I just walked down stairs to find my titan missile, and 1 from an XXL bazooka chewed up by my dog. I was wondering If anyone had a suggestion to make new ones. I've heard of pool noodles and pipe-insulation, but not for the XXL. Help?
EDIT- I'm mainly interested in the XXL missiles, because that gun is just so fun to use.
umpshaplapa's Content
There have been 435 items by umpshaplapa (Search limited from 03-December 96)
#203747 Missile Help
Posted by
on 16 January 2009 - 12:11 AM
in
Modifications
#204802 Angel Breech Question
Posted by
on 19 January 2009 - 06:35 PM
in
Modifications
I cut down the bolt to the same size as in the picture, but none of my brass pieces can fit all the way through. Do I have to sand down the inside of the bolt piece?
#204812 Angel Breech Question
Posted by
on 19 January 2009 - 06:47 PM
in
Modifications
Cool, thanks.
#201382 Any Y'all Out There?
Posted by
on 05 January 2009 - 10:46 PM
in
General Nerf
Hey If you're not from Atlanta just ignore this, I was just trying to find some more nerfers in my area. So far I know of 1 other.
If for some reason these types of threads are extremely erotic tell me.
If for some reason these types of threads are extremely erotic tell me.
#201433 Any Y'all Out There?
Posted by
on 06 January 2009 - 08:08 AM
in
General Nerf
Ok, I'll search that, thanks.
#247930 Quick Check Valve Help
Posted by
on 20 August 2009 - 11:05 PM
in
General Nerf
7757K41
#206394 Pa War 3
Posted by
on 25 January 2009 - 07:21 PM
in
Nerf Wars
Is it just me or is there no text?
#214752 Angel Breech Help
Posted by
on 24 February 2009 - 07:50 PM
in
Modifications
At first I had forgotten the O-ring, but then I saw it was missing. I'll go mess with it some more and see if I can find the problem.
#214614 Angel Breech Help
Posted by
on 24 February 2009 - 01:19 AM
in
Modifications
When I blow down the breech I hear air leacking at the plunger tube area where the brass comes out. In angels writeup he says:;
I looked through the rest of the post and couldn't find anything that looked like a fix. Help would be appreciated.If you here air leaking near the plunger then that is not an issue because we will deal with that later.
#199763 Sm750 Problems
Posted by
on 30 December 2008 - 12:16 PM
in
Modifications
I think his tank would explode before the valve died.Fuck man 44 times? I hope that is a typo. I told you to pump the thing 4 times. Yeah, 44 times would shoot the check valve to hell. That's likely your problem. I know you can buy check valves from McMaster.
The same thing happened to me with an AT2k pump. The pump would shoot back out if you tried to pump it. But ya, it's the check valve in your pump.
#242289 I Will Take Contracts [ Selected Mods ]
Posted by
on 16 July 2009 - 05:16 PM
in
General Nerf
Is there any examples of your previous work?
#217030 Wtb: Dtb Turret
Posted by
on 08 March 2009 - 10:32 PM
in
Homemades
If you PMed an admin I bet they would delete it for you.
#201390 At2k Luck?
Posted by
on 05 January 2009 - 11:13 PM
in
Modifications
I know. Actually I think this could be quite lucky on my part. It makes me worry about the dump valve though.That's good though, less dead space.
#201394 At2k Luck?
Posted by
on 05 January 2009 - 11:33 PM
in
Modifications
I must be unlucky. HahaThat's normal. All mine did the same.
#201388 At2k Luck?
Posted by
on 05 January 2009 - 11:06 PM
in
Modifications
I was ripping of the the pole part that comes out of the 2k tank, to get a better flow and all that. If im not mistaken it allways brakes off at the end of the bulge that comes out of the 2k tank, but this is what happened to mine.
I was wondering if this has ever happened to anyone else?
I'm sorry about the blurry pics, I can't find my camera and I have to use my iphone camera, which isn't good up-close.
I was wondering if this has ever happened to anyone else?
I'm sorry about the blurry pics, I can't find my camera and I have to use my iphone camera, which isn't good up-close.
#219706 Glue Question
Posted by
on 24 March 2009 - 09:34 PM
in
General Nerf
Use plumbers goop. Work's better than anything I've tried.
#204788 Question
Posted by
on 19 January 2009 - 06:05 PM
in
Modifications
If you cut it off, just slap some goop in there and it will be fine.
#216956 Alabama War
Posted by
on 08 March 2009 - 04:25 PM
in
Nerf Wars
There is a slight chance that I would go to a 'bama war. I live in Atlanta so it isn't a short ride over to ya.
#225711 Possible Nerf War
Posted by
on 25 April 2009 - 10:44 AM
in
Nerf Wars
Where?
#203327 Singled Ls Help.
Posted by
on 14 January 2009 - 04:45 PM
in
Modifications
Are you saying when you switched the internals the bad set got better?
#203373 Singled Ls Help.
Posted by
on 14 January 2009 - 06:58 PM
in
Modifications
Are you sure you sealed the gap between the PVC and CPVC well?
#249422 Search Is A Pain
Posted by
on 02 September 2009 - 04:18 PM
in
Off Topic
Type "(what you want to search) site:nerfhaven.com" into google.
#206399 Big Salvo Problems
Posted by
on 25 January 2009 - 07:27 PM
in
Modifications
Without a plugged pump? It seems a little unlikely to me, but who knows? Maybe you have an exceptionally powerful one.I'll try it. Thanks, I'm pretty sure you're talking about Q-tips right? Haha. I don't know much about Big Salvo's But I didn't even open it up, I just stuck 10" CPVC barrels down each existing barrel with some e-tape on each and I'm getting about 110'-120' ranges level. Is it supposed to be that awesome?
#218028 Mcmaster Question
Posted by
on 15 March 2009 - 10:02 AM
in
General Nerf
This page says that McMaster sells their brass. I guess I'll just order it and find out.
#217984 Mcmaster Question
Posted by
on 14 March 2009 - 11:04 PM
in
General Nerf
This is the same 9/16" brass that you buy at Ace, correct?
http://www.mcmaster....8859k35/=1098ca
http://www.mcmaster....8859k35/=1098ca
#219424 Big Salvo Tank Question
Posted by
on 23 March 2009 - 03:09 PM
in
Modifications
If I connected the tubing from two big salvo tanks with a tee, and then connected that tee to an SMDTG trigger, would the tanks lose any pressure/range? I'm not sure how the air goes into the tank(s) through the SMDTG trigger, so I was seeing if anybody could help.
#222663 Lock And Load Keyring Replacement
Posted by
on 09 April 2009 - 04:31 PM
in
Modifications
It really hasn't snapped? It seems like it wouldn't stand up to repeated use. Maybe you could use some wire, and rap that in E-tape?
#204184 Clothspin Trigger
Posted by
on 17 January 2009 - 05:13 PM
in
Homemades
What is this injection tab you speak of? I can only get curved end caps that have nothing raised on the outside at all.
#204156 Clothspin Trigger
Posted by
on 17 January 2009 - 03:42 PM
in
Homemades
I'm making a SnapBow, and I can't seem to cut the nail the right length on my trigger. Does anybody have a picture of how much it should stick into the tube? or a Length would be even better.
#226744 Stefan Dart Tutorial Video
Posted by
on 27 April 2009 - 10:23 PM
in
General Nerf
My only complaint is not straightening your foam before you make the dart. I would use a ruler also, make your darts as consistent as possible.
#212340 Deoderant Clip
Posted by
on 14 February 2009 - 11:23 PM
in
Modifications
I made a deodorant clip for a breach I made, and I'm having trouble loading it. If I try to load a dart it, the weighted side goes straight down. The darts are barely shorter than the card board I have inserted in the clip.
Am I doing something wrong?
Am I doing something wrong?
#212345 Deoderant Clip
Posted by
on 14 February 2009 - 11:49 PM
in
Modifications
Is there any way I can not have that happen?
#200701 Doomsayer Question
Posted by
on 02 January 2009 - 10:24 PM
in
Modifications
Does that work better than boiling water? I've been trying that method with bad results.Get a hair dryer and set it to high put the peice under it for like 5-10 min. then try.
#200660 Doomsayer Question
Posted by
on 02 January 2009 - 07:20 PM
in
Modifications
So I've opened up my doomsayer-to-be (hopefully) and I can't get the rubber plunger head back on. Getting it off was pretty easy but back on is impossible!
I was just seeing if you guys had any tips to help.
edit- 1 more question. Do you guys think that brass would be to heavy to use as barrelling (sp?) material? I saw that a guy did it with PVC but I was worried about how long that would last.
I was just seeing if you guys had any tips to help.
edit- 1 more question. Do you guys think that brass would be to heavy to use as barrelling (sp?) material? I saw that a guy did it with PVC but I was worried about how long that would last.
#200692 Doomsayer Question
Posted by
on 02 January 2009 - 09:46 PM
in
Modifications
Good point, hadn't thought of that.Dude, if you use brass it will cost a lot more than it should, then you would must likely want to nest it for protection from the tarnish monsters. So you would then have 24' of tubing on the end of your weapon.
#222181 Sm1500 Help
Posted by
on 07 April 2009 - 03:27 PM
in
Modifications
I can't. My mom took my camera to florida and my iPhone can't get good resolution and super close. Are you familiar with how a 2k turret seals? It's the exact same way.Pictures would really help.
#222176 Sm1500 Help
Posted by
on 07 April 2009 - 03:06 PM
in
Modifications
I recently got a SM1500, and was looking forward to modding it. The previous modder has just taped on some PVC barrels, and then put about 15 layers of duct tape on that. After digging through all that shit I looked at the turret. I realized that the barrels weren't sealing with the back part of the turret that connects to the tank. Has this happened to anybody before? I searched and couldn't find anything.
Also, it's a new style 1500. I don't know if that helps or not.
Also, it's a new style 1500. I don't know if that helps or not.
#222198 Sm1500 Help
Posted by
on 07 April 2009 - 04:14 PM
in
Modifications
I'm sorry if I didn't make this clear. I'm not talking about the tank to turret seal. I'm talking about the seal between the back part of the turret and the front part that rotates.
#222216 Sm1500 Help
Posted by
on 07 April 2009 - 04:44 PM
in
Modifications
Yes, exactly. I rotate and there's still the gap. I'll go look and your idea of the bar...So after you rotate it there is still a gap between the front and back parts?I'm talking about the seal between the back part of the turret and the front part that rotates.
From what I know about an AT2K turret, it sounds like the front part partially slid off the metal bar that goes through it....(I'm assuming that that it's exactly the same in the SM1500.)
#200720 Doomsayer Question
Posted by
on 02 January 2009 - 11:03 PM
in
Modifications
Do you mean like cut straight through it and then glue it together?Whatever you do, do not cut the plunger head to fit back on, I did that and now it won't stay on...
