XaMMaX211's Content

#201110 The Tigershark

Posted by XaMMaX211 on 04 January 2009 - 06:58 PM in Modifications

This also works with the airtech 2000, right?
(Sorry for nooby question)

#201296 The Tigershark

Posted by XaMMaX211 on 05 January 2009 - 06:02 PM in Modifications

how the hell do you get the tabs out of the crayolas

#196434 Stefan Sizes?

Posted by XaMMaX211 on 15 December 2008 - 09:20 PM in Modifications

I use 1.5 to save foam.

#196431 Stefan Sizes?

Posted by XaMMaX211 on 15 December 2008 - 09:13 PM in Modifications

Well, idk if this is the right board, but what is a good size for Stefans?

#195490 Rusty Screw Halp And Led Help

Posted by XaMMaX211 on 11 December 2008 - 05:59 PM in Modifications

But if you must use LED christmas lights, find one of the small strings and just use all the lights with the built in battery container, I'm sure you can find some place to put it in the LS shell, there's a shit-ton of space in there.

saywat? small strings? Built in battery container? and btw, I'm putting them in my Maverick... I'm never going to be a good modder...

#195481 Rusty Screw Halp And Led Help

Posted by XaMMaX211 on 11 December 2008 - 05:36 PM in Modifications

OK, so my longshot's screws wont budge, they're rusted... :unsure:

here's some pics:

Posted Image

you cant really see them in the pics... anyway, I need halp getting them out. also, About LED's, do I need a resistor If I am using LED christmas lights (4) connected to the same 9V battery? if so, what kind?

#195502 Rusty Screw Halp And Led Help

Posted by XaMMaX211 on 11 December 2008 - 06:27 PM in Modifications

a 9v and 2 AA batteries put out very different voltages.

which one should I use then?

#195602 Rusty Screw Halp And Led Help

Posted by XaMMaX211 on 12 December 2008 - 12:45 AM in Modifications

ok, I got it, I'm using three little watch batteries to power two Christmas tree LED's no resistors. I am also using a five prong switch, any help there? like where to connect and stuff

#211518 New Type Of Shotgun Dart

Posted by XaMMaX211 on 11 February 2009 - 06:42 PM in Modifications

I used to make these, but with 1cm long fbr on each end

#230028 Mag Bladder Casing

Posted by XaMMaX211 on 13 May 2009 - 04:26 PM in Modifications

I think it would make your life a bit easier to just keep the casing, taking it off just ads more work. If you do take it off, then I suggest using a very strong glue.

gonna try a hose clamp, but since I have a topic, I just wanted to ask: what size tubing does the magstrike use, 1/4 in.? and if I wanted to buy a pump, as in something like an AT2K pump, where would I buy it and what would it be called?

#230178 Mag Bladder Casing

Posted by XaMMaX211 on 14 May 2009 - 03:40 PM in Modifications

find a dual action mini bike pump. You can get them from walmart, but if you have a bike store around you they probably have a better selection.

I still need to know the tubing size

EDIT: I mean the vinyl tubing

#229733 Mag Bladder Casing

Posted by XaMMaX211 on 11 May 2009 - 11:14 PM in Modifications

Well, I get the mag bladder out of the casing, and without glue, the bladder, just pops off the ribs, so, what I was wondering was, can I just glue the badder onto the ribs, and be safe, or should I keep the casing?? If I keep the casing, I know it wont explode or anything, but it's so bulky, I want your word on this.

#208349 Halo 3 scumbag Rifle

Posted by XaMMaX211 on 31 January 2009 - 06:54 PM in Modifications

I propose we get angel, slug or ice to do it they have proven them selves smart and skilled enough to do this

yeah, but before they were... "Famous", they all started with a good mod, let this guy's be the sniper (I said sniper!)

#211468 Breech That Worked With Longshot Magazines

Posted by XaMMaX211 on 11 February 2009 - 05:29 PM in Darts and Barrels

thanks, guys, I thought it was only cpvc and pvc or something, sorry, can anyone think of a clip breech for cpvc then?

#211477 Breech That Worked With Longshot Magazines

Posted by XaMMaX211 on 11 February 2009 - 05:40 PM in Darts and Barrels

There is no pvc and cpvc breech. Unless you have a lathe. There is not a cpvc breech with only cpvc unless you use nano's or mili's(if they exist).

nanos as in the darts?

#211456 Breech That Worked With Longshot Magazines

Posted by XaMMaX211 on 11 February 2009 - 05:11 PM in Darts and Barrels

Hi, I remember seeing a breech that worked with longshot magazine and I searched and searched but could never find it, can someone please direct me to it?

#211491 Breech That Worked With Longshot Magazines

Posted by XaMMaX211 on 11 February 2009 - 06:04 PM in Darts and Barrels

nanos as in the darts?
Yes. They use 3/8 foam instead of 5/8 or 1/2. They have more range, but less accuracy.

I use 1/2 fbr, but I can put 3/4 cpvc over the 1/2cpvc

#211459 Breech That Worked With Longshot Magazines

Posted by XaMMaX211 on 11 February 2009 - 05:17 PM in Darts and Barrels

search: angel breech

no, a breech for a pistol or something, and if you know how to make one with cpvc, can you please tell me?