Hi Yah's Content

#261636 "paintball" Guns

Posted by Hi Yah on 12 January 2010 - 10:22 PM in General Nerf

It looks like a pistol splat on steroids. Also, you mentioned that the spring is longer, but is it stronger?

#262014 "paintball" Guns

Posted by Hi Yah on 16 January 2010 - 11:27 AM in General Nerf

Thanks for all the pictures. This gun looks very promising.

#256634 "silencing" My Nf

Posted by Hi Yah on 17 November 2009 - 08:42 PM in Modifications

How is the fbr method expensive? It cost about $3 for a 20' roll, and you only need about 1' to silence it. That's about 15 cents to silence your nf.

#226277 7 Shot Scattergun Attachment

Posted by Hi Yah on 26 April 2009 - 05:51 PM in Modifications

Thanks for all the support, guys! I actually prefer not to plug pumps on my air guns because I don't really trust myself. I thought about it and I'll probably plug up the 7th barrel. I want bettter ranges, dammit!

While at it you might aswell do a tank expansion.

#269643 A New Petg Breech

Posted by Hi Yah on 19 March 2010 - 06:58 PM in Darts and Barrels

Why not just use e-tape to allow the PETG to slide in the PVC, instead of the brass?

#231770 A Nice Find...

Posted by Hi Yah on 21 May 2009 - 09:11 PM in Modifications

This is pretty cool. I'm wondering what the name of the gun is?

#231162 A Short Story.

Posted by Hi Yah on 18 May 2009 - 07:02 PM in General Nerf

These guns look really similar to the SM5000 and a SM500.

#240169 Air Zone Scorpion Bow Optimization

Posted by Hi Yah on 04 July 2009 - 05:03 PM in Modifications

I did something similar to my bbb, except I cut the CPVC coupler in half and glued it inside the PVC coupler. Then, I glued that to the front.

#253725 Airtech 3000 Overhaul

Posted by Hi Yah on 17 October 2009 - 07:30 AM in Modifications

Couldn't you cut down the pump so all the tubing is internal?

#255421 Airtech 4000 Overhaul

Posted by Hi Yah on 05 November 2009 - 06:55 PM in Modifications

Great work as usual. I definitely think the at4k is an underestimated gun. Nice mod.

#232037 An Open Letter To New Posters And Anyone On The Waiting List!

Posted by Hi Yah on 23 May 2009 - 01:15 PM in General Nerf

This is a great thread. This is exactly what I did. I lurched around the site for 1 year, and then I created an account. Is it really that hard to make proper posts and read the COC?

#276399 Angel Breeched Longshot Help

Posted by Hi Yah on 30 May 2010 - 05:45 AM in Modifications

Try fishin' glue.

#261727 Angel Breeched Spring Replacement

Posted by Hi Yah on 13 January 2010 - 09:12 PM in Modifications

Try an Ace 69 spring.

#245751 Another At3k Question

Posted by Hi Yah on 06 August 2009 - 06:02 AM in Modifications

With a tight barrel I would recommend 6 inches.

#229424 Anything Better Than Nite Finder?

Posted by Hi Yah on 10 May 2009 - 05:19 PM in General Nerf

Big Blast are about $9, give superb ranges, and make great primaries.

#260201 At2k Help Needed

Posted by Hi Yah on 30 December 2009 - 06:56 PM in Modifications

I too believe that you busted your check valve. Also, why do you make so many help threads?

#266047 At2k Help/fix

Posted by Hi Yah on 19 February 2010 - 07:23 PM in General Nerf

If the pump is plugged the lump of hot glue might have busted your check valve.

#237253 At2k Problems

Posted by Hi Yah on 18 June 2009 - 08:22 PM in General Nerf

Ok guys I`m haveing troubles with my air tech. When it`s closed it pumps but when it`s open it works fine. I`m desperet for help if you thimk you know what it is then send me a message. It would really help.

You say when its closed it pumps, but when it's open it works fine. What is the problem? You never say what happens when you try to fire it closed.

P.S. even a working air gun will pump when closed, and when it's open, work fine.

EDIT: mr.little beat me. Please ignore.

#270463 At2k Turret

Posted by Hi Yah on 27 March 2010 - 10:20 AM in Modifications

Dip the barrel side of the turret in boiling water of about 10 seconds. This should soften the glue and the barrels should come out.

#266330 At3k Barrel Help

Posted by Hi Yah on 21 February 2010 - 03:38 PM in General Nerf

Use CPVC that's is drilled out with a 1/2" drill bit.

#256920 At3k Internals Questions

Posted by Hi Yah on 21 November 2009 - 08:32 AM in Modifications

Use 3/16 barbed connectors. I know Home Depot has them, but I don't know if Ace has them.

#256889 At3k Internals Questions

Posted by Hi Yah on 20 November 2009 - 09:46 PM in Modifications

You could just cut the tubing as close to the goo gauge as possible, on both sides. Then you can attach tubing with barbed connectors.

#274322 Barrel Length Guide . . .

Posted by Hi Yah on 08 May 2010 - 08:51 PM in Modifications

For your nf barrel lenghts I would recommend 4"-4.5" for CPVC. And about 5" if you're using brass. Brass isn't as tight as CPVC. And PETG is in between CPVC and brass.

#252785 Bbb Spring

Posted by Hi Yah on 06 October 2009 - 07:52 PM in Modifications

I would recommend using a recon spring, with 1.5 of a nf replacement spring, and a PVC coupler cut to 0.75 inches.

#250897 Bbb Value Questions

Posted by Hi Yah on 19 September 2009 - 07:30 PM in Modifications

Definitely get the bbb. I'm a huge fan of bbb's and for $20 they make pretty good primaries. Just coupler it and slap on a RSCB and you'll get range and rof.

#234277 Bbbb : Lerazor Variant

Posted by Hi Yah on 04 June 2009 - 02:24 PM in Modifications

"Rear loading was well over 200ft"
I'm calling BS on that

Yeah, that's is impossible for a big blast to shoot 200 feet.

Hi Yah's Content

By content type

See this member's

Sign In