- NerfHaven
- → CD-R's Content
CD-R's Content
There have been 99 items by CD-R (Search limited from 07-December 96)
#103236 Rifled Barrels
Posted by CD-R on 30 April 2007 - 07:12 PM in Homemades
Basically, you get a piece of brass that fits in side your barrel ( I use CPVC) and put aslice in the end of it about 1/4 of an inch long. After that, you fold out the area near the slice just a few degrees to make a sharp corner. You will have to do some experimenting to find out how much you bend out the brass, as it depends on barrel type. Next is the tricky bit, take the brass, and heat it up on a gas stove until your flame starts to turn green. (This part is dangerous, make sure you wear heat proof gloves when holding the barrel and the brass that you can get off if the heat starts to get through. Also, like I need to tell you guys this, but try not to burn your house down, and immediately after using the heated metal, dunk it in a bucket of water to cool it down). After the metal is heated, jam it down the barrel while twisting it at a constant rate. Then pull it out while making sure that the threads go the same way. Repeat this afew times to get the barrel sufficiently rifled.
The method is crude, yet efffective. I don't know if it's just me, but I feel that my shots go straighter with barrels treated this way; however, I don't have any data to back this up.
#103832 First Homemade
Posted by CD-R on 03 May 2007 - 08:30 PM in Homemades
I am not trying to criticize you, or doubt your design. I would just like to know how you made something that powerful.
#103853 Lcm Summer Tune-up
Posted by CD-R on 03 May 2007 - 09:45 PM in Nerf Wars
#104307 Smoke Bombs
Posted by CD-R on 06 May 2007 - 09:13 PM in Off Topic
And as for shooting them out of a gun? Well sure, let's shoot burning chunks of chemicals at each other. I think it would be cool to do, but unfortunately, it's just too dangerous.
#104376 Smoke Bombs
Posted by CD-R on 07 May 2007 - 02:29 PM in Off Topic
#104439 Bulk Ordering Foam
Posted by CD-R on 07 May 2007 - 07:05 PM in Off Topic
#104493 Bulk Ordering Foam
Posted by CD-R on 07 May 2007 - 10:00 PM in Off Topic
#104587 Epoxy
Posted by CD-R on 08 May 2007 - 08:24 PM in Off Topic
#104732 Bullies!
Posted by CD-R on 09 May 2007 - 09:07 PM in Off Topic
#105175 Measuring Ranges
Posted by CD-R on 12 May 2007 - 10:04 PM in General Nerf
We used a tape measure and chalk to mark out ten foot increments on a straight, flat section of my street. We then wrote the accompanying numbers next to the marks.
This took us only about two to three minutes to do. This method was very simple, and gave us very accurate measurements. It's really basic, but I figured I'd post about it in an attempt to help reduce the amount of inaccuracy pertaining to gun ranges.
#105179 Lcm Summer Tune-up
Posted by CD-R on 12 May 2007 - 10:16 PM in Nerf Wars
OMC I'll just send the money for the foam with some one else, probably a kid named max. Do you have a scale that you can weigh it on? This way I can compare the two weights to check whether some idiiot stole any of it on the car ride back.
#105314 Splitfire Leak Problem.
Posted by CD-R on 13 May 2007 - 08:12 PM in Modifications
#105333 Splitfire Leak Problem.
Posted by CD-R on 13 May 2007 - 09:18 PM in Modifications
Now I have some time. Ok, so here is a link to where the splitfire's valves are explained:
click here
scroll about 2/3 the way down the page, the post is by falcon.
What I am saying, is you need to find a way to either push the little black rubber seals back into position, or to lubricate them with something to make them seal better. I'm afraid that to do this, you're on your own, as I was not able to fix mine despite numerous attempts.
#106029 Bbb Mod Write Up
Posted by CD-R on 16 May 2007 - 09:32 PM in Modifications
ROAR!!!!This is my first ever Write up, so bear with me.
#106793 Nerf Mines!
Posted by CD-R on 20 May 2007 - 07:09 PM in General Nerf
PS watch where you place any mines, so that only player set them off.
#106849 Your Greatest Moment
Posted by CD-R on 20 May 2007 - 10:27 PM in General Nerf
#106911 Ls Clip Mod For Faster Reloading
Posted by CD-R on 21 May 2007 - 02:34 PM in Modifications
#107006 Mi-ni-mi, Please Reply!
Posted by CD-R on 21 May 2007 - 08:57 PM in Homemades
If this post makes no sense due to a lack of pictures, or horrible use of commas, just tell me.
#107142 Night Battle
Posted by CD-R on 22 May 2007 - 08:15 PM in Nerf Wars
If we bring our own weapons? every body is going to bring their own weapons. Also, the vast majority of people use home made darts. Are you absolutely sure that home made darts not allowed?If you bring your own wepons dont bring stephons.
With that said, using a paintball park sounds pretty cool. I will talk to the other members of our clan, but it sounds a little far away for us.
#107149 The Nasa-3k
Posted by CD-R on 22 May 2007 - 08:21 PM in Modifications
#107151 How Did You Start?
Posted by CD-R on 22 May 2007 - 08:30 PM in General Nerf
No seriously, Z80 and I got into Nerf the same way. I was at our clan's first game about a year and a half ago.
#107248 Clip Tek
Posted by CD-R on 23 May 2007 - 10:03 AM in General Nerf
#107259 Mi-ni-mi, Please Reply!
Posted by CD-R on 23 May 2007 - 01:23 PM in Homemades
Here is the plunger design I was trying to describe two days ago:
Get a small crappy little pump like this:
Rip the check valve off of the front of it, and put a spring on the inside after taking the back part off.
After that, put it back together and use it for whatever you want. The seal between the punger and the tube is really good. I don't know what to do with mine, but I'm sure you people could come up with something.
#107351 Best Possible Mods?
Posted by CD-R on 23 May 2007 - 08:33 PM in Modifications
For range however, I think that the national geographic thing is the best. Then again, with air tank expansions, anything is possible.
#107659 Water Gun Too Nerf Gun
Posted by CD-R on 26 May 2007 - 12:09 PM in Modifications
#107718 Kickback
Posted by CD-R on 26 May 2007 - 10:15 PM in Homemades
Back on topic, I do not think that it is practically possible to make a nerf gun with real kick back. The only toy gun that I have seen with considerate push back, is a CPS 3200 supersoaker. That thing was so powerful that on its highest setting, it could push against you with considerable force (back when I was in sixth grade, that is).
#107721 Nerfers Near Me
Posted by CD-R on 26 May 2007 - 10:21 PM in General Nerf
#108063 Nesting
Posted by CD-R on 28 May 2007 - 09:53 PM in Modifications
That has been extensively discussed (maybe too extensively). The general consensus was that it was not possible. You can use the search function to find the thread.so, as a follow up question, would it be possible/feasable to rifle a barrel? That would give a lot more accuracy than a less snug barrel that the dart smacks around on would.
#108081 Nesting
Posted by CD-R on 28 May 2007 - 11:08 PM in Modifications
#108636 Replacement Springs
Posted by CD-R on 31 May 2007 - 08:34 PM in Modifications
- NerfHaven
- → CD-R's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·