- → blink 182's Content
blink 182's Content
There have been 332 items by blink 182 (Search limited from 09-January 93)
And You never said a thing to me afterwards. I was there for about 20min after my gun broke...
On the plus side I now have a year to make a doomsayer...yea or something like that. Expect a pm duffy.
To see if this place has finally been taken over by machines ran by monkeys ran by pirates ran by ninjas (no DBF Pun Intended) All Ran By Duffy...
And for the Hell war Mike has now made his yearly ritual. Thank you for that.
I'm sitting in my basement watching t.v and a commercial for a new nerf gun that now makes you coffee and does your laundry comes onto the tube. Mike you called me about a week ago to check on things and what not. Count me and my girlfriend in on this one.
I'll be sticking true to my roots rocking the bolt 5k and my lady will run with my 3B and a spray of inaccurate darts named the Rf20.
I do have a couple favors to ask of yea Mike.
Can I borrow a pistol or two for the war. I'm fine for normal play but for sidearms only.
I haven't made darts in years and from what I remember all I could get my hands on was the joy of grey FBR...how about some red for me and my girl?
And mike i'll make it worth your while...box of say; peach, on me? well shall have a good time after.
Count me in on the 25th. I got my civic up and running. I live in Woodbridge (Hwy 427 and Hwy 7) so if anyone lives around here and is ride-less feel free to impose, its no hassle.
Lets See If We Can Freeze Hell Over On This One...
Ps: Duffy if you need anything (flags - marking tape - water - ect.) Feel free to let me know i'll stop by a wally world or crappy tire on the way up and pick some stuff up.
I also have a HUGE inflatable paintball bunker that I would be more then happy to bring... it could make a sweet home base?
The V2 and V3 are coated with a new type of spray that allows you to use the swabs. FBR would'nt be a problem unless it was Raw carbon inside the tube where it could pull a thread lose and render the barrel useless. I would do some research before anyone goes down this route.
Question. I have had a cold war before, but never a full out winter war. What are you guys going to wear to keep in retrospect with the snow?
Looking forward to meeting you all.
I talked to the others and there busy hard times with work and what not. I still have to run it by work and I hopefully have the day off. It all depends on them if I'm able to come or not.
This should be fun. I'll be sure to break out the makeshift gillie. I'll have to take a white spray paint can to it this time for a little spray over.
I'll be sure to look over the area and see what were playing with. Time to get into war mode mates. I'll be looking forward to meeting you all this weekend.
I just quickly read through the thread and I HIGHLY x4370943902 say not to use this modded gun called the titan if it is single. I'm still stuck in the old school world of nerf and have never fired one. but doing a little research with ranges pumping 180+...thats not gonna flow. Sure you can be wearing 6or7 layers but I can put money on it that your not wearing that over your face...the part of your body that will hurt the most when hit. And please don't call me a pansy but i'm sure you would just love to take a dart like that from 20 feet to the face, in bloody cold weather to make it feel all that much nicer... Ask FA about how many face and head shots occurred during our last outdoor war. Heck mike got hit square in the glasses! I'm not to happy with that rulle being passes but thats just one dudes spill. Feel free to ignore the advice.
I haven picked up a nerf gun in around 3 yeas, and to tell yea the truth I bloddy miss it!
I'm Tony And I have been shooting darts for around 6 years, gave it up for awile but I wanna play another war. I talked to angle about my gun situation. I do (I think somewhere) have my old 5k but no side arm. If someone would'nt mind lending me a loner LNL, that would be PRIME!
I think i'm gonna pull my shit together in 5 days and try and make it down to the war guys. Prep to see me in black and green with a nice gillie coating to top it off:) Boy I love flank losers:) I'm bringing my talkies so I would love to stay in contact with the head pants of my team. I think I took this game WAY to serious
Well I'm looking forward to meeting with you guys and I will stay in touch with angle.
The cheaper solution that would require some machining is to simply link a lever-arm ball valve to a servo to make your own solenoid controlled valve. Or use a push-button valve and a solenoid (this option will give you a much wider variety of voltages to choose from).
Could you explain a little more on the push button valve and the Solenoid, sounds preaty cool?
Here are some thing's I have come up with:
Have a bolt conntected to the main clock spring (the main mag spring) that runs the entire circle length of the mag. Then when you have to re-load, just pull this bolt back and lock it in a notch in the center of the mag. Picture a pistol mag with a piece coming off of it. you pull this piece down to bring the spring (platform that pushes the bullets up and into the chamber) to the bottom of the mag.
If you find a way to make it detachable (Clips? Locks?) You wont need to have a speed re-load! Picture being able to hold 30 darts in each mag and being able to switch them up in under 10 seconds! If you have 3 mags thats 90 shots! If you fire more then 90 shots in one round...you need to work on your aim not your spray!
2 motors-controls the speed/distance of the dart. These 2 motors are in charge of giving the dart power. They spin at a relatively high speed (I would have to guess) and propel the dart. These 2 motors are located above the 2 northward shafts on the gun. They are white wheels
1 motor- is located underneath the vertical mag. This motor is in charge of giving the stack of darts (i.e. Mag) the necessary forward movement needed to propel the darts into the other 2 horizontal motors. Although hard to see the wheel (almost looks like a black wheel located dead-center underneath the dart stack, the motor is easy visible. (Blue and silver box with a lime green wire crossing over it.)
The entire gun looks to be ran by a single 9 volt battery (as par the battery box located by the handle) I can only see a black and red wire protruding from the handle and a semi-square battery attachment (chances are it’s a 9-volt) Although the batteries could easily be hidden throughout the hollow gun body.
From what I conclude, it looks to be that the 2 “power” wheels are ran off of the smaller southward button and the larger button controls the single mag wheel.
To fire simply hold the smaller red button to power up the “power” wheels and when ready to fire press/hold the larger mag button. This would then push the dart into the “power” wheels and giving the dart the power to propel.
Don’t quote me on ANY of this information as this is just my take on the gun.
Beautiful design and simple yet constructive idea. I tip my hat to you 3DBBQ
Well on a side not, I play paintball. I paintball more then nerf, but I still haven’t forgotten my roots. I got a nice setup:
- 2005 Bob Long Naughty Dog Intimidator (Red – Black Fade)
- Virtue Board
- 68ci Empire Adjustable Fuel Tank With Black And Red Empire Cover
- Red Halo B With Cheetah Board And Rip Drive
- Stiffi Switch Kit
- Empire Action Pack (3+4)
- Dye LockLids
- Dye C6 Jersey
- Dye C6 Pants
- Empire E-vents
A5 with a custom q-loader mount. It's got a TON of ups.
Zeus G2+ with every up out there.
I play both woods and speedball, but mostly speedball.
-Mix a Vegi oil and WD40 mixture up within a small bowl.
-Grab a Q-Tip and dip it into the mixture (Be Generious)
-Soak the black seal at the bottom of the barrel with the mixture and let it dry for around 5-10 min.
-This solution might work. The wd40 will repair the "dried out" o-ring and the oil will help it to create a seal. Let it dry and repeat it again. This should do the trick.
But please guys, just stick to 2k's...
Ps: Phantom's Kick It!!! I use to have one when I played Stock Class!
As for the semi-auto, try tinkering with the valve. If you can get it to snap back into place (elastic maybe) you just might get it to work.
1) Wire the system to the pre-existing pressure switch located already on the laser then attach a AAA instead of the 3 small watch batteries.
2) Tape/lock the trigger down, then when re-wiring the battery you just put the switch on the negative wire. This will cause a kill in the circuit therefore turning off the laser.
I did it way 2 and also used a AAA. It worked quite nicely.
Ps: Angle, give me a call when you guys war, I would love to have a clan vs. clan war? Sounds cool?
HEY...I am 5 minutes away from the Bass Pro Shop ambushbug. In Vaughan Mills right? Well if you’re interested, I and a bunch of other Canadian nerfers have our own little clan, CFM. We would love for you to stop by and join us for one of our wars...what do you think?