Uncle Hammer's Content

#84832 Modification and Paintjob Pictures

Posted by Uncle Hammer on 12 July 2006 - 12:03 AM in Modifications

Falcon check out the mods section, it's a pretty nifty concept from short shit. Theres a detailed write up explaining everything in the mods section.

#76824 Modification and Paintjob Pictures

Posted by Uncle Hammer on 19 March 2006 - 12:09 AM in Modifications

My aresnal...

Thats just about all the guns that are worth using.

This baby is my 1500 which has been modded with some 9/16 brass in some PVC.

This is my 2k that has been pistol modded sorta and can shoot megas. Has a blue liquid
gauge too.

This is my 750 which is basically my all time favorite pistol. PETG modded.

#66211 Modification and Paintjob Pictures

Posted by Uncle Hammer on 20 October 2005 - 11:07 PM in Modifications

That would be the internals of a sm750.

#67039 Modification and Paintjob Pictures

Posted by Uncle Hammer on 02 November 2005 - 10:53 PM in Modifications

A tek ten thats been all chopped up and put in different places. It's kinda like a jigsaw puzzle.

#94914 Modification and Paintjob Pictures

Posted by Uncle Hammer on 20 November 2006 - 11:56 PM in Modifications

Then your ranges aren't accurate. Typically ranges posted are ones that you would use the average pumps for the gun, not overkill pumping it to get it to shoot 100's of feet. Nice mod though, 750's are the shit, I've always has spectacular results with my petged old and new editions.

#97380 Modification and Paintjob Pictures

Posted by Uncle Hammer on 29 December 2006 - 08:22 PM in Modifications

No offense but thats hideous and lacking in the range department. My quad brassed 1500 outshoots your single barrel and it looks alot more sexy.

#101330 Modification and Paintjob Pictures

Posted by Uncle Hammer on 22 March 2007 - 11:26 PM in Modifications

That green paintjob on the SSII looks almost natural like it was made that way, I love it.

#86681 Longshot Mod

Posted by Uncle Hammer on 07 August 2006 - 11:23 AM in Modifications

Great mod carrton, this really helped me out with mine. Has anyone given any thought to sticking some 17/32 brass where the restrictor was and then nesting some 9/16 into the main barrel? I think it would make a pretty good seal and the foam nerf uses fits 17/32 pretty tight, which is what you want in a springer. It would a typical crossbow nesting set up. About 2 inches of 17/32 and about 8-12 of some 9/16. When I get my hands on a dremel and some more brass I'm going to give it a shot. I also need a 3b spring or something similar.

#89386 Longshot Mod

Posted by Uncle Hammer on 09 September 2006 - 11:54 AM in Modifications

This should do the trick. You might have some added pressure to the plunger tube after adding a new spring which causes it to push forward a bit.

#67519 Where To Buy Modding Materials

Posted by Uncle Hammer on 12 November 2005 - 12:11 PM in Modifications

FBD!!! It's FBR bud. And all those items except PETG can be bought at Home Depot or Lowes.

#67540 Where To Buy Modding Materials

Posted by Uncle Hammer on 12 November 2005 - 04:43 PM in Modifications

I have a question about where to buy the material for making arrows and the materials name.

You want some type of piping insulation which can be found at most hardware stores.

#219193 The Official Internals Directory

Posted by Uncle Hammer on 21 March 2009 - 11:18 PM in Modifications

Not sure how piney feels about his pictures, so I'll just link them for you to decide what to do with them. I knew I had remembered seeing some triple torch internals somwhere, a quick glance at his blog and I found what I was looking for.

Picture One
Picture Two

#60063 Nerfers Nerfing Disease

Posted by Uncle Hammer on 24 July 2005 - 01:27 PM in Off Topic

Currently 4000/5000 done. Is 5000 a big WU?

#59967 Nerfers Nerfing Disease

Posted by Uncle Hammer on 23 July 2005 - 11:44 AM in Off Topic

Do you have to finish a WU to make it on the list? My computer is still working on a rather large one.

#60304 Nerfers Nerfing Disease

Posted by Uncle Hammer on 27 July 2005 - 02:09 AM in Off Topic

You know you can see that info yourself right? Go to the front page and click our team link in Cx's post. I think this is what your trying to ask right?

#62898 Nerfers Nerfing Disease

Posted by Uncle Hammer on 01 September 2005 - 08:28 PM in Off Topic

Wow we passed my local college. Coolness.

#62367 Baghead's Maverick Mod

Posted by Uncle Hammer on 21 August 2005 - 10:19 PM in Modifications

Somehow thats also hauntingily disturbing and grotesque.

#89159 New Longshot Mod/integration

Posted by Uncle Hammer on 05 September 2006 - 08:35 PM in Modifications

Or you can not hijack the thread... Half the posts were just about a name for a gun that wasn't even the topic of this topic. I already said nice mod, but since I'm posting again. Nice job.

#88910 New Longshot Mod/integration

Posted by Uncle Hammer on 03 September 2006 - 04:11 PM in Modifications

Now THAT is truly badass.

#66212 Cars

Posted by Uncle Hammer on 20 October 2005 - 11:09 PM in Off Topic

Mustangs my ass... Chevelles and GTO'S rock the mustang.

#100796 C.s.h.g.

Posted by Uncle Hammer on 04 March 2007 - 08:26 PM in Homemades

Thats propelling 6mm bb .2 gram bb's, not fullsize nerf darts.

#309478 Nerf Rayven - Mod Guide!

Posted by Uncle Hammer on 14 January 2012 - 02:17 AM in Modifications

80-100 ft from a FLYWHEEL?

Do I smell integration?

More like ozone.

#72093 First Attempt At A Homebrew Gun

Posted by Uncle Hammer on 01 February 2006 - 10:49 PM in Homemades

This is the topic with a double spring used in a water type pistol. It got 100 ft after starbuck modified it. Linkage

#53365 List Of All Guns Ever Made

Posted by Uncle Hammer on 24 April 2005 - 04:31 PM in General Nerf

For non-nerf check vipers site he has alot of guns like that on there.

#74179 Fall '06 Blasters

Posted by Uncle Hammer on 24 February 2006 - 06:54 PM in General Nerf

Even if the longshot sucks. That sure is one fine ass looking case. It has integration written all over it. Who wouldn't have a field day with that thing?

#74057 Fall '06 Blasters

Posted by Uncle Hammer on 23 February 2006 - 10:24 PM in General Nerf

I fucking knew the magstrike had PC written all over it.

#57888 Semi-auto At2k Maverick

Posted by Uncle Hammer on 21 June 2005 - 05:57 PM in Modifications

Pretty nice mod, but its kinda fugly. Although the 2k inside it was integrated very cleanly. sneakup you should really work on your grammar and puncuation.

#88560 The Snap-1 Mk2

Posted by Uncle Hammer on 29 August 2006 - 10:11 PM in Homemades

You joined two months ago and your already telling people to read the CoC and to use grammar and puncuation. Why not let the admins do their job and not telling new people what they can and can't or should do. Although his post didn't abide by the CoC, it wasn't really a necromancy. He was just commenting on how it was a nice write up and how he would like to build one. I really don't see the harm as long it's not something stupid.

#65975 Grammaton Cleric's Sidearm

Posted by Uncle Hammer on 16 October 2005 - 10:24 PM in Homemades

Damn, how much would you say of the work requires dremeling? Like is it pretty much impossible to make one with a kit without a dremel?

#65906 Grammaton Cleric's Sidearm

Posted by Uncle Hammer on 16 October 2005 - 01:21 AM in Homemades

I'm intertested, but I have no dremel. :sadface:

#65963 Grammaton Cleric's Sidearm

Posted by Uncle Hammer on 16 October 2005 - 08:15 PM in Homemades

So what about those people without dremels?

#65151 Grammaton Cleric's Sidearm

Posted by Uncle Hammer on 05 October 2005 - 10:15 PM in Homemades

Simply amazing and the performance sounds great. I can't wait for the plans, I'm so builidng one of these. I'm simply awed, great job.

#65666 Grammaton Cleric's Sidearm

Posted by Uncle Hammer on 12 October 2005 - 10:34 PM in Homemades

Will they be painted?

#65721 Grammaton Cleric's Sidearm

Posted by Uncle Hammer on 13 October 2005 - 08:50 PM in Homemades

I'm gonna take a guess on how much these will sell for. My guess is about a good 60 dollars and up.

#65402 Grammaton Cleric's Sidearm

Posted by Uncle Hammer on 09 October 2005 - 07:07 PM in Homemades

Ar15 springs can be bought online I'm pretty sure. You might have to be 18 to order one though, nothing your parents couldn't do.

#65500 Grammaton Cleric's Sidearm

Posted by Uncle Hammer on 10 October 2005 - 10:24 PM in Homemades

Ya this thing out shoots a FAR, but the FAR shoots megas.

#141655 Nerf Eliminator And Hyperfire

Posted by Uncle Hammer on 21 February 2008 - 12:13 AM in General Nerf

Potential has nothing to do with it, each of there guns is designed with safe in mind. They know damn well the potential of the guns before putting them into production. The fact is, theres just a changing market and they're trying to keep up. Goo gauges are out and big war type guns are in.

Haven't seen any comments on the Wii gun, it looks pretty bitching whether you use it for a wii or not.

Uncle Hammer's Content

By content type

See this member's

Sign In