bamblack2000's Content
There have been 113 items by bamblack2000 (Search limited from 04-December 96)
#250548 Modified Berserker With Integrated 3k
Posted by
on 15 September 2009 - 08:52 PM
in
Modifications
#248330 Fixed.
Posted by
on 23 August 2009 - 08:06 PM
in
Modifications
{/topic}
#248323 Fixed.
Posted by
on 23 August 2009 - 07:08 PM
in
Modifications
I'm just shooting to get lucky at this point, with a great seal (and everything else seems good) I don't know what else it could be...
pic
This seems to be broken, is it? Maybe when you push your thumb against this (when you test the seal), you are pushing it back together (assuming the epoxy is cracked) so the seal is nice. But when you have a barrel, the air escapes from here from the lack of pressure. Try pushing back on the barrel when it's loaded and see if it fires.
With or without holding the barrel, stock darts have finally come out of the barrel, not stefans, just stock micros, all about a foot each...
So no difference.
#248310 Fixed.
Posted by
on 23 August 2009 - 04:30 PM
in
Modifications
Does the barrel work on other guns?
Of course...
Does other barrels work on the gun?
Considering how it has a CPVC Coupler I haven't had the opportunity to try.
#248308 Fixed.
Posted by
on 23 August 2009 - 03:46 PM
in
Modifications
I'm only using the stock spring. My local hardware doesn't have any silcone grease...so I'm stuck with this.
Theres your problem. You need a new spring or to add more springs to the stock one. If you have a TTG spring add that or if you have a DTB and SF spring add those. Another good option is an ace 49 spring.
The dart won't escape the barrel... The stock spring has enough power to get a dart out of a 3" barrel. Cutting the coupler in half won't solve that problem either. Yes, both of your answers will help the performance, but it's not why the dart is getting stuck.
If I had to guess without a picture, I'd say it's the plunger head seal. When you say it's "air tight", how do you test this?
I prime the gun, I cover the coupler with my thumb and it stops halfway once I fire it. Then if I take my finger off, it shoots the other halfway
#248300 Fixed.
Posted by
on 23 August 2009 - 03:13 PM
in
Modifications
Can we get a pic or description of the plunger head?
Also, how tight are the darts you're trying to use?
If the plunger head seal is slightly bad and your darts are slightly tight, the darts won't move. Everything else looks ok, I'd check the plunger head and your dart fit.
Edit: In response to Icey, silicone is what 'Slug recommends in his post, and the Liquid Wrench stuff (I fould a description of the can) says it's safe to use on plastics/rubber, so the lube should be fine. Also, the wrong lube would cause the problems I've mentioned above, bad plunger head/tube seal.
I've tried tight stefans, loose stefans, and stock darts. None work.
I have two O-rings on the plunger head. It makes a perfect seal.
Your AR bore hole looks too big, so when you shove the dart in it might be touching the plunger head. ARs are also to prevent that from happening. The dart would actually get stuck in the gap. Type/size of darts and type/size of barrel material would also help. If it's 1/2" PVC, standard suction micros won't fit, but streamlines and 1/2" stefans will.
1/2" cpvc barrel.
I had a similar problem with the same set up just e tape it a little and it should help.
I don't have any e tape on...I tried that once and it didn't work
Try cutting the coupler down by half, this helps on decreasing dead-space. Also, if you have any E-tape under the o-rings I would suggest taking it off and just use 2 stock NF o-rings. Also your spring power may be a large problem. Lastly dry off your o-ring(s) and lube it with some silcone grease, can easily be found at ace or any hardware store, danco o-ring lubricant is great stuff by the way.
EDIT: Also I usually do this to all my NF's, superglue the air restrictor plate and ring together.
I'm only using the stock spring. My local hardware doesn't have any silcone grease...so I'm stuck with this.
I'll try that I suppose. (cutting it in half)
#248284 Fixed.
Posted by
on 23 August 2009 - 01:50 PM
in
Modifications
#220433 Guru Mk. iii
Posted by
on 29 March 2009 - 10:27 AM
in
Homemades
Slug you're insane. Nice job.
#220263 Sm1500 With A Snap Inside.
Posted by
on 28 March 2009 - 10:21 AM
in
Modifications
Great job. If I'm correct this is one of your first mods and I'm impressed. I can't wait to see the intergration thing your going to put in there.
Is there any chance it could have a turret?
#217545 At2k Plasma Pistol
Posted by
on 11 March 2009 - 09:31 PM
in
Modifications
Salindin, good job on it. I'm confused why you used brass (the 19/32) instead of a coupler or something, but it works either way. Nice job.
#217473 Just Another Maverick Mod
Posted by
on 11 March 2009 - 05:00 PM
in
Modifications
#217401 Longshot Modification.
Posted by
on 10 March 2009 - 08:54 PM
in
Modifications
Can everyone stop posting? It was a necro and there is no need to post. Especially since no one has anything to contribute?
Oh and just to let you know FA24 and hereicorp have slightly different breechs, not to get you confused.
#217028 Angel Breech
Posted by
on 08 March 2009 - 10:14 PM
in
General Nerf
hahahha for &250 i could by sooo many feet of brass and even a crossbow(heheh). =P
What the hell happened tonight? Did the planets align causing a wave of stupidity to hit the earth?
#217008 Longshot Bolt Breakage
Posted by
on 08 March 2009 - 08:24 PM
in
Modifications
Insert a lot of stupid text here
You do realize that the post before you was in 2006 correct?
I would hurry and apologize before you get banned, as I'm sure we're all counting the seconds now.
#217004 Quick Maverick Question
Posted by
on 08 March 2009 - 07:45 PM
in
Modifications
It's just under an inch and a half.
Exactly what I needed.
Thanks everyone. There's no need to post anymore.
#217000 Quick Maverick Question
Posted by
on 08 March 2009 - 07:41 PM
in
Modifications
#216998 Quick Maverick Question
Posted by
on 08 March 2009 - 07:36 PM
in
Modifications
I am referring to the reinforcement, precisely like that mod. HOWEVER, he bought his materials from his local hardware store, whereas mine doesn't have any.
Can't someone with a maverick measure how thick the sliding bar is? I just need to know a quick size.
#216968 Quick Maverick Question
Posted by
on 08 March 2009 - 05:50 PM
in
Modifications
With this I'm going to look to purchase it from mcmaster, so what nut should I purchase as well.
Thanks
#215295 So I Modded My Rf20
Posted by
on 26 February 2009 - 11:44 PM
in
Modifications
Ramrod 20 darts in, pump it 120-150 times, and unleash the pain. Ranges are yet to be determined, but I believe this is the farthest shooting rf20.
Are you kidding me? 120-150 pumps? Let's hope you are kidding.
#215026 Mcno & Gankfest 3
Posted by
on 25 February 2009 - 09:31 PM
in
Nerf Wars
#214816 New Raider CS-35 Speculation Thread
Posted by
on 24 February 2009 - 10:20 PM
in
General Nerf
I think it's a pump action recon in disguise.
#214814 Ok I Really Need Some Help Here
Posted by
on 24 February 2009 - 10:17 PM
in
Modifications
Goddamnit! It seems this has been happening to a lot of people lately. An error comes up, they back out, hit the post button, but the browser has already posted. Fuck!
Yea I think it has something to do with the bandwidth. Not sure though.
#214788 Ok I Really Need Some Help Here
Posted by
on 24 February 2009 - 09:30 PM
in
Modifications
#213950 Mcno & Gankfest 3
Posted by
on 21 February 2009 - 05:06 PM
in
Nerf Wars
#213947 Xbox Live Recreational Community House ---
Posted by
on 21 February 2009 - 05:05 PM
in
Off Topic
It was fun playing with vvolf3 but we need more people. Shoot me a friends request.
#213506 New Raider CS-35 Speculation Thread
Posted by
on 19 February 2009 - 04:26 PM
in
General Nerf
So its spring powered? Or air?
Definitely Spring
#212940 Best Foam
Posted by
on 16 February 2009 - 10:46 PM
in
General Nerf
herticorp(hate his darts)
First you should spell his name right. Second, you shouldn't hate on someone just because there foam isn't 100% to your liking.
Search next time...
#212930 Official "show-off Your Crossbow" Thread
Posted by
on 16 February 2009 - 10:21 PM
in
Modifications
Name: None
Mods Done: Level 4
Integrations: 2k Intergrated Splitlip/Coop style. Done by Splitlip.
Comments: Got this from Soothsayer who said it was a level two crossbow when it was literally crap. It had nothing but e-tape around the original barrel. Split redid the internals for me and did the intergration and now its a charm. Although the trigger for the at2k has fallen off, it works lovely.
And it's for sale....soon...
#212401 Xbox Live Recreational Community House ---
Posted by
on 15 February 2009 - 12:17 PM
in
Off Topic
Everyone shut the fuck up, and settle this like men. Call of Duty 4 match tonight, 11:30 EST.
Bad Idea.
Tonight at 6:00 P.M. Eastern I'll be on Call of duty 4, message me or hit me with a friends request if you want to play. I'll be on a lot before hand too.
#212273 Xbox Live Recreational Community House ---
Posted by
on 14 February 2009 - 06:36 PM
in
Off Topic
#211641 Ertl Pump Action Shotgun Help?
Posted by
on 11 February 2009 - 10:28 PM
in
Modifications
#211305 Clash Of The Coasts!
Posted by
on 10 February 2009 - 10:02 PM
in
Nerf Wars
Please people I need more people to come. (if this is considered necroing sorry.)
It's not considered a necro because it's an upcoming war.
I'm a maybe, however I will most likely come, as I do live 10 minutes away...
#209763 Quick Question
Posted by
on 05 February 2009 - 07:22 PM
in
General Nerf
The eagle eye in power has got to be a pistol. It could be a primary indoors if you do a FA style one but still, it is somewhat lacking, in my opinion.
In size however, it has got to be at least a secondary. Unless you somehow find a way to minimize it you just cannot consider it a pistol.
Either way I would go against buying one if you are interested in one. The ranges suck and size is an issue.
#206363 Quick Question
Posted by
on 25 January 2009 - 05:50 PM
in
General Nerf
P.S. Put these things in Modifications.
#205989 Modifying A Longshot?
Posted by
on 24 January 2009 - 03:58 PM
in
Modifications
You need a pair of needle nose pliers and some muscle.
I thought I had to drill something, is this true?
Yes...haven't you ever tried or looked at it.
#205973 Modifying A Longshot?
Posted by
on 24 January 2009 - 02:57 PM
in
Modifications
Hi, I added a Nite Finder spring to my longshot and the range SUCKS. Do I have to do AR removal, because I really don't want to mess up on the drilling and break it. Any suggestions other than AR removal?
Thanks,
Bambampker
I still don't get what's so hard about the AR. You need a pair of needle nose pliers and some muscle. But if you want to keep it in your going to still get bad ranges. You can put e-tape over the hole though, as I doubt that someone who is scared to remove an AR can pull something off like a plunger head replacement.
#202766 Firefly Mods
Posted by
on 11 January 2009 - 10:46 PM
in
Modifications
#202344 Modification and Paintjob Pictures
Posted by
on 10 January 2009 - 12:44 PM
in
Modifications
Up close on front:
And the last thing you will see:
#201939 Pump Problem
Posted by
on 08 January 2009 - 07:59 PM
in
Modifications
I had to glue/goop/a bunch of other types of adhesive...
Did you us hot glue and plastic tubing? Sometimes if the heat is too high it would melt through the tubing, sometimes even the glue. That or the inside check valve are the problems that I can think of.
#201173 Scorpion Bow Mod Help
Posted by
on 04 January 2009 - 10:06 PM
in
Modifications
