- → Mas Ketchup's Content
Mas Ketchup's Content
There have been 39 items by Mas Ketchup (Search limited from 05-September 94)
Oh... Thats what that it. Thanks man i owe you a big one
I deleted the first set of pictures but, I guess this is a more common problem than I thought. You want the ratchet facing back towards your hand with the curve pointing up. The tortion spring should make a backwards "C" and the short end should fit into the notch in the ratchet.
I had the same problem a while ago. Check the reply about the tortion spring that is what is wrong.
Thanks for trying to help but after reading through everything i already tryed all of those
Oh ya sorry about the blurry pictures.
This is what your gun should look like out of the package:
Take the barrel out.
Then take your dremel or drill and clear out the barrel.
Then take the black peice and drill a hole on one of the sides of the plus looking thingy.
Then take you string and knot it in there.(sorry dont have picture Aaidentally deleted it)
Take your dremel again and dremel a small hole in the back of the gun.
Thread your string through the spring the hole and tie on the keyring. It should look something like this:
Be sure when you fire the gun hold the keyring in you thumb like so:
If you don't the keyring will act as a weight and will decrease the range
This gun is not for and outdoor war but is great for a small indoor war with your friends or family.
The ranges are about 40ft-50ft.
Ya the name is not that great and if you have a better one please comment
intergration. I chose for the trigger to be a key ring, but the only problem is
that i dont know how to do the wireing. So if anyone has any picture on how
to do the pictures please show them. Thank you and Happy New Years
Well actually I have never used PETG. So im not sure which fits better.
What about CPVC? Explain to me in detail how your darts fit in it. (ie can you blow a dart through, if you hold the barrel upright will it fall out, do you have to twist the dart in, etc)
Acutally when I use stefans I normally dont have to twist them in. Only because i dremel the end of the CPVC first.
Also I can't seem to find 17/32 brass at my local Home Depot. Do they sell it at Lowe's?
cousin gave to me and i was wondering if any one could post a mod for it.
The only thing ive done to it is that it cut off the end and shoved a peice
of 1/2 CPVC in there. and it gets about 60 feet if not more. (estimation nerver exactly measured)
So if anyone could think of a mod that would be cool. Thanks
Where is the write up?
I already have the triggered BnA writeup done, just need to tweak the gun itself. Should be up on or around Tuesday. It was pretty well established that this thread isn't necessary, just so you know. We don't take requests for mods 'round these parts.
The barrel is 12in. but if you want the stefan to come out you better make the barrel about 4in.
How long is that barrel? And why is there no lighting?
The reason there isnt lighting is because if there was there would be a glare on the shell and it would make even harder to see
I got the Nerf video game for christmas and since i have alot of cousins we have nerf wars. No one wanted to use the switch shot so i though im going to do a mod to it but not just any mod a coupler mod, just because I have alot of speed loaders.
oh ya sorry about the blurry pics. my dad is in Taiwan for buisness so i was stuck the the crappy dell laptop webcam.
Ok lets begin
Most of this mod is dremling so here are some pics of where you need to dremel.
In the plunger tube dremel part of the hole out for more air flow.
After dremling, cut off the end and glue the coupler on. I really just used gorilla glue and hot glue.
Pic of everything put in.
Pic down the barrel.
Pic of gun screwed together.
Know that the barrel should not be that long the stefan will not leave the barrel.
The real barrel length should be about 4in.
Im not sure right now but it is clearing my hall way easy which is 30ft.
Ill have actual ranges tomorow.
Anyways, I went to walmart and picked up the last BBB.
I have been waiting so long and I finally got it. I was searching the Modification list for a couple mod, but I couldn't find one. So I decided to make my own.
-3/4in to 1/2in cpvc coupler
-drill ( if you want to drill through the white piece )
Lets get started.
Here are some pics before i opened it.
1st open the gun up. ( duhh.... ) It should look something like this.
Find these two pieces. You do not need the one on the left.
But the right on the other hand you have to have. This is where the drill comes in. If you want to drill through you may, but i didn't. I was just too lazy to, but if I go to a nerf war I will drill through it.
Now take the head and cut till it looks something like this.
Finally take you 3/4 to 1/2 cpvc coupler and and glue it on like so.
Screw it back together and it should look something like this.
This mod is pretty easy and it gets great ranges.
Mine only has a stock spring and its hitting about 70 feet average.
Thanks in advance
I just wanted to know if any one in the NIC played Warcraft. If so leave your battle net name and games your play.
Mine user is:
The games I play are:
DotA (Defene of the Ancients)
Hero Line Wars Lintion (no that good in this game)
Costum Castle defence
Island Troll Tribes
Tower Line Wars
I also like tower defence games and regular games
If enough people participate ( is that how you spell that? ) the maybe every week or so we can have a big game of DotA or something.