Jump to content

tack66's Content

There have been 40 items by tack66 (Search limited from 11-September 94)

By content type

See this member's

Sort by                Order  

#247474 Short N' Simple:the Big Blast

Posted by tack66 on 18 August 2009 - 01:01 PM in Modifications

Uh...yah it has been done before.But it is part of a series of short ' simple so there.Oh yeah 1 question,do you expect every writeup to be something never before seen?If so don't look at my write up's because i'm not as experienced as some other people.

EDIT:If things go well a new part of the series should be out every week or two.

#247472 Short N' Simple:the Big Blast

Posted by tack66 on 18 August 2009 - 12:50 PM in Modifications

Ok guy's I'm starting a new series of very short very simple mod's that almost anyone can do.
First off here's singling a BBBB.

What you need:
A drill
1 bbbb

Let's get started,now what your going to do is drill out the orange cap so that the long black tube becomes your barrel.

Drill out this:
Posted Image

So it becomes this:
Posted Image

Ranges:60-70 flat but if you sawed down the barrel you could probably get to 90-100.

#247471 Recon O-rings

Posted by tack66 on 18 August 2009 - 12:32 PM in Modifications

You could e-tape the plunger head with no o-ring as a last resort.

#246019 Tech Target Coupler Mod

Posted by tack66 on 07 August 2009 - 08:02 PM in Modifications

Writeup please.

#245187 Executive Marshmallow Blaster Mod

Posted by tack66 on 02 August 2009 - 03:39 PM in Modifications

You are referring to mine "crayola barrels and bad pictures" aren't you?:D

#244612 Marshmallow Blaster Modification

Posted by tack66 on 29 July 2009 - 07:46 PM in Modifications

I used stock darts,with stefans I can get 60 flat and about 20 pumps.Also it is a very short pump ergo time for 50.

#244376 Marshmallow Blaster Modification

Posted by tack66 on 28 July 2009 - 04:08 PM in Modifications

First off material's:
Marshmallow blaster
1 inch pvc
Barrel material


What were working with
Posted Image

First take this piece off
Posted Image

Next cut a piece of PVC off (1 inch ID) also 1 inch in length.
Posted Image

Now drill out the barrel type restrictor thing like so.
Posted Image

Take your barrel material if crayola drill it out if not move on.Now wrap the barrel in e-tape until the barrel fit's like this.
Posted Image

Now apply glue and glue it on like so.
Posted Image

If wanted put this back on for a normal appearance.
Posted Image

Finished product.
Posted Image

Simple yet efficient.Please post any questions and or comments?Ranges 40 foot with 50 pump's(I can pump 50 times in about 15 second's.

#243927 Foamtalk: A Nerf Podcast

Posted by tack66 on 25 July 2009 - 09:18 PM in General Nerf

Thanks for #8 but 1 question I was wondering if they were rated M for mature or not?

#242867 Homemade Arrows

Posted by tack66 on 20 July 2009 - 03:39 PM in Darts and Barrels

Nice I have done this with stuff a plumber left behind for free.:)

#242866 Minnesota Dart Factory Day

Posted by tack66 on 20 July 2009 - 03:29 PM in Darts and Barrels

This is a good idea it should be done for wars on a regular basis.

#242632 Carolinerf/nerf Carolina

Posted by tack66 on 18 July 2009 - 11:53 PM in Nerf Wars

Sorry for double post but Attendance low war postponed/canceled unless influx of attendance.

#242498 Automatic Foam Measurer

Posted by tack66 on 17 July 2009 - 10:02 PM in Homemades

That's what I was thinking and that is very nice.

#242246 Dt Furyfire: A Peak Inside

Posted by tack66 on 16 July 2009 - 03:25 PM in General Nerf

Not what I was expecting are ranges maverick similar?

#242222 Tiny Dart

Posted by tack66 on 16 July 2009 - 01:27 PM in Modifications

Congratulations. You have created a CDDT, an already popular dart. Good job.

I think you mean CDTS or CDTD converted dart tag stefan/dart.

#242173 Tech Target Overhaul

Posted by tack66 on 16 July 2009 - 06:57 AM in Modifications

I've got a couple Tech Targets to try this on but I'm wondering how much noise does it make when firing?

#241697 First Double Shot Mod Ever Attempted

Posted by tack66 on 13 July 2009 - 07:10 AM in Modifications

Very original.Nerfer63 you have advertised that mod in this and my writeup all 3 are different.

#241466 2009 Nerf War Schedule

Posted by tack66 on 11 July 2009 - 04:05 PM in Nerf Wars

july 25th [NC] carolinerf

#240996 Couplered Locking Breech, A New Type

Posted by tack66 on 09 July 2009 - 09:44 AM in Darts and Barrels

Nice idea I have made these playing around but they always broke so I didn't make a writeup.How sturdy are they?

#240934 Double Shot Writeup

Posted by tack66 on 08 July 2009 - 11:06 PM in Modifications

@demo tay26:I was trying to keep it as simple as possible,I took the picture before the gun was fully assembled.
@ white moonlight: No.Again keeping it easy to follow.
@blue:thanks for the tip.I could not figure out how to get the back out.
@nerfer63:I don't think you should link other mods in this thread there are several distinct differences.
@oh1134:keeping the mod simple.
@ner commando:thanks for the tip but as said drill is not working.
@spud spudoni:that doesn't mean it can't be done again.

#240831 I Need Help With My Vulcan.

Posted by tack66 on 08 July 2009 - 03:26 PM in General Nerf

It happens to a lot of people and not many can fix it,but there are multiple ways that it can break that way so of course there are multiple ways to fix it.

#240819 Double Shot Writeup

Posted by tack66 on 08 July 2009 - 02:42 PM in Modifications

How so?

#240815 Double Shot Writeup

Posted by tack66 on 08 July 2009 - 02:32 PM in Modifications

Lets get started

2 ds shells
Double shot

Glue or epoxy

First open your doubleshot keep everything in place except the piece that touches the shells.
Set that piece aside and get your shells out.Stick the knife in the hole like so.
Posted Image
Twist the knife to make the hole larger then use your Dremmel to finish the hole.

To remove the peg take your dremmel and put it inside the hole you made earlier.Make sure this is done at an angle.

Repeat on both shells.

Posted Image
Apply glue to the rubber ring and place the shell on evenly so you get maximum air output.

Finished product
Posted Image
Now take the whole front barrel off the doublshot so its just the stock.
Re-place the string ao it runs out the back like so.This will be the new cocking mecanism.

Put the parts back in place screw the gun back together yada yada yada your done.
Ranges: 40-50 lower forty's with partly modded shell high 40's with fully modded shell.

Posted Image
Posted Image

#240507 Big Bad Bow Mod

Posted by tack66 on 06 July 2009 - 06:45 PM in Modifications

Welcome to the nerfhaven and that is a good first mod (assumption).

#238297 Carolinerf/nerf Carolina

Posted by tack66 on 23 June 2009 - 10:48 PM in Nerf Wars

Host is me or shwanky probably me though.

#238047 Carolinerf/nerf Carolina

Posted by tack66 on 22 June 2009 - 05:33 PM in Nerf Wars

Ok heres my 1 post.I was going to be there I still might be there.I planned the war and everything was fine next day I find out I might be out of town.Since I might/not be there I am planning ahead in case I'm not there.

#238035 The Batarang

Posted by tack66 on 22 June 2009 - 04:09 PM in Modifications

Very nice everythings clean except the air tank a good pj would fix that though.
Overall good mod.

#237874 Carolinerf/nerf Carolina

Posted by tack66 on 21 June 2009 - 08:21 PM in Nerf Wars

NC war I have a park in mind here http://maps.google.c...55&z=13&iwloc=A
click on street view to get an idea of the place.

Sadly I will not be here any volounteers for being the host.

Where: East Allenton Street Mount Gilead North Carolina 27306 on the left can't miss it.

When:July 25 2.00 o'clock-8.00 o'clock

Round types:
Pistol round
2 team deathmatch
# team deathmatch
Every man for himself.

Banned guns:
Singled/plugged titans and bbbb's.

Da Short Un (NHQ +1)

BigJuevos (fu)
Cmdrmack (NH)

Restaurants nearby the ford place,Steves pizza,burger shack.

Post here if you are attending.

#236206 Switchshot Modification

Posted by tack66 on 14 June 2009 - 12:59 PM in Modifications

It malfunctioned I will edit the description.

#236173 Switchshot Modification

Posted by tack66 on 14 June 2009 - 10:16 AM in Modifications

I'm bad at introductions, sorry. The pictures are courtesy of MithMorchaint.
Things needed:
Something to remove the Air restrictor.
A Dremmel.
A screwdriver.
New barrel material.

Posted Image

First open your gun,only the firing part, you don't need the bottom part for this modification.Cut along the black line and then sand it flush with a dremel.
Remove the air restrictor by dremeling with a selected bit..Put your glue of choice to the part that you sanded flush, then add the barrel before it starts drying
You can lube the plunger, add a new spring or give it a paint job.Close the gun, now you're done.The barrel works perfect with stock sonic micro's which is what I
test ranges with.The plunger rod with spring additions is still holding up perfectly.

Ranges 60,57,56,59,61.

You better attempt this mod,. I was stung by a bee in the range test. What I'll do for nerf. P.S you can post this and all my mods on your site just credit me.

#236028 At1k Mod.

Posted by tack66 on 13 June 2009 - 05:07 PM in Modifications

Ignore first two post's i re-used the topic.

#236022 At1k Mod.

Posted by tack66 on 13 June 2009 - 04:43 PM in Modifications

Hi I haven't seen many mods on this gun let's get started.


Open the gun there is a ring on the cocking mechanism dremmel it off.Cut off the end of the turren JUST THE END.
At the front of the plunger tube on opposite side of the view of the picture sand 2 mm off.
Your done.

#234485 Foamtalk: A Nerf Podcast

Posted by tack66 on 05 June 2009 - 03:10 PM in General Nerf

I like the podcasts I thought about this but thought it might not work now I know.

#234484 Ls Quick Open Mod

Posted by tack66 on 05 June 2009 - 03:08 PM in Modifications

Nice 22 screws were keeping me from getting the ls because I mod all guns I have but now I can get it.

#234481 Nerf In Popular Culture

Posted by tack66 on 05 June 2009 - 03:04 PM in General Nerf

I think in Edd,ed and eddy they were shooting nerf guns at each other as part of a scam.

#234477 Tech Target Writeup

Posted by tack66 on 05 June 2009 - 02:51 PM in Modifications

Well it was my brothers gun he wanted the mod/pj done the way it is and I did it the gun looked so bad because
I found it a year later opened it up and did a write-up.

#234467 Tech Target Writeup

Posted by tack66 on 05 June 2009 - 02:38 PM in Modifications

Ok,thanks I like Photobucket.com a lot more than imageshack.

#234455 Tech Target Writeup

Posted by tack66 on 05 June 2009 - 01:59 PM in Modifications

Yes it was to add ranges put 2&2 together 8 minutes about enough time to see what ranges are.

#234433 Tech Target Writeup

Posted by tack66 on 05 June 2009 - 11:29 AM in Modifications

Yes the dart is there .
There is a new catch spring.
The cross hairs are removed.
The barrel is directly on the plunger tube.
I wrapped the entire barrel my brother wanted it that way.

I don't have epoxy.
It's just a little dusty the pj is nice when the gun is clean.

#234426 Wondering What Some Guns Are...

Posted by tack66 on 05 June 2009 - 10:42 AM in General Nerf

The black,green,orange rifle is rapid fire ball blaster zoom in on the barrel and see it.

#234425 Tech Target Writeup

Posted by tack66 on 05 June 2009 - 10:34 AM in Modifications

I'm bad at intro's so let's get started.

Posted Image
Posted Image

First open up your gun,now that it's open put all the screws somewhere they wont get lost.Right now we are going to focus on a barrel replacement.
You can use any barrel you want but I use crayola because their cheap and it fits over the circle on the top of the plunger tube almost perfectly.
To make the replacement take your barrel material and put it over the circle on the top of the plunger tube and glue it on and put e-tape then duct tape over
the glue.

Next we will do a spring addition my combo is the Lanard x-stream air spring with stock spring.To do this unscrew the plunger head and add additional springs.

Posted Image

Now 1. E-tape the plunger to do this I wrap the plunger just below the o-ring in enough tape to be air tight but still slide through the plunger easily.
2. Next need to lube the plunger tube with your choice of lubricant I use different type's I still haven't found one I like.

Next reinforce the gun you can aluminum tape the plunger rod.Make sure that the tape does not hinder performance.

Sometimes when you run the ammo comes out of the holders,to fix this sand out the ammo holders so that cut lengths of PETG,CPVC,Brass etc. can fit then glue them in one side of the gun.

While you wait for that to dry reinforce the plunger head by applying goop,superglue your choice of adhesive to the point where the plunger rod meets plunger head.(for reference see above picture)

Now you want to band the gun to do this get your band of choice.
Posted Image
Put it through the hole in the plunger like so.
Posted Image
Stick one end through the rest of the rubber band.
Posted Image
Pull the band over the gun and let it rest under the barrel but above ammo holders.

(These steps are optional) You have 5 options left A.Close the gun and your done. B.Close the gun and add ammo holders. C.Add a paint job. D. Integrate a secret strike where ammo holders are. E. A combination of B-D

To do B. you can cut length's of C-PVC and glue them to the gun.

To do C. it should be self-explanatory but there are plenty of guides on NH,NHQ and FU.

To do D. Dremmel down the shell where ammo holders are to fit the gun and glue the secret strike to the shell on 1 side only unless you do not plan on re-opening the gun.

Ranges 50 ft flat with stock darts.EDIT: should be getting stefans soon so there will be new ranges

Thanks for reading.