RedShot's Content

#307072 Nerf hornet question

Posted by RedShot on 07 November 2011 - 07:36 AM in General Nerf

Have you opened it up at all? The tubing leading to that tank may be pinched.

#293697 Post New York Wars Here Plz

Posted by RedShot on 01 February 2011 - 05:37 PM in Nerf Wars

People of nerfhaven, please post your New York nerf wars here. I have been looking for a NY war for a long time. post them here, say Date(including time), rules, wht we should bring and where in NY.

There is a very nice, organized thread dedicated to show the people of nerfhaven when and where nerf wars so you can refer to it here Click here!

Your welcome :] Next time you can find a thread with minimal effort.

#296931 Rscb Barrel Length Question

Posted by RedShot on 30 March 2011 - 09:12 PM in Darts and Barrels

Well what tank are you using them for?

I currenly have a 4b with an rscb. It has 1 foot of 5/8ths brass in a 1/2'' CPVC - T with an endcap on it and then 1 foot of CPVC and it works like a dream!

#254229 Lanard Sawed-off Shotgun.

Posted by RedShot on 21 October 2009 - 04:24 PM in General Nerf

Ok if I am not mistaken he is talking about the lanard shotgun that NerfPancakes is talking about it the one I already said is a good deal. I am talking about the one that is a sawed off version. Sorry for the confusion.

#254260 Lanard Sawed-off Shotgun.

Posted by RedShot on 21 October 2009 - 08:02 PM in General Nerf

Oh ok so It obviously has good modding potential than? Would it be good to slap a coupler on there and beef up the spring or something, Or is it not worth it?

#284402 Help With Nerf Raider

Posted by RedShot on 31 August 2010 - 06:08 AM in General Nerf

You could go to your hardware store and look for some heavy duty wire and bend it at the places you need it with pliars and a vice. Could also do the same with a think metal hanger.

#303542 Where do i find barrel spacers?

Posted by RedShot on 19 August 2011 - 07:23 AM in General Nerf

Yes! I highly recommend venom's spacers if you are looking for good quality spacers!

#237279 Can Sombody Build A Gun For Me?

Posted by RedShot on 18 June 2009 - 09:20 PM in Modifications

I guess this would be considered a modification, I don't know what else it would be. Anyway I was wondering if

somebody could make a angle breached longshot with a couplered titan Integration. If possible I would like

black red and grey paint job. Lastly the actual rocket barrel on the titan to have about 3 barrels in it for shotgun

effect. That's pretty much it. I'm sure somebody could make it

. About how much would it cost also.

#254177 Lanard Sawed-off Shotgun.

Posted by RedShot on 21 October 2009 - 05:38 AM in General Nerf

HI guys I have a question for you. I was wondering if any of you guys have and tested the Lanard Sawed Off Shot Gun with 6 Darts because I already know that the other shotgun with 12 darts is good for modding but I was wondering about the sawed off one. If you could than just tell me if it has a good modding potential and if it has like a good spring in it for good airflow.

Thanks in advance.

#313718 Painting problems

Posted by RedShot on 29 March 2012 - 10:01 PM in General Nerf

Yes I have had the same effect, and the same result. I used a matte finish so it completed dulled the chrome and from what I was told a clear coat in general will either dull or eliminate the chrome effect unfortunately, but try a high gloss and let us know what happens

#286150 Whipeout Or Pistolsplat? (or Other?)

Posted by RedShot on 27 September 2010 - 05:04 PM in General Nerf

It's the skinniest main spring I have seen. If you want to do a spring replacement you will have to buy the gun anyways, so you will have the spring when you decide to try to replace it for reference.

Ok thank you for your information!

#302409 GET TO THE CHOPPA!!!!

Posted by RedShot on 27 July 2011 - 07:40 PM in Nerf Wars

So just one thing that I need to understand is that what is holding the attacking team from just staying in or near the safe zone or pick up zone and making sure the chopper cant get there or the people cant load into the chopper?

Cool sounding game though! This could work for us because I have about 30some big blast missiles and tons of other missiles haha!

#286146 Whipeout Or Pistolsplat? (or Other?)

Posted by RedShot on 27 September 2010 - 04:45 PM in General Nerf

Oh ok thanks for your imput. Do you know the size of the spring (diameter) like nightfinder, or maverick, because if I wanted to do a spring replacement.

#286143 Whipeout Or Pistolsplat? (or Other?)

Posted by RedShot on 27 September 2010 - 04:35 PM in General Nerf

I have seen the potential of the small pistolsplat at my war last weekend and I was wondering how does that compare to the whipeoutblaster and I hear that there are different sizes? I was just wondering what is 'better', or smaller, or easier to work with, or even if there is another brand that I am unaware of than let me know.

Also I saw this at target yesterday and I was wondering if anybody has seen or used these. It is very big and looks nice. It is about the length of a maverick or possible a little longer.

Thanks in advance!

#301441 TEPAW 3: Recap thread/improvements!

Posted by RedShot on 12 July 2011 - 09:44 PM in Nerf Wars

Ok so there is the poll, I would like to hear your opinions on these things. I would like only those who came to TEPAW 3 to vote please but other that came to previous wars may post suggestions.

I really would like to get some input for the war so that I can improve the wars and make an over all better experience for the war goers. Even if you voted please post at least one thing you liked and one thing that can be improved for upcoming wars!

Thanks for your input!

#300141 Pennsylvania Foam Frenzy 2

Posted by RedShot on 19 June 2011 - 09:50 AM in Nerf Wars

I would really really like to come to this war. I just have to make sure it fits in with my Dads schedule. So put me down as a maybe, but I think there might be a good chance that I make this!

#246988 Rf20 Help

Posted by RedShot on 14 August 2009 - 05:27 AM in Modifications

Can you make a video showing whats the problem and what it looks like?

How many pumps did you try?

#290619 Magstrike Holdster Thing

Posted by RedShot on 11 December 2010 - 08:25 AM in Modifications

Nice and easy strap addition! I completely agree with ImportedUniversal the magstrike is underrated! I love magstrikes and use them in every war!

#247458 Q's About Flip Clip Ls Clip?

Posted by RedShot on 18 August 2009 - 05:39 AM in Modifications

Yeah I got one for $15 and I would still say it is worth it for the connector, 30 streamlines and 2 clips. Even though I would have liked to just buy the friggen clip piece itself I guess its fine.

#300444 The's Central Jersey Conflict C.J.C.

Posted by RedShot on 24 June 2011 - 05:26 AM in Nerf Wars

I would like to make it but, I think there is a good chance I wont be able to make it.

#269758 At3k Tank Replacement

Posted by RedShot on 20 March 2010 - 05:12 PM in General Nerf

Yeah replacing the tank will not do what you are looking for. If you hook up a bladder system then with a release it will fill the tank each time so you dont have to pump after each shot. You will have to pump more to fill up the bladder though (unless you are using compressed air) but you will have more than one shot.

#319114 Stefan Questions

Posted by RedShot on 24 July 2012 - 04:49 PM in General Nerf

If I am not mistaken I do believe you mean 1/2" cpvc not 1/4". Typically in 1/2" cpvc, 1/2" foam backer rod will do the trick. If you truly mean 1/4" then please disregard.

As for the method of making the darts, there are multitudes of variants that should not be too difficult to find or produce.

#249491 Fire Fly In Humanty's End

Posted by RedShot on 03 September 2009 - 02:36 PM in Off Topic

Link isnt working for me.

I really want to see it though!

#316812 Foam & plunger tubes

Posted by RedShot on 10 June 2012 - 08:36 AM in Modifications

I wipe off the stock lubricant and then give it a nice soapy wash and I use either gorilla super glue or loctite super glue on the craft foam.

#269427 Today Only (march 17) Buy One Nerf Get 2nd Half Off

Posted by RedShot on 17 March 2010 - 05:36 AM in General Nerf

Thanks a lot! I will definitely be going to toysrus today!

#240790 I Need Help With My Vulcan.

Posted by RedShot on 08 July 2009 - 11:22 AM in General Nerf

I bought a Vulcan from a friend and it shot ok for one time (jammed a little) but then when I tried it again it just didn't work at all! I think the problem is the rotary part that advances the chain/belt is broken or it is stuck, because it will not pull the chain through. I think I have heard others have this problem but I wanted to know if that is all it is and or how to fix it. I did not want to buy it and have that money go to waste. I could sell it if I can't figure something else so somebody else could fix it.

Thank you, RedShot.

#240970 I Need Help With My Vulcan.

Posted by RedShot on 09 July 2009 - 07:26 AM in General Nerf

Vulcan's = fail. Get a BBB and do wonders with it. Ironically the arrows are red.. That fit with your name

Yeah I realize that now I hate my vulcan and want to sell it really bad! I have the BBB on my wish list this will probably be my next gun. I heard that it is easy to mod also. I want to get a NIB red one 'hence the name'.

#240893 I Need Help With My Vulcan.

Posted by RedShot on 08 July 2009 - 08:47 PM in General Nerf

Ok but do you know how to fix the actual rotary thing? All you told me is that it happens to a lot of people. Sorry but that does not really help.

#246987 Pre-order N-strike Raider Rapid Fire Cs-35

Posted by RedShot on 14 August 2009 - 05:23 AM in General Nerf

Availability: Usually ships within 60 days
Wow two months!

I went to my local target and they didnt have any

Kmart had the price tag for them in the nerf isle but they were all sold out.

#302793 Collecting info for new Dart thread.

Posted by RedShot on 04 August 2011 - 08:13 AM in Darts and Barrels

1. I buy hot rod xl foam, and I have a couple hundred blanks of bigbens old stuff (love it!). I also have a couple hundred blanks of foam from ace, and home depot (those are not my preferred quality but I have to foam just in-case I need it, I also use it to put into guns). I really wish I could get more of the bigben foam because I hear his newer stuff is larger and almost similar to the hot rod xl in diameter.

2. Sadly I do not have a good supplier for either of those two, I got to my local hardware store on an as needed basis for hotglue and it is pretty cheap. I use a large high temp hotgluegun, but I may get a large high/low temp hot glue gun because you can switch between to two settings and it looks like a nice hot glue gun :] I have been trying so hard to find a good supplier of color/glitter hot glue for more distinct darts but I havent found anything solid. The one website that I was the closest to was rainbow of colors in 5lb and 25lb packs. That is ALOT of hot glue!

3. Let me give you a little background on my wars. We are in the south central PA area and my war series for this summer is called TEPAW so you may have heard of that series. Being the host, I alow any kind of dart, stock, modified stock darts, dome stefans, and slugs. Dome stefans are by far the most popular because I do not limit the weight you can put into it, you can get good aerodynamics as well as a nice weight so a far traveling bb. I dont feel that 1/4' slingshot weights are really that sluggish in the air but whatever haha. I am going to try out 3/0 fishing weights sometime and compair the two. For gun bans, well that is for a different topic.

4. I believe if you are making slugs, the dartsmithing thread is helpful but I do not prefer slugs at all but I will make them when needed.

All in all I highly prefer to make dome darts, easier to make in my opinion, and yet go farther! Plus I do not have to order my supplies online from McMaster. I also feel that slugs may have a quicker time until they come apart. I feel that the hotglue may have a greater tendency to come off sooner. I wish we could use dome darts at apoc :] oh well.

Any more questions, feel free to ask.
Thank you for your time!

#265050 Needs Advice For A Crazy Plan.

Posted by RedShot on 11 February 2010 - 10:43 AM in Modifications

Well I would say go with the big blast if that is all you have to work with because that can deal a lot of air power. The trigger system might be a bit of a challenge to work with but if you place it right I think it would look awesome!

#245534 Would Anybody Be Interested In A Nib Recon?

Posted by RedShot on 04 August 2009 - 09:53 PM in General Nerf

Oh ok than I will not post on this anymore.

Would and admin please close this thread it is useless.

#245532 Would Anybody Be Interested In A Nib Recon?

Posted by RedShot on 04 August 2009 - 09:35 PM in General Nerf

Sad to say it is not ^_^

. I really wish though!

#245504 Would Anybody Be Interested In A Nib Recon?

Posted by RedShot on 04 August 2009 - 06:28 PM in General Nerf

I was wondering if somebody would want a NIB recon. I have one that I could sell for like $15 + Shipping. If anybody is interested than send me a pm and an offer.

The reason I have not posted this as an official WTS is because I have to learn about shipping and what ways to calculate shipping to places and what shipping to use.

Also I am posting this to see if anybody is really interested in it or not because I could make use of it if nobody wants it.

Thanks!
RedShot

UPDATED!

#245549 Would Anybody Be Interested In A Nib Recon?

Posted by RedShot on 04 August 2009 - 11:42 PM in General Nerf

Nah I think I will just keep it now and mod it up best I can and maby put a paint job on it!

#245578 Would Anybody Be Interested In A Nib Recon?

Posted by RedShot on 05 August 2009 - 08:09 AM in General Nerf

Well my dad is getting me a raider anyway so it is no use.

My dad also bought this for me so it is like free for me.

Also my kmart had a huge sale on the recon so its cool you know?

#261707 Maverick Gunblade

Posted by RedShot on 13 January 2010 - 06:29 PM in Modifications

Oh ok that is good you still have a functioning maverick.

I actually meant in here, because it it more of a showoff but still cool!

Welcome to the NerfHaven.

#261698 Maverick Gunblade

Posted by RedShot on 13 January 2010 - 05:58 PM in Modifications

Thats cool man but here is a great Gunblade: Video : NerfHaven link.

If I am not mistaken should this not go into the modifications thread?

Is the maverick turret still functional because from what it looks like to me you blocked it by the cpvc.

#247970 Rf20 Problem

Posted by RedShot on 21 August 2009 - 12:02 PM in General Nerf

Yeah same thing happened to me! I got it thinking that it could shoot one at a time easily anyway but it shoots a burst. As he said all it does is slow the ROF no real single shot but makes it easier to 'single shot' it. It didnt really matter to me though.

#299451 PA Mod Session!

Posted by RedShot on 06 June 2011 - 09:34 PM in General Nerf

I will be first to put myself on the list. Last test is the 17th so it works perfectly. Just will need my mom to give a ride hopefully.
Question. Should I bring my own epoxy putty and other if needed? I know you have adhesive and stuff. Also cvpc and pvc I will bring for anything I need and will share of course but do you have a pipe cutter or hacksaw or should I bring one?

Yeah I would suguest bringing all of your modding supplies that you can. I have epoxy putty but I know that it will run out fast if everybody is going to use it so bring some so that I will not run out haha. I have pipe cutters and a hacksaw so I am ok on that. Its good that you are bringing cpvc and pvc, it will be put to good use :]

I can make it. If I'm building a plusbow should I bring a scroll saw?

EDIT: Combos for everyone!

If you can bring it, that would be great!

Yay combos!!!!

RedShot's Content

By content type

See this member's

Sign In