It is an Ertl outdoor sportsman pump shotgun. It used to be Black and brown, originally shot a single ball, and was introduced by FA_24 who got Around 140' flat.Hey bags, did you buy that thing off ebay? I like to think I am observant so I believe it used to be black/brown, shoot suction darts with a six barrel turret? Tell me if I'm right and please tell me some details on how it is.
Quilan Fett's Content
There have been 640 items by Quilan Fett (Search limited from 08-December 96)
#121018 Modification and Paintjob Pictures
Posted by
on 24 August 2007 - 06:00 PM
in
Modifications
#125421 Modification and Paintjob Pictures
Posted by
on 08 October 2007 - 08:24 AM
in
Modifications
Breech Loading Ball shooting titan
#144754 Modification and Paintjob Pictures
Posted by
on 11 March 2008 - 06:36 PM
in
Modifications
Dude, not cool.
#135179 Modification and Paintjob Pictures
Posted by
on 06 January 2008 - 07:56 PM
in
Modifications
This is my LS 3K integration. The LS has a manual loading breech with 1/2" Brass in PETG. My AT3K was already broken, so I cut the internals down to just the airtank and the turret. The turret works, but it doesn't auto-rotate anymore.
Inside
Inside
#135206 Modification and Paintjob Pictures
Posted by
on 06 January 2008 - 10:01 PM
in
Modifications
Thanks. I still have to attach the barrel to the bolt sled so I can't try it out yet, but I plan to by midweek.
#111039 Modification and Paintjob Pictures
Posted by
on 13 June 2007 - 09:19 AM
in
Modifications
My pump shotgun. I bought the turreted one, only to discover the turret's inherent crappiness. Here it is singled with a longshot spring added. It gets approximately 90-100 ft flat. I am thinking of reinforcing it and adding a 3B spring also. It's barrel is 19/32 brass nested in PVC which acts as a coupler for PETG and 9/16 brass.
P.S. I know the barrel is crooked.
P.S. I know the barrel is crooked.
#146373 Modification and Paintjob Pictures
Posted by
on 22 March 2008 - 08:46 PM
in
Modifications
I smell suspension in the air.
My crappy pic:
My mav's handle. I sharpied it.
My crappy pic:
My mav's handle. I sharpied it.
#111599 Modification and Paintjob Pictures
Posted by
on 16 June 2007 - 12:37 PM
in
Modifications
It is a shotgun foregrip (first created by CS) used to cock the LS. It is covered in duct tape.
#111678 Modification and Paintjob Pictures
Posted by
on 17 June 2007 - 12:29 AM
in
Modifications
So you basically integrated the sidearm but forgot to hook up the trigger?
#132340 Homemades Picture Thread
Posted by
on 13 December 2007 - 07:14 PM
in
Homemades
Says who?the nerf vortex pocket rocket, they are not allowed to be modified in anyway.
#137391 Homemades Picture Thread
Posted by
on 26 January 2008 - 08:12 PM
in
Homemades
#126331 Homemades Picture Thread
Posted by
on 15 October 2007 - 08:04 PM
in
Homemades
What kind of trigger does it use?My first homemade, extremely simple, but a beast.
#212876 Homemades Picture Thread
Posted by
on 16 February 2009 - 07:47 PM
in
Homemades
Link in Sig.
#136841 Lancer
Posted by
on 22 January 2008 - 09:27 AM
in
Modifications
If you posted on each of those sites that you were sellin' on e-bay, you could probably get a good $500 at least.
#112506 Modifying A Longshot?
Posted by
on 22 June 2007 - 11:10 AM
in
Modifications
Does a replacement breech need a guide to hold the dart like FA24's or will it work just as well without the piece to guide the dart?
#107109 Longshot Mod
Posted by
on 22 May 2007 - 05:45 PM
in
Modifications
No offense, but those are pretty easy mods, except for maybe the maverick.Well I have modded a NF, BBB, Max shot, and mav. Thanks alot sorry for the dumb question
#143334 Longshot Modification.
Posted by
on 01 March 2008 - 03:29 PM
in
Modifications
It depends. Different PETG have different fits. My PETG fits in 19/32 brass and over 1/2 brass perfectly.Would these modifications work with PETG?
Sure, You would just have to custom order all the petg. Each piece of petg must slide smoothly in each other and the seal must be perfect. It would be very costly and expensive though.
#142032 The Vulcan
Posted by
on 22 February 2008 - 07:47 PM
in
General Nerf
So true.One of the most destructive things to have on a public forum is PRIDE. When someone's ego gets in the way of good forum discussion, administrative action is needed.
Thats funny, because of a bunch of the mods/admins here have this problem.
*prepares to be banned for this post*
(winces for the blow)
#142048 The Vulcan
Posted by
on 22 February 2008 - 08:57 PM
in
General Nerf
Dude, I hadn't noticed that! Now I understand why it is looked just a repainted magstrike. I thought it might be NERF's version of Arachniphobia II.i didnt see anyone else post this but i think the iron man magstrike has a new mold... i mean in the pictures i have seen it has "iron man" on the side instead of "magstrike"... im just saying...
All in fun.
#141778 The Vulcan
Posted by
on 21 February 2008 - 06:19 PM
in
General Nerf
I don't know about the firefly, but the mav has an inverted plunger and the DTB has a real plunger. Not the same at all.Take a look at those guns (Mav, Firefly, DTG); they all share the same plunger. It could be argued that the LS and the Recon are high ROF guns, but the Vulcan doesn't use Streamlines. Since Hasbro tends to reuse its internals, it seems to follow that this high ROF springer would use the same guts.
#141345 The Vulcan
Posted by
on 19 February 2008 - 06:49 PM
in
General Nerf
#140073 The Vulcan
Posted by
on 13 February 2008 - 09:17 PM
in
General Nerf
[Ep.V Luke Skywalker] NOOOOOOOOOOOOOO! [/Ep.V Luke Skywalker]...batteries...
[Ep.III Darth Vader] NOOOOOOOOOOOOOO! [/Ep.III Darth Vader]
#150804 The Vulcan
Posted by
on 13 April 2008 - 12:56 AM
in
General Nerf
No, it says you can switch between full auto and normal.
#151391 The Vulcan
Posted by
on 16 April 2008 - 01:22 AM
in
General Nerf
Whoa, go to the site mentioned and watch the "test" video. I'm not quite sure what the point of that was.
#159561 The Vulcan
Posted by
on 17 June 2008 - 10:23 PM
in
General Nerf
The piston-powered internal launching system
It's not fly-wheel!
#165276 The Vulcan: Internals And Mods! New Mods Pg.9!
Posted by
on 29 July 2008 - 09:26 PM
in
Modifications
No discount for nerfhaven. It was for another store.
#164831 The Vulcan: Internals And Mods! New Mods Pg.9!
Posted by
on 27 July 2008 - 07:52 PM
in
Modifications
1 min = 60 sec. 600 / 60= 10.Why is everyone so exited about 1-3 rounds per second ROF? My stock magstrike can make 11 per second easy.
How do u get 11 per sec it only holds 10????
The navy's version of the Thompson SMG shot 600rpm, which would be 60 rounds per second. Did it have a 60rd magazine? No. If you fire 10 shots in 0.9 seconds, that would be about 11 rounds per second. By the way, you should also read the CoC, since you obviously didn't do it like you were supposed to when you signed up.
#119597 Longshot "shotgun" Foregrip
Posted by
on 14 August 2007 - 12:38 PM
in
Modifications
No. It doesn't fit right.could you take the pump thingy from the sidearm and use that instead?
#149221 Where To Buy Modding Materials
Posted by
on 04 April 2008 - 12:18 AM
in
Modifications
I have had very varrying experiences with ACE foam. I am now out and need a new roll of 1/2" foam to fit in 17/32" brass. I checked my local ACE and their foam was more suitable for CPVC. Does Home Depot have good foam? If not, who does?
#132728 Where To Buy Modding Materials
Posted by
on 16 December 2007 - 09:33 PM
in
Modifications
Ace.
#128466 Where To Buy Modding Materials
Posted by
on 03 November 2007 - 06:04 PM
in
Modifications
I also hear PVC's bad, but I'm not too worried.Damn, your from california. You guys think everything causes cancer.
Uh, I'm from Maine, we all HAVE cancer up here, and we live with it. And it didn't say lead, it said "Contains chemicals known to the state of California to cause cancer and birth defects".
Nerfturtle, try asking if you could just buy half the piece or even 3 feet or something..
EDIT; I advice not buying from ace, i just bought a pipe cutter and the blade is on crooked.
#142894 Where To Buy Modding Materials
Posted by
on 27 February 2008 - 06:06 PM
in
Modifications
Yeah, my Frost King 1/2" FBR is grey and fits easially in 1/2" CPVC.
#128364 New Nerf Blaster From Hasbro
Posted by
on 02 November 2007 - 06:36 PM
in
News
From AmazonHe didn't say Dec. 15th. He said mid-December. That doesn't mean it's the exact middle...
Availability: This item will be released on December 15, 2007. Pre-order now! Ships from and sold by Amazon.com. Gift-wrap available.
#127218 New Nerf Blaster From Hasbro
Posted by
on 24 October 2007 - 08:36 PM
in
News
It could have the same breech as a LS as seen in the LS carbine.From the pictures provied by OMC it looks like the loading system may be different from the Longshot, as there's no substantial barrel in which to insert the dart, which makes me wonder if the dart will be pulled backwards instead, or if a sleeve will leave the dart in place, but close the barrel around it. It looks like it's roughly the size of a longshot, so we can probably expect similar ranges, depending on the breech.
#127195 New Nerf Blaster From Hasbro
Posted by
on 24 October 2007 - 07:43 PM
in
News
THAT IS AWESOME!!!
How big is it?
How big is it?
#129824 New Nerf Blaster From Hasbro
Posted by
on 15 November 2007 - 10:02 PM
in
News
Also
Airtech 2K
Airtech 3K
Atom blaster?
Airtech 2K
Airtech 3K
Atom blaster?
#131975 New Nerf Blaster From Hasbro
Posted by
on 10 December 2007 - 08:49 PM
in
News
Wisey!, your pic is off. Look at the back of the handle and the front inside of the rail.
#131098 New Nerf Blaster From Hasbro
Posted by
on 01 December 2007 - 11:39 AM
in
News
Actually, from that picture, it looks like it could be nearly as big (the plunger) but the rod just goes out the back.
#129881 New Nerf Blaster From Hasbro
Posted by
on 16 November 2007 - 09:41 AM
in
News
Kohls.com
#129257 New Nerf Blaster From Hasbro
Posted by
on 09 November 2007 - 07:44 PM
in
News
I would request an
EAB
SM1.5K
SM750
EAB
SM1.5K
SM750
