Hi Yah's Content

#234335 Noob Question But.....

Posted by Hi Yah on 04 June 2009 - 07:47 PM in General Nerf

The only difference would be the density and circumference. It all depends on your foam. You pretty much just have to pick one that fits your barrels good, and that is pretty firm.

#232036 Longshot Mod

Posted by Hi Yah on 23 May 2009 - 01:07 PM in General Nerf

If you are very good with your hands and a dremel, and you follow directions well, you can do an Angel Breach. If you can't, then get some CPVC from Home Depot and single it.

#230873 Plumber's Goop Question

Posted by Hi Yah on 17 May 2009 - 06:24 PM in Modifications

Hello everyone I have a question. Recently I have heard plumbers goop has failed in heat. I was wondering about what tempature it fails if any. All help will be helpful.

I have never heard of a case where goop hasn't work in heat. It has always worked for me.

#226864 Lock N' Load Problem

Posted by Hi Yah on 28 April 2009 - 04:20 PM in Modifications

Have you lubed the plunger head yet? If not, that is most likely your problem.

#227808 Ls Help

Posted by Hi Yah on 03 May 2009 - 12:49 AM in Modifications

I use stock darts.

When in doubt, go with thick wall.

#230684 Help With Frankenfinder

Posted by Hi Yah on 16 May 2009 - 09:27 PM in Modifications

Are you talking about putting a longshot plunger tube and plunger head in a nitefinder? If so, then I'd recommend a bbb and a nf.

#245751 Another At3k Question

Posted by Hi Yah on 06 August 2009 - 06:02 AM in Modifications

With a tight barrel I would recommend 6 inches.

#272850 Titan Problem

Posted by Hi Yah on 20 April 2010 - 09:57 PM in General Nerf

I've heard of people fixing this problem by lubing the pin and then putting goop on it.

#244913 Lanard Hand Cannon Internals?

Posted by Hi Yah on 31 July 2009 - 05:14 PM in General Nerf

Check the internals directory. It is pinned.

#226673 Stefan Dart Tutorial Video

Posted by Hi Yah on 27 April 2009 - 07:45 PM in General Nerf

I wouldn't recommend using Frost King foam or using scissors to cut your foam. If you use a razor blade your cuts will be cleaner, straighter, and the darts will fly better. You might also want to put your cut blanks in the dryer then proceed on making the dart. Other than that it was a good tutorial with clear and concise directions.

#239422 Pistol Splat Help

Posted by Hi Yah on 30 June 2009 - 01:57 PM in Modifications

I say just use epoxy for just about everything. And the gap in the plunger head I would reccomend filling it with goop. Also, make sure to lube every moving part and to add another catch spring.

#227851 Saving For Guns?

Posted by Hi Yah on 03 May 2009 - 09:58 AM in General Nerf

Definetely don't get the vulcan. If you are not very good at modding you will break it and have just lost $40. The vulcan also get shitty ranges and isn't a war worthy gun. Get a big salvo and a pistolsplat, that will be a lot better than a vulcan, and it's about $10 cheaper.

#247879 Couple Of Questions

Posted by Hi Yah on 20 August 2009 - 07:02 PM in General Nerf

At wars people are expected to bring their own darts. To fix your rotation issues on your maverick I would do cs's mod and trigger spring relocation.

#266330 At3k Barrel Help

Posted by Hi Yah on 21 February 2010 - 03:38 PM in General Nerf

Use CPVC that's is drilled out with a 1/2" drill bit.

#255627 What Type Of Tubing Will Fit 13mm Fbr? resolved!

Posted by Hi Yah on 07 November 2009 - 07:13 PM in General Nerf

Just take your foam to different stores and check the fit in various barrel materials. It's as easy as that.

#237253 At2k Problems

Posted by Hi Yah on 18 June 2009 - 08:22 PM in General Nerf

Ok guys I`m haveing troubles with my air tech. When it`s closed it pumps but when it`s open it works fine. I`m desperet for help if you thimk you know what it is then send me a message. It would really help.

You say when its closed it pumps, but when it's open it works fine. What is the problem? You never say what happens when you try to fire it closed.

P.S. even a working air gun will pump when closed, and when it's open, work fine.

EDIT: mr.little beat me. Please ignore.

#254248 I Need Help With A Female 1/2" Npt Coupler

Posted by Hi Yah on 21 October 2009 - 06:54 PM in Modifications

Why don't you just remove the coupler and replace it with a slip CPVC coupler?

#245750 Solvent For Plumbers Goop?

Posted by Hi Yah on 06 August 2009 - 06:00 AM in Modifications

In my experience with goop a little elbow grease should work most of the time.

#237119 Keyboard And Screen Sie Issues

Posted by Hi Yah on 18 June 2009 - 11:45 AM in Off Topic

Take a compressed air can and use the straw to blow out dirt from under the keys. You can find the compressed air can at Office Depot.

#258621 Specific Nightfinder Question

Posted by Hi Yah on 11 December 2009 - 07:39 AM in Modifications

Just fill it with epoxy putty and sand it smooth.

#226952 Topic Outline

Posted by Hi Yah on 28 April 2009 - 07:40 PM in Site Feedback

When I went on here today and went in a topic not only that I've seen but also posted in, I saw only the original post. I thought, "that's weird. What happened?" Then I looked at the bottom and noticed this weird outline thing at the bottom. It looked just like the homework I was supposed to be doing, except about Nerf. I clicked around a bit, and realized that you had to click to see each post. I thought "man that's weird. Is there a way to get it back to normal?" Well I haven't found a way. Is there? And am I the only one who noticed this? Any help would be appreciated.

EDIT: I just logged out and noticed this wasn't an issue. How do I fix this?

No, I happened to me also.

#275353 Big Blast Question

Posted by Hi Yah on 19 May 2010 - 07:49 PM in Modifications

Use JB Weld. You can find it in a lot of stores.

#254473 Rscb Clip Stabilizer?

Posted by Hi Yah on 24 October 2009 - 07:22 PM in Modifications

On my RSCB'd bbb I just twisted the clip so it's pressed up against the side of the gun.

#237487 Hornet Madness

Posted by Hi Yah on 19 June 2009 - 07:23 PM in Modifications

Unless you are a pretty good modder, I wouldn't even bother fixing it. The hornet is pretty hard gun to mod, even fir experienced modders. The end result won't even be worth it. You bought it at a garage sale, so it probably wasn't more than $5. If I were you I would scrap it. It has tons of parts.
If you really want to fix it, I would submerge the internals in water and pump it and see if bubbles come. If so, then goop up the spot.

#274962 I Need Help

Posted by Hi Yah on 16 May 2010 - 06:06 PM in Modifications

Just use a rubber washer to create the seal. That's what Ryan201821 used on his rear loading DTG/AT3k integration.

#253993 Replacement Xbow Trigger And Catch Springs?

Posted by Hi Yah on 19 October 2009 - 07:44 PM in Modifications

Home Depot sells a pack of small industrial springs that come in all shapes and sizes. These have work great for me in a variety of guns, so I don't see why it won't work with a crossbow.

#252785 Bbb Spring

Posted by Hi Yah on 06 October 2009 - 07:52 PM in Modifications

I would recommend using a recon spring, with 1.5 of a nf replacement spring, and a PVC coupler cut to 0.75 inches.

#240766 Issues With Opening A Vulcan - The Slide

Posted by Hi Yah on 08 July 2009 - 06:16 AM in Modifications

On my Vulcan I could remove the bar with my hands pretty easily.

#252291 Silencing Your Longshot.

Posted by Hi Yah on 01 October 2009 - 06:57 AM in Modifications

Pretty much the only way to silence a gun is to fill it with foam and add padding to the plunger. You could add a weaker spring addition to make it a bit quiter.

#256843 Nitefinder Rifle Question

Posted by Hi Yah on 20 November 2009 - 07:37 AM in Modifications

Use 1" PETG from petco. It will fit the stock plunger tube pretty good. I believe that's what kbarker used.

#253867 Questions About Making A Rscb Clip

Posted by Hi Yah on 18 October 2009 - 06:58 PM in Modifications

Don't use brass. Use 1/2 inch copper to make the clip, this will fit the darts loosely and fit in the t-coupler. Use
1/2 CPVC for the barrel. CPVC will give you a tight dart/barrel fit, which you want when using a RSCB.

#250897 Bbb Value Questions

Posted by Hi Yah on 19 September 2009 - 07:30 PM in Modifications

Definitely get the bbb. I'm a huge fan of bbb's and for $20 they make pretty good primaries. Just coupler it and slap on a RSCB and you'll get range and rof.

#229320 Problem With Stefans

Posted by Hi Yah on 10 May 2009 - 08:31 AM in Modifications

It all depends how your foam fits your barrels. I believe you are using Home Depot foam, as do I. My foam fits my barrels tighter than cdtd's so they go a bit further.

#270463 At2k Turret

Posted by Hi Yah on 27 March 2010 - 10:20 AM in Modifications

Dip the barrel side of the turret in boiling water of about 10 seconds. This should soften the glue and the barrels should come out.

#233601 Marshmallow

Posted by Hi Yah on 31 May 2009 - 01:44 PM in General Nerf

I'd recommend that he lose the recon and get a big salvo, dtb, or hornet. All those guns will give better ranges and pretty good rof.

#266047 At2k Help/fix

Posted by Hi Yah on 19 February 2010 - 07:23 PM in General Nerf

If the pump is plugged the lump of hot glue might have busted your check valve.

#264533 Cpvc'd Air Tech 2000

Posted by Hi Yah on 06 February 2010 - 07:44 PM in Modifications

Try drilling out the cpvc with a 1/2" spade bit. It'll give the barrels an air-gun fit with most hardware store foam.

#227375 Nb-2k

Posted by Hi Yah on 30 April 2009 - 09:21 PM in Modifications

Great use of a shitty gun. Looks great too!

#248186 Crossbow Help

Posted by Hi Yah on 22 August 2009 - 08:03 PM in Modifications

I really want a crossbow but dont have alot of money so I was thinking using slugs mod to it I could make
homemade internals for a crossbow shell.

is it possible?

Please dont ban me!!!!!

So you want to have a crossbow shell with + bow internals? That can be done, but it will be hard. Unless you are really experienced at modding and machining parts you should not attempt this mod/homemade.

#251811 Need Some Help With Nf Mod Troubleshooting

Posted by Hi Yah on 27 September 2009 - 07:55 AM in Modifications

Try getting some CPVC, it's about the same price as PETG but has a tighter fit.

Hi Yah's Content

By content type

See this member's

Sign In