Jump to content


david00790's Content

There have been 46 items by david00790 (Search limited from 14-November 92)


By content type

See this member's


Sort by                Order  

#36074 Semi-auto 2k Prototype-its A Start

Posted by david00790 on 01 September 2004 - 10:11 AM in Modifications

I did that same mod with a loser rifle like two years ago but nice try.



#25652 Age

Posted by david00790 on 06 May 2004 - 10:03 PM in General Nerf

Whatever...



#25621 Age

Posted by david00790 on 06 May 2004 - 03:39 PM in General Nerf

Holy shik dude, I think someome like hacked onto my computer(or one of my sibs got on.....) because thats not the kind of thing that I would post. Sorry tanner07. Walks over towards younger brother with fist in palm.



#25608 Age

Posted by david00790 on 06 May 2004 - 02:30 PM in General Nerf

[/QUOTE]Im 14 going on 15 on may 21. (owe ya!) It would be weird nerfing with my dad for one thing my dad doesn't sit on the sofa all day or on the computer, he is other doing work or cleaning. So to even get time with him to do that would be hard. Also i don't think my friends and eye would be able to act like are selves we would be like cussing cause we just got shot right in the eye or something and then bam you look over and see my dad it would just be weird i think. [QUOTE]


Yes, and eye is working on getting ontwo being licke a 7 years odds spelling bok. I allso like to bye weirded with mi dad when nerfing too. (he ownes me) Mi dad iz a janator that when not working on me is cleening up after mi moms. BAM i cuuss cause i get lik shut in the I and my grama is looking at my like WTF you cannnnot cuss fronta of mi bizatch yea-ah mi gramma and i are wired together allso.



#24908 Nerf Grenades

Posted by david00790 on 26 April 2004 - 05:38 PM in Homemades

But what happens if you drop the lit firecracker right down your shaft. That would probably teach you some respect. Couldn't resist :P



#24777 Unnamed Eab Creation

Posted by david00790 on 24 April 2004 - 10:39 PM in Modifications

One word, nice. :lol:



#23067 My Bolt Rifle

Posted by david00790 on 31 March 2004 - 07:13 PM in Homemades

What kind of ranges do you get with that thing.



#22861 Powerclip Problem

Posted by david00790 on 29 March 2004 - 09:48 PM in Modifications

Ok, here is how to fix your problem, i doubt that you are missing a part but what happens with some powerclips is that the clip does not fix tightly enough in the gun and the clip just slides back down after going up. what you do is put two strips of electrical tape on the edges of the clip. this is hard to explain but here we go... they are the two edges that stick out from the front of the clip and you want to fold the electrical tape around both rounded edges so that the clip fits more tightly into the gun. Good luck.



#22850 New Gun: Night Sight

Posted by david00790 on 29 March 2004 - 09:10 PM in General Nerf

Hey, i remember you... Nice to see that your still around.



#22569 Sm5k Expanded Airtank

Posted by david00790 on 27 March 2004 - 06:52 PM in Modifications

If you want to expand the airtank then you have to cut the current vinyl tubing and expand with tubing from a hardware store.



#22568 Insane Basement Action!

Posted by david00790 on 27 March 2004 - 06:50 PM in Nerf Wars

Your post name sounded like some sorta porn video title...



#22361 Barrel Porting

Posted by david00790 on 25 March 2004 - 01:19 PM in Modifications

I don't know, but it sure looks cool :D



#22353 Modding To The At2000

Posted by david00790 on 25 March 2004 - 10:16 AM in Modifications

Take a look at my mod.



#22294 How To Modify An Airtech 2000 For Beginers

Posted by david00790 on 24 March 2004 - 02:15 PM in Modifications

Just thought that I would do a quick write up for those just begining or with limited supplies, enjoy! This mod will allow you to fire homemade mirco's or regular nerf mirco's. Also, if you would like to purchase a pre-modded (this mod or a different one) at2k or a nib one so that you can do you own mod please contact me!

First, find a hard, uncluttered table. You need at least a three-foot diameter clear for working space. Next, gather these supplies:

1. The Gun
2. Small, skinny Phillips head screwdriver
3. Hot Glue Gun and lots of glue


Start by unscrewing the screws from the casing. After that, grab the back of the gun, and making sure all of the screws are out, pull apart until a red cap pops off the casing and the gun opens. Remove the pump from its tube and fill the hole on the top with hot glue. When it dries, replace the pump. Apply hot glue to the spring on the valve pin to make it harder to compress. Moving on, take out the orange barrel assemble and, after taking out all of its three (you might have to rotate the barrels to see the ones at the bottom) screws, rip off the four barrels. Some springs and air restrictors should pop out, if not, use your screwdriver to get the stuff out. Replace the barrels with some hot glue and screw the gun back together, forget the cap. The result of this mod should hopefully be a farther shooting, more accurate gun. Make sure not to over-pump it, since you plugged the air release valve, four to five should be enough, six if you really have to.



#21266 Best At2k Mod For Stock Micros

Posted by david00790 on 13 March 2004 - 02:33 PM in Modifications

Who is majin?



#21251 Best At2k Mod For Stock Micros

Posted by david00790 on 13 March 2004 - 10:39 AM in Modifications

thanks for clearing things up, i will stop.



#21249 Best At2k Mod For Stock Micros

Posted by david00790 on 13 March 2004 - 10:31 AM in Modifications

It got 20 feet more range...120', and also was accurate to 105', which is about 25' more accuracy. that is what you said when talking about your expaned air tank single barrel. now this is what you said about you multi.
Dont single it...My multi-barreled 2k goes farther than my singled*...and multi-barreled has alot more rof...

*Extended airtank...

THIRST



#21246 Best At2k Mod For Stock Micros

Posted by david00790 on 13 March 2004 - 09:36 AM in Modifications

So you guys really think that thirst got over 120' feet with a 4 barreled 2k??? Back on topic now, remember when i said for him to single it for great range and accuracy, yeah i didn't mean expanded airtank, just plug the vavle,bic pen, and attach a pvc barrel.



#21232 Best At2k Mod For Stock Micros

Posted by david00790 on 12 March 2004 - 10:37 PM in Modifications

there is a difference between quoting and reffering to but ... whatever.

i do not question black wraths sm5k i have no doubt that you work very hard on that gun. my 5k does not get those ranges. my 2k is a weapon that i put a lot of work into and i don't like it when people question the ranges i say that i get. they are what they are. I am not perfect, the wind could have affected the darts or i could have jerked the gun upword a bit as i pulled the trigger. but these are the ranges that i believe that i got, measured with an 100' tape measure. remember when you said that your multi barrel got better ranges then your single barrel? and also how you said that your single barrle gets 120'. that would mean that your multi barrel gets what maby like 135' which would be better than black wraths 5k interesting... and so what range did your blast fires get, the semi auto ones?
wow!!! you have great guns Gayb- i mean thirst you have a multi barrel at2k that get upwards of 120' and what is this about my mshot? and dude, i have more guns than you have pubes :cry: jk you don't have any... oh well back on topic, i have exsactly 57 foam shooting guns that fire. and if you want to talk night finders then mine gets 89' and my my brothers tech target that i modded gets a little above that. my lnl gets 75' and i have more original modifications/integrations than you. period.



#21230 Best At2k Mod For Stock Micros

Posted by david00790 on 12 March 2004 - 10:23 PM in Modifications

I said 277' in reference to his post.



#21227 Best At2k Mod For Stock Micros

Posted by david00790 on 12 March 2004 - 10:17 PM in Modifications

Did you look in the modifications section like i told you, now you are contradicting cxwq on range increase from draining goo.



#21225 Best At2k Mod For Stock Micros

Posted by david00790 on 12 March 2004 - 09:59 PM in Modifications

SHIT, I just had a really long responce that i just tried to post but got the " cannot find page crap" damn oh well here goes again.

Starting with cxwq,
1. Would you call the max shot a home made too, it has some pvc or cvpc incorperated?
2. The trigger is stiffer on a 2k and i personally can pull it faster. i also did a bic pen mod on it.

THIRST,
1. Your tiny expansion make almost no difference in range, look at the mods section and click on the top mod thing the one about the goo gage experimant. Also, i take your saying that expanding the airtank is worthless as in insult to my modding skills.
2. My words were not against your modding skills, but against your mod, like i said all you did was drain the goo gage, so you have no right to say how bad expanded airtanks are because you have never seen one with a significant expansion.
3. My gun takes less time to prime than a 5k. and if you want to see some ugly guns let me refer you to this.
Don't insult my guns.

I do not want to start a topic like L@@K MY GUNZ BLOW HOLES THROUGH CONCRETE AT 277 FEET. but i would like to say that the only guns that i have that excede normal ranges are:
1.my 5k - 110' level shot, level ground.
2. my expanded airtank 2k- 140 level shot and ground.
3. Ironically, my de-expanded xp-75 super soaker gets the best range of all. the big water tank has been replaced with about 6" of pvc so that you only beed to pump it 6 times utill you get ranges of around 160' everything level.

THIRST,
All pf your creative mods have been with the blastfire, which I think is an overrated gun because after modding 5 myself i found that they gennerally get 70-80' at a slight angle. They have a very bad trigger pull and aren't terribly accurrate. The one thing that make them special is their semi auto capabilities. I would rather have four good shots with a 2k than 5 faster OK shots with a blastfire.



#21171 Best At2k Mod For Stock Micros

Posted by david00790 on 12 March 2004 - 09:06 AM in Modifications

No, you don't understand, the airtank is about 1 1/2 times the size of a 5k because the airtank is like 6" of pvc with a big endcap. the shot might have been at a slight angle about 5 degrees. also the valve on an at2k releases air faster than a 5k so i get better range. will say more later but have to go now.



#21170 Good Modding Gun?

Posted by david00790 on 12 March 2004 - 09:02 AM in Modifications

just be careful, the sharpshooter1 is a great weapon.



#21153 Best At2k Mod For Stock Micros

Posted by david00790 on 11 March 2004 - 09:17 PM in Modifications

Then you didn't do the expansion right because my cpvc'd at2k gets over 150' feet flat with 10 small pumps.



#21128 Best At2k Mod For Stock Micros

Posted by david00790 on 11 March 2004 - 07:10 PM in Modifications

make it single barrel pvc. with that mod you should get great range and accuracy with stock mircos.



#21103 Funnier Videos And Quite A Frightning One

Posted by david00790 on 11 March 2004 - 02:04 PM in Off Topic

you gay mother fucker i just almost lost my lunch because of you. i hope that you get 20 tapeworms that your gay boyfriend pulls out of your ass you perve.



#21098 My Stock Crossbow Sucks

Posted by david00790 on 11 March 2004 - 10:40 AM in General Nerf

That one made me laugh!
Nice job janga.



#21032 Most Interesting 1500 Break I've Seen

Posted by david00790 on 10 March 2004 - 11:18 AM in Modifications

same thing has happened to me too. just take the base of the tube and make a flinging motion that should work.



#20823 Need Help With Plunger On Expand A Blast

Posted by david00790 on 06 March 2004 - 08:51 PM in Modifications

Uh, my advice would be to make sure that the cocker isn't upsidedown.



#20634 Are They Still Selling The Airtech Series Anywhere

Posted by david00790 on 03 March 2004 - 07:48 PM in Modifications

i have a 3000 brass modded that i will sell to you for 25 + 5 S&H. i shoots like 60 feet level with good brassfitting darts. in good condition, will hold air overnight.



#16236 Sneakshot

Posted by david00790 on 12 January 2004 - 11:29 AM in General Nerf

Um, this is a little off topic but i'm selling some stock ammo on ebay and this guy asked me if my ammo would fit the sneakshot. What kind of ammo does the stock sneaksot take?



#15949 Broken 1500

Posted by david00790 on 07 January 2004 - 05:00 PM in Modifications

I have modded about 5 at2k's with that problem. If you are talking about how air will start leaking out as you pull the trigger then what you need to do is, first, determine how bad the leak is. in order to do this you pump it up and then pull the pin. if you get a decent amount of air to shoot out then try doing a very exact bic pen mod. this should shorten your trigger pull enough to shoot the gun with minimal leakage.



#15182 Famas Bullpup Rifle

Posted by david00790 on 28 December 2003 - 01:48 PM in Modifications

Great thinking i am very interested to see how this gun turns out. How are you going to manage the rear clip?



#15053 My New Modded At3k

Posted by david00790 on 25 December 2003 - 09:35 PM in Modifications

Thank you, Thirst, for explaining that pressure is the main factor in the distance that you get. But, the trick is to find the right balance of barrel friction, air pressure, amount of air, and barrel length. for an at3k with an expanded airtank of that size, 20-25 pumps will give you better range. The downside is that your expanded airtank decreases the rof, which is what the at3k has over the at2k. So to say simply what i am trying to get accross, if you are going to do my expanded airtank mod on the airtech series(which i have been doing for six months.)

1. Give me credit
2. It works best on the at2k
3. Don't over do it, 3-5" of pvc will give you 10-15 pumps and tons of range.
4. Cpvc is the best barrel material for expanded airtanks because it provides lots of barrel friction which works because of a large amount of air at a high pressure.(Use brass size darts, they should fit tightly.)

The purpose of this modification was, for me, to help make the at2k into one of the most moddable guns. i.e. it can be made into a assault wepon, a reliable, and very stong pump pistol, and a long range "loser."

As an afternote, you really need to learn how to cut brass.



#14856 At2k/at3k Mod

Posted by david00790 on 22 December 2003 - 11:45 AM in Modifications

yes, i have done that. here are some pics.

http://www.geocities...90/techie2.html
http://www.geocities...90/techie3.html



#14666 What Your Main Gun Looks Like

Posted by david00790 on 19 December 2003 - 10:54 AM in General Nerf

Ok, here are my main weapons. first is a switch shots max that has been heavily modded to make it into what i belive is the most versitile gun ever created, right up there with my max shot. its airtank has been reduced so it only takes 7 pumps to prime and its barrel assembly has been replaced with one from a sm1500 to achive a better seal and make it more sturdy and reliable.My second gun is a at2k inside of a sm1500 casing. the airtank has been expanded to allow 10 pumps. I would like to receive credit as the first person to expand the airtank of an at2k. i know that this part of the post should probably go in mods... but oh well here it is. First you take a hacksaw to the tip of the orange goey chamber then, using a screwdriver, poke a hole in the rubber membrane below. pvc will fit right over the solid orange part. use pvc cement to put an endcap on the pvc and then cement the pvc to the orange stub.

ranges on these guns are.

switch shots max single barrel side- 140-150 feet at a slight angle
switch shots max 4 barrel side- 90-100 feet
at2k expanded air tank- 145- 155 feet at a slight angle

here are the links
at2k pic 1
shot that proves that it is an at2k
switch shots max



#14584 Xxl Pic

Posted by david00790 on 18 December 2003 - 01:15 PM in Modifications

My tru has them in stock.



#14582 Xxl Pic

Posted by david00790 on 18 December 2003 - 10:08 AM in Modifications

I think it is an ultimator remake.



#14568 Xxl Pic

Posted by david00790 on 17 December 2003 - 10:49 PM in Modifications

Here is a mod that I did after having to reconnect the spring :angry: :angry: :angry: (if you need instructions on how to do that pm me) what I did was take a odd pvc piece and after chopping out the air restrictor crap, was able to screw in. CPVC fits right into it for a cool breach loader.
the pic