One - Stop posting stupied smilies
Two - Dont post two times use edit
Three - Dont name things Whhhhhhhhhhhhh
Four - Put pics into the Post not links they never work Right.

Just trying to help.

I'm assuming that if you did add a spring that would still allow him to cock the gun, it wouldn't even add considerable ranges because of the spring would have to be quite weak.

Plus bow spring. Make that boy into a man.

I have an Ls spring in mine get 100 feet every shot. But really not to be an asshole or anything you should really check the Modifactions Directory.

Yeah I check before I post, well most of the time. BUT the point is what spring would a 10 year old be able to cock.

Just see if he can prime it and if he cant just take the extra spring out.

I honestly think you're the ten year old here. You're posting as you know soooo much about his strength and whenever an question pops up, you answer without doubt.

Springs that I have personally used with success in PAS include Big Bad Bow springs and Longshot springs. I have also heard that Whiptail Scorpian springs work too.

Yeah, BUT you are 13+ and my little cousin is 10.

If he won't be able to prime it easily with added springs, why would you bother adding them in the first place?

I have an Ls spring in mine get 100 feet every shot. But really not to be an asshole or anything you should really check the Modifactions Directory.

Springs that I have personally used with success in PAS include Big Bad Bow springs and Longshot springs. I have also heard that Whiptail Scorpian springs work too.

Hey 'Haven...
I just stumbled upon 50 dollars, wich is enough to purchase the vulcan, but I am wondering if it will really be worth it (as in modding capability, and stock performance).

Please respond, because I just dropped 20 bucks for the Auto Tommy 20 a month ago and it sucked. Hard.

You don't think I'll eat 12 cubic feet of snack cakes? I'LL TOTALLY EAT 12 CUBIC FEET OF SNACK CAKES ARRRGGGGGGGHHHHHHH

I'm glad someone said it.

I like when a group of people develop a joke. Then another group of people take it as their own and then beat it into the ground.

WAAAAAH!!!

Does anybody have ST9k stickers (Supertech 9000)? It would make my life a hell of a lot easier.

You could just use a pen spring. At my local ace, lowes, and home depot I haven't seen any springs small enough to function as catch springs.

Holy shit people....

get your cheap screwdriver, put some superglue on the tip and press firmly into the screw.... wait a few minutes and thread it out.... then put the tip of the screwdriver in boiling water to release the superglue.

Try calming down first.

If it is stripped, then just pull it apart with some of those muscles you have. If you have any...If that doesn't work, you really don't need the cocking handle anyway. Or is it on the gun? I don't know what the 'cocking bar' is but I'm sure a small tug and it'll come off.

Try banging it upside down too

Yea. How do you hold it? Sorry guys. This isn't the finished picture. Now, I have made the snap pistol with the handle and a speed loader. Not much, but still great. By the way, gorilla glue is freaking strong!!!!!

I thought you guys might like to know this. Here is an article my mom sent me about it at school today


HASBRO NERF BLASTER TOYS RECALLED
written by CBC News
The U.S. Consumer Product Safety Commission is recalling Nerf N-Strike Recon Blasters because a child's skin could get caught in moving parts of the toy's plunger.

MSDFS

Ya I am wondering if I should buy a recon but i want to see your mods on the recon.

Old topic.

Could you check the modification directory and find out what you want to know for yourself?
Could you? Because you probably don't want to get suspended.
http://nerfhaven.com...?showtopic=7150

If I cut the goo gage tube on my at2k will it still be able to hold air?

It's half inch CPVC but you'll need to dremel both chambers and use PVC if you half big stefans

Hey guys i was wondering how you would work do it?
Because the PVC isn't fitting INSIDE the chamber, sorry if i am being Sir.Noobalot

Fix up your grammar.
Tell us EXACTLY what your asking.
And try searching, because a PVC LS has been done before.

Hey guys i was wondering how you would work do it?
Because the PVC isn't fitting INSIDE the chamber, sorry if i am being Sir.Noobalot

The problem is your using PVC Ice used CPVC which slips nicely into the plunger tube and the dart chamber.

It really depends on what your ammo is.

If you're using stock tagger darts like most noobs, Sch. 40 PVC will fit around the velcro tip. You don't want a very long barrel though because it's such a poor setup. CPVC will work for stock taggers too, but won't cover the whole dart, it'll only go up to the tip.

If you're using CDTS or stefans, I wouldn't recommend either. CPVC works, but it's extremely tight.
Most people use:
-17/32" Brass tubing: spring guns with a quick discarge
- 9/16" Brass tubing: Air guns and springers with slower discharges
- PETG: All-around good barrel material.

You really only need PVC to nest your barrel material in and possibly to use with Mega stefans.

EDIT: ah, Mxer4life369

I've found cpvc at home depot but it's extremely tight to where the stock streamlines have to be twisted into it and they still barely fit in half way.