware that it had an actual barrel since you described it as a noise maker. Also clean up your grammar a little.
Probably but like I said I made it in the blink of an eye And sput nut Herpestidae told me to fix my grammar one of my posts but I fixed it.
#193419 Big Blast With Integrated Recon Laser Light
Posted by nerfkid3 on 01 December 2008 - 10:51 PM in Modifications
#193466 Night Finder Mod
Posted by nerfkid3 on 02 December 2008 - 07:34 AM in Modifications
stock NF refill darts 13-14 1/2 Feet
The firefly darts with the glowing paper (better seal) 13 1/2 - 16 feet.
Wait a minute, from the probable 20+ feet of stock it became around 15?
Explain.
It shot the full distance of my range in my basement and it hit the wall with a thud.
#196873 The Phoenix
Posted by nerfkid3 on 17 December 2008 - 10:06 PM in Modifications
#206412 The Vulcan Problem
Posted by nerfkid3 on 25 January 2009 - 07:43 PM in Modifications
#206419 The Vulcan Problem
Posted by nerfkid3 on 25 January 2009 - 07:56 PM in Modifications
#206771 The Vulcan Problem
Posted by nerfkid3 on 26 January 2009 - 10:00 PM in Modifications
#206774 Need A Good Maverik Mod
Posted by nerfkid3 on 26 January 2009 - 10:07 PM in Modifications
#211210 Mulcher
Posted by nerfkid3 on 10 February 2009 - 06:49 PM in Modifications
Anyone at the Haven has access to petg through OMC. Oh and by the way nice job I love the dry brushing.
#213362 Stefans
Posted by nerfkid3 on 18 February 2009 - 09:32 PM in Modifications
#214321 Mod' Help "good Samaritan"
Posted by nerfkid3 on 22 February 2009 - 09:22 PM in Modifications
nerfer9987 I think this would be really a good idea and I might have to try to make one.
~~~~NK3
#215970 The Official Internals Directory
Posted by nerfkid3 on 02 March 2009 - 06:03 PM in Modifications
Its nice to see that people from that sudden inflow in September to December Are really bring something to the site.
#216649 A Few Bbb Questions
Posted by nerfkid3 on 06 March 2009 - 05:50 PM in General Nerf
1. How far does it shoot arrows with the AR's taken out?
2. Can it be modded to shoot stefens? I think I saw that some were but I didn,t see anything in the mod directory or when I searched.
Thank in advance for any help sorry about the noob questions.
NK1
#216654 A Few Bbb Questions
Posted by nerfkid3 on 06 March 2009 - 06:03 PM in General Nerf
#218241 Tommy 20 Rail?
Posted by nerfkid3 on 16 March 2009 - 11:10 AM in General Nerf
The same thing here I just took a fine file and it worked fine.While messing with my Tommy 20 today, I realized that that was a blue rail on top.I then went and got my Longshot scope, but the rail was too big for it,Then I realized that my airsoft sight fit it, and was actually somewhat accurate, as in it usually hit the door/mirror/couch I was shooting at.But has Buzz Bee made any attempt to market accesories for the rail? And before you ask, Yes I searched, and found nothing,
They have not marketed any accessories for that rail, nor do I remember seeing it on anything else. It's nice that your airsoft accessory fit, but honestly, it's kinda pointless.
#218473 Singled Recon?
Posted by nerfkid3 on 17 March 2009 - 03:47 PM in Modifications
Ive got 80 out of a NF(Mavrick spring added ) with good stefens but it had accuracy worth shit I added a cpvc no it get 62 average with decent accuracy.
#221222 April Fools Prank
Posted by nerfkid3 on 02 April 2009 - 02:53 PM in Off Topic
#227809 Recon Forgrip Mod
Posted by nerfkid3 on 03 May 2009 - 12:49 AM in Modifications
A word for the wise, Read the CoC and memorize it by heart or you will die here.
Also do not argue with admins or anybody that is disrespectful which is bad to do to anyone no matter if they are a member, contributor, or ADMIN
And from now on use proper grammar my 10 year old brother writes better then you and he has a learning disability. As well as don't post more then once use the edit button.
Last but not least use the search function before you post a mod because it might have already been done.
Nk3
-------------
#227811 Ls Help
Posted by nerfkid3 on 03 May 2009 - 12:55 AM in Modifications
#227814 Vulcan Jamming Heavily?
Posted by nerfkid3 on 03 May 2009 - 01:04 AM in Modifications
Hope it helps
Nk3
---------------
#230161 Lbb (lanard Blast Bazooka) Modification Write Up Video Added
Posted by nerfkid3 on 14 May 2009 - 02:40 PM in Modifications
On topic very nice and clean. I like it.
#231879 Cuttin' Longshots
Posted by nerfkid3 on 22 May 2009 - 03:21 PM in General Nerf
you could use that but it would probably be best to get a jigsaw. ( I am lucky to have a very handy father with a FULL machine shop in the basement).
Also good luck with your job ahead.
#231976 An Open Letter To New Posters And Anyone On The Waiting List!
Posted by nerfkid3 on 22 May 2009 - 09:29 PM in General Nerf
Thank you to Talio, Omc,Vacc,Slug, Groove,Black Sun Shine, and all others for what you do for all US complete strangers.
Nk3
- NerfHaven
- → nerfkid3's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·