Airsoftguy777's Content

#278309 Homemades Picture Thread

Posted by Airsoftguy777 on 22 June 2010 - 06:39 PM in Homemades

Mad plusbow parts. If you look closely you can see that there is something different for a few guns in this batch.... Muahaha.

Do I spy different handles? Those look comfortable as hell.

#278073 Diy: Hopper Clips

Posted by Airsoftguy777 on 19 June 2010 - 07:49 PM in Darts and Barrels

It does seem to be a friction issue, but not with CPVC, it's not even making it that far, just sticking in the wye.

What kind of darts are you using?

#277842 Modification and Paintjob Pictures

Posted by Airsoftguy777 on 15 June 2010 - 11:31 PM in Modifications

Look at what I got!
Posted Image

Hercules 1996 Xbow. NIB! Very similar to a LOTR Xbow as far as I know but ti is older.

Posted Image

Hercules 1996 BnA! NIB!
I may be willing to sell these if I get a good offer, PM me.

And...a random mod pic. Large two way pump turned HAMP.
Posted Image

#277205 Magstrike Problem

Posted by Airsoftguy777 on 08 June 2010 - 09:45 PM in General Nerf

OK i am so with my magstrike when i pump it and let go of the pump handle it pops out and so the tank can fill. Can anyone help me? Getting video up right now.
Your check valve is broken. Either make a new one or buy a new pump.
What is the check valve? This is the first time i have opened my magstrike because it wasn't working.
Just buy a new pump then if you don't know what I am talking about.
Could i just use a ball pump to replace it? Nevermind guys I should have know it was the check valve. I blanked on what it was untill i looked one up the i was like "Duh!"

That would be possible.

#277201 Magstrike Problem

Posted by Airsoftguy777 on 08 June 2010 - 09:15 PM in General Nerf

OK i am so with my magstrike when i pump it and let go of the pump handle it pops out and so the tank can fill. Can anyone help me? Getting video up right now.
Your check valve is broken. Either make a new one or buy a new pump.
What is the check valve? This is the first time i have opened my magstrike because it wasn't working.

Just buy a new pump then if you don't know what I am talking about.

#277197 Magstrike Problem

Posted by Airsoftguy777 on 08 June 2010 - 08:58 PM in General Nerf

OK i am so with my magstrike when i pump it and let go of the pump handle it pops out and so the tank can fill. Can anyone help me? Getting video up right now.

Your check valve is broken. Either make a new one or buy a new pump.

#276844 Mini $2 Knock Off Ttg

Posted by Airsoftguy777 on 04 June 2010 - 09:02 PM in General Nerf

I saw one at dollar tree.

#276566 Breaking Nerf News!

Posted by Airsoftguy777 on 01 June 2010 - 02:45 PM in Off Topic

Happy Birthday Split! I think I will throw in an extra foot of foam!

#272720 Skype Group Chat

Posted by Airsoftguy777 on 19 April 2010 - 08:38 PM in Off Topic

Skype Name:tanner_z.
Real name: Tanner
Preferred name: Tanner or Taz

#272620 Inverse Plunger Tube Reinforcement

Posted by Airsoftguy777 on 18 April 2010 - 08:27 PM in Modifications

A few weeks ago I did something similar with a nickel on a recon plunger. Except I used epoxy putty and lots of super glue.

#272515 Time To Look Inside... The Ldr!

Posted by Airsoftguy777 on 17 April 2010 - 11:26 PM in Homemades

Alright I get no one likes my paint job, its been brought to my attention ever since I showed it off here a month ago. That aside I will note to always paint my guns bright pink, and then ask for feedback...so possibly bring other cons (or pros hopefully) to my attention as well? Thank you.

Dont listen to people. If you like the black thats all that matters. Nerf isnt about looking gay with your bright pink blasters and it pisses me off when people say it is.

#272433 Longstrike Foregrip/shotgun Grip Mod

Posted by Airsoftguy777 on 16 April 2010 - 09:12 PM in Modifications

So it is a Deploy that cost $30 and doesnt transform?

#272432 Raider Tips

Posted by Airsoftguy777 on 16 April 2010 - 09:07 PM in Modifications

Are all these people trolls? Or are they serious?

#272207 Dart Door V2

Posted by Airsoftguy777 on 14 April 2010 - 03:44 PM in Darts and Barrels

So it is like one of the swinging check valve things?

#272108 Nerf Irc Room

Posted by Airsoftguy777 on 13 April 2010 - 04:23 PM in Off Topic

I was banned a few days ago by Bob? And I dont know for how long because they kicked me first. I asked someone to see why and this is what they came back with "because he inspires people around him to be assholes". Bob, can I get some assistance? Your PM box is full.

#271500 Little Bit Of A Raider Issue.

Posted by Airsoftguy777 on 06 April 2010 - 04:22 PM in Modifications

Pictures would really fucking help.

There is a picture dumbass.

#271166 Brass Breached Longstrike

Posted by Airsoftguy777 on 02 April 2010 - 11:25 PM in Modifications

What are the ranges?

Better than stock. It shoots streamlines, so getting ranges from that is not really going to work.

I forgot to mention that I put some electrical tape under the O-ring to help a bit, and that if you want to do that spring compresion mod, a NF plunger tube fits perfectly over the plunger and stops the spring.

I find 3/4 thinwall to work best.

#271163 Brass Breached Longstrike

Posted by Airsoftguy777 on 02 April 2010 - 10:49 PM in Modifications

What are the ranges?

#270816 Petg . . .

Posted by Airsoftguy777 on 30 March 2010 - 08:54 PM in General Nerf

Does anyone know where I can get it BESIDES the internet? Like a Lowes or Home Depot or something?

Search for a plastic supply around you, or check aquarium stores.

#270732 Hornet Tanks

Posted by Airsoftguy777 on 29 March 2010 - 08:11 PM in Modifications

Such as the orange thing on the bottom of the titan that the hornet connects to.

Airsoftguy777- Thanks but I'm using the button from my titan. For those who don't know it's the part where the titan conects to the hornet. It's the exact same thing only with a tubing conector.

I said this earlier.

#270729 Hornet Tanks

Posted by Airsoftguy777 on 29 March 2010 - 07:22 PM in Modifications

Yes, I have even experimented with tire valves, but the air out-put was too small.
Yeah, I imagine that a quick air release is necessary.

http://nerfhaven.com...hl=blast button
If you were wondering, this is a thread for a homemade blast button.

#270664 Hornet Tanks

Posted by Airsoftguy777 on 29 March 2010 - 08:39 AM in Modifications

Yes I believe so, but alot of things can be used as blast buttons. Such as the orange thing on the bottom of the titan that the hornet connects to.

I don't entirely understand this, but I'm not really familiar with how that particular mechanism on the Titan works. Anyways I think the point you're trying to make is that anything that can release air from the system and then close air-tight again can be used as a blast button. Is that correct?

Yes, I have even experimented with tire valves, but the air out-put was too small.

#270661 Hornet Tanks

Posted by Airsoftguy777 on 29 March 2010 - 08:12 AM in Modifications

Another thing is make sure you save all the blast buttons. That's how you typically get integrated Hornet tanks to fire.

Each Hornet has three blast buttons, correct? And I assume that the actual trigger mechanism is generally considered too complicated to mess with, right?

I figured it would be appropriate to ask that here and now.

Yes I believe so, but alot of things can be used as blast buttons. Such as the orange thing on the bottom of the titan that the hornet connects to.

#270485 Hornet Tanks

Posted by Airsoftguy777 on 27 March 2010 - 03:39 PM in Modifications

Ok, I had a broken hornet so I decided to try and take out the tanks. I plan on intergrating them into another gun. I tried to find out how they work using the search function but I could not. Could someone help out with a illustration/ explaination?

Thanks in advance

They are back pressure tanks. Have you had any experience with regular pin walve tanks? Well these are similar, when you pump it instead of a spring the airpushes the seal forward. So to fire them you have to release some amount of air, this is where blast buttons come in to the picture. So when you release a little air the seal moves a little letting the rest of the air out.

#270396 Firefly Problem

Posted by Airsoftguy777 on 26 March 2010 - 04:48 PM in Modifications

Should I just screw the removoable turret and restore it to orriginal?

Yes, its pointless anyway unless you have extra turrets.

#270384 Firefly Problem

Posted by Airsoftguy777 on 26 March 2010 - 03:07 PM in Modifications

Your turret to plunger seal isnt good. It is probably because you did the removable turret mod.

#270338 Homemade Air Bladder.

Posted by Airsoftguy777 on 25 March 2010 - 10:44 PM in Homemades

This is great, I actually had the same exact ideas yesterday but still have yet to try them.

#270316 F.a.t?

Posted by Airsoftguy777 on 25 March 2010 - 05:50 PM in Nerf Wars

War is on the second if this happens...Is this still good for everyone?

#270127 How Do I Mod An 'orange Logo Nitefinder'?

Posted by Airsoftguy777 on 23 March 2010 - 08:52 PM in Modifications

Hacksaw, enough said.

#270098 F.a.t?

Posted by Airsoftguy777 on 23 March 2010 - 06:48 PM in Nerf Wars

Come on guys lets make this happen...

Alright guys so who is showing up for this thing? And the second or third is good. If its necessary, What do you guys think?

#269885 Scorpion Ldr

Posted by Airsoftguy777 on 21 March 2010 - 09:52 PM in Homemades

3. Finally, to the people who think my post isn't large or detailed enough: Deal with it. I didn't have much time to put this together, plus I didn't have the pics on the computer I was using. Not to mention that all the details, specs, plus some were included on my page. Also this is my first post, so don't expect me to have the most amazing, jaw dropping posts.

None of those reasons are good excuses. Did you actually read the Code of Conduct? Also, you can't just upload the pictures directly to the forum, so their location is not relevant. Hell, just copy and paste it all from your site. The real issue is that you don't even give any real description of how it operates.

Stop fighting it obviously works similarly to a singled LS, were the breech actually pushes back the plunger.

#269838 F.a.t?

Posted by Airsoftguy777 on 21 March 2010 - 05:00 PM in Nerf Wars

Come on guys lets make this happen...

#269755 At3k Tank Replacement

Posted by Airsoftguy777 on 20 March 2010 - 04:45 PM in General Nerf

Why do you want to replace the tank? It has a very strong tank.
because I want to pump it allot and then I get a bunch of shots. so I don't have to pump for every shot.

You need a bladder hooked up to the tank.

#269740 F.a.t?

Posted by Airsoftguy777 on 20 March 2010 - 01:49 PM in Nerf Wars

April 17th wouldn't work, that's my dad's birthday. The 2nd or 3rd would work I think, or most weekends other than that. I think at my school we have a break for Easter, I'll check on that.

It will probably be the 3rd unless I can get all my school done that week and not have to do anything on friday.