- NerfHaven
- → sharpshooter35's Content
sharpshooter35's Content
There have been 10 items by sharpshooter35 (Search limited from 11-November 96)
#302280 Singled Longstrike
Posted by sharpshooter35 on 26 July 2011 - 12:57 AM in Modifications
#302219 Singled Longstrike
Posted by sharpshooter35 on 25 July 2011 - 11:47 AM in Modifications
#302209 Singled Longstrike
Posted by sharpshooter35 on 25 July 2011 - 01:35 AM in Modifications
Let's Get it Started...worst way to start ever.
Materials Needed:
Longstrike
Screwdrivers
Sandpaper or dremel sandbit
CPVC and CPVC T thing
E-Tape and Plumbers Goop
Hacksaw or Dremel Cutting bit
Of course the first thing your going to need to do is remove the air restrictors.
Next, you're going to cut right behind that nub type thing on the bolt.
http://www.flickr.co...in/photostream/
Then, put the bolt in the T. Sanding may be necessary.
http://www.flickr.co...in/photostream/
After this, put some kind of priming handle, usually a length of CPVC, on the T and plug it with either foam or an endcap,which I did not have accessible.
http://www.flickr.co...in/photostream/
The last thing you're going to do is cut the dart tooth receptive thingy (Seen in the picture below) so it can receive the barrel, a length of at least 4 inch CPVC.
It should end up looking like this.
http://www.flickr.co...in/photostream/
Finished Product
http://www.flickr.co...in/photostream/
This performs on par with my singled longshot with a [k26] spring.
Happy Modding!
Ranges:
41'
43'
53'
57'
63'
69'(hehe)
I believe this mod is capable of hitting ranges of 100' angled and if the wind isn't going the wrong way.
#300411 Dart-a-Palooza Chicago #2
Posted by sharpshooter35 on 23 June 2011 - 12:36 PM in Nerf Wars
#300199 M.A.N.O. 5.0
Posted by sharpshooter35 on 20 June 2011 - 01:13 AM in Nerf Wars
#297693 Octo-Shot
Posted by sharpshooter35 on 29 April 2011 - 01:44 PM in Modifications
#295411 Help! I Need Help Puting My Raider Back Together
Posted by sharpshooter35 on 05 March 2011 - 06:22 PM in Modifications
#293987 Raider First Mod
Posted by sharpshooter35 on 06 February 2011 - 10:53 AM in Modifications
Thanks for the advice about the goop, as soon as I get some JB weld or epoxy I'll switch it out. As I said before, I'm a beginnerYou should remove the goop and replace it with a stronger adhesive, such as epoxy or JB Weld. Goop is not a great adhesive for this situation. Oh, and nice website on that computer.
#293968 Raider First Mod
Posted by sharpshooter35 on 06 February 2011 - 01:28 AM in Modifications
i just stuck the barrel in, it works well thoughThis should go in the Mods/Paintjobs thread.
Did you breech it or just stick a barrel in?
#293961 Raider First Mod
Posted by sharpshooter35 on 05 February 2011 - 11:37 PM in Modifications
Then I found some kind of heavy metallic tubing, and I thought it would be perfect for a barrel. At first the tubing wouldn't go throught the hole in the front of the gun, so I had to widen it. I secured it with pumbers goop and I closed the gun up, test fired and it worked.
Finished Product
- NerfHaven
- → sharpshooter35's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·